I can access the files on my PC via USB using Resco Explorer but when I try with WiFi it says "Cannot connect shared path. The network path was not found." Can someone help?
Generally that means you do NOT have NetBIOS enabled over TCP/IP in your network adapter that connects to the Wireless connection. The Pocket PC must be able to ping your PC by name, and have it correctly return the IP address of your PC.
Iv used resco in the past older version and it worked i was able to access my sharedfolder on my PC, making sure my firewall was switchedoff, but with the new resco version with firewall off, i see my pc and when i try to expand folders i get a login screen (on PDA) asking for username password and domain, tried my usual stuff doesnt work might be doing something wrong,
try deactivating any firewalls you hve and give ita try if it works you can allways make an exception in your firewall to allow your pda access to your PC.
good luck keep the thread updated
Enabled NetBIOS, dropped the firewalls and everything worked perfectly- Then put them back up and everythings still working!
Thanks for the help guys- I don't know what I would do without yous.
-Adam
Hi Guys,
Everything is working fine for me only when my firewall is off. Once my firewall is up, i get the same messages as the original poster.
I am using Norton Internet security. Can anyone please tell me what settings need to be changed in Norton Internet Security to allow my PDA to access my notebook? Would really appreciate it.
Regards,
UD.
Oh well, just answered my own question.
Just ran the network wizard in NIS and it figured everything out itself Streaming rocks!!!
Related
Hi All,
Do I need to do anything special to use ActiveSync over a wireless connection ? The wireless connection is setup and working fine, I can ping from PPC to PC etc etc. I have configured the connection settings in ActiveSync to accept connections over ethernet. The network says available. I guess that I don't need to connect in ActiveSync on the PPC, just press Sync ?
Any help appreciated.
Thanks,
Rob.
Anyone ?
I am having exactly this problem. Have tried adding the PC's IP address as the wins server - that didn't work and am now wondering if an hosts file is required??? I can connect to the PC through file manager using the name or the IP address so it really doesn't seem to make sense.
philip
I am now absolutely sure that it is a resolution problem. I tried it on my work network which has local DNS and it worked straight away. I guess that the answer will lie in an hosts file although it's been a few years since I've worked with hosts so I'll let yo know if I have any joy.
philip
May be this is what you people need. Hopefully it helps.
http://www.wifizard.com/tutorialsXP/sync/index.htm
Thanks! It looks as if Microsoft give their devices default names that their own naming system refuses to recognise (Pocket_PC) - I guess that it is what we have come to expect of MS! I've renamed my device and will try again when I get home. Thanks again for the lead.
philip
The group is generally quiet on this one. I have a problem getting ActiveSync to work over a wireless network. The wireless network is otherwise faultless. Can browse the internet, transfer files between servers etc but cannot perform a sync to my laptop. The laptop is also faultless on the wireless network and Activesync works fine via the cradle. All firewalls and other clever stuff on the laptop disabled.
The symptoms are that a connection starts but never gets fully established. Then it all stops. I have recently performed a hard reset on the palmtop and rebuilt the image (for other reasons) but this problem has not changed as a result of this process.
I have filddled with setting the network settings to connection via the internet and from work but that doesn't seem to make much difference. I'm beginning to run out of ideas.
Any help most appreciated fellow globe dwellers!
Thanks
AA
Hi AlliterationArtiste,
I had it working on a previous PocketPc, and I think that it was having the ip address for the pc that made the difference for me.
You PocketPc probably only knows the name of your pc, and if it can't get that name resolved to an ip address anywhere, you are sol.
What I did was install an app called Pocket Host. It acts like the local host file on a pc. I put my pc name and its ip in the app, and then it worked.
I have since switched to dhcp which ruins the solution...
here is a link from Handango:
http://www.handango.com/PlatformPro...tType=2&catalog=0§ionId=0&productId=54305
Just a thought, and worth a try.
Torben
You're a wizard!! This worked perfectly.
The whole thing was made more interesting because I run vmware on my laptop and so there are several ip addresses that the machine can respond to. I used to sometimes get a connection but now thanks to your excellent suggestion I can a 100% reliable connection
Thankyou
I have searched everywhere (here and on other sites) and it seems like if I tell the activesync to pass through to the internet, I should have internet on my pda when connected via usb...
This is not happening! I went through all options and used a few troubleshooting things that nobody seems to mention (like ipconfig from the ppc msdos console) and I can't figure this out at all!
I am using a wallaby (siemens sx56) plugged into my laptop, which is wirelessly connected via home network into cable modem. I put every .exe file in the program files/activesync directory on the "pass through" list of the firewall.
When activesync connects, all looks normal unless I try to get online via ie (from the pocket pc). If I go to the ppc dos prompt and try ipconfig, it reads me back 192.168.55.101 as the ip address, and 192.168.55.100 as the gateway. These are not close to my network settings. It can't ping my laptop and my laptop can't ping the ppc using the above address.
What am I missing??? I am using xda-developers operating system and activesync 3.8 on my laptop. PLEASE HELP!!!!
ps. I am planning on getting a wireless card for the ppc - might I still have this problem when I try to connect using that too??
Thanks -- AshayinFLA
wallaby's SD interface dont support SDIO which are wifi and well everything but memory SD cards require
so getting wifi will not help you
activesync have some settings related to sharing the connection
so theres no way to get this thing online (except pay for cellular service or <supposedly> through usb cable)?
That sucks!
Anyway, as for the usb thing, I looked through activesync on my laptop and the only thing i could find is where it should connect to (internet or work). I tried both with no results. Is there anything I'm missing?
-- AshayinFLA
G'day all,
Well I got my jasjar today, and essentially I was originally under the impression that with this I would be able to use the wireless technologies of my laptop and jasjar to sync outlook, and browse the fiels on the notebook etc.
Then reality hit me.
You cannot sync via wireless. Then as it turns out I have no clue on how to setup a wireless network..
So im just wondering if anyone can inform me, is it possible for my jasjar and centrino notebook to communicate with each other wirelessly? If so what do I need to do in order to do that.
Thanks in advance
a very confused wireless enthusiast.
ActiveSync will not work on wi-fi, but you can setup a device-to-device network and use files on a share on your computer. If your Centrino has Bluetooth, you can use ActiveSync with that.
i have AS over bluetooth fine, and allows me to browse the internet etc
i have WIFI configured at home and work which allows me to browse shared folders with passwords and permission, run terminal server to my XP and our Terminal Server, and allows me to run Terminal Server over wireless over the internet direct to my remote work servers.
so it really depends on what you want to achieve, it will more than likely be a combination solution.
WIFI <> AS
WIFI = Internet and Shares and Terminal Server
WIFI = Streaming music and videos
Bluetooth = AS
Bluetooth = Internet
Bluetooth <> Shares and Terminal Server
Well my laptop doesnt have bluetooth so that is no good to me.
Yeah I just want to access the laptops music, video or documents wirelessly. Im a little or completely lost as how to do this, I do not have broadband, and I have no networking experience really.
All I have is a Centrino laptop armed with the latest wifi components, and a jasjar.
I managed to make a device-to-device connection as someone suggested, and the devices appeared to connect, but I couldnt seem to do anything with them as such.
Try Resco Explorer (www.resco.net) It allows you to map network drives (once you have your device-to-device connection sorted)
Wiz - Off topic but can you share how you got your O2 Exec Blackberry Enabled? I'd like to do the same. Ta - philg
Got resco explorer, gotta say thats a handy lil feature packed app. But to my problem at hand....does anyone have or can anyone give me a run down of how to get a device-to-device networking happenng.
I can get the two devices to connect as such via wifi, both jasjar says connected as does XP, however when I go to map a network drive, in Resco or XP fo rthat matter, I just an a message saying no computer is connected or availbe. This despite the fact that it is right there!!
Any suggestions, tutorial recommendations?
Thanks.
r u using xp pro or home?
what sort of antivirus r u running?
firewall? ms or other
any other security settings imposed?
generally, go to pc, find folder u want to connect to, RMC, properties, sharing, enable with a name you like, apply security with password (nb sharinmg over wifi will allow others to access without security).
goto pda, resco, map drive, type in \\computername\sharename, enter your username to log onto pc and password (assuming these were the same pemissions you applied when setting up)
I had this working using a wifi access point via a local router, but norton screwed it up and been unable to fix....
Yes XP Pro
Default Network Security really, like I said ive never really used them or accessed the features so usually keep em closed.
and running NIS 2005. But yeah look im not a total noob, ie I disabled NIS at one point to see if that was hampering the connections, and even enabled it and enabled full access and that did nothing either.
what you suggested I pretty much did.
however, when ive set up the device to device connection it gives me security options ie WEP WPA etc, done these restrict other networks from using the shared folder?
I ask because there are a fare few wireless networks around me, wouldnt want to give any of them access to my stuff, even if it is only my music and some documents.
If you start your WIFI on your PPC and PC, does the WIFI icon on the PPC create the connection, ie the antennae and two arrows that remain still.
If so, then you have got the connection to the PC, we just then need to get the folders and access to each other. If not, then we cant get any further till we resolve this issue.
RMC My Computer or go to control panel system. Far right Tab allow remote connections, tick the box to allow. This should allow a Terminal Server connection from your PPC to your PC. So find out the IP of your PC, then open TSC and enter the same IP address and see if it connects. If it starts to get create a connection via GPRS/3G cancel it. This will be due to the "My Work" and "Internet" settings which we will have to come back to.
If it you can open a TSC then you have established the WIFI and can create and authenticate a connection, so it means we have a problem with the foler sharing.
So in summary, doing the above will:
1. Estabish that the WIFI connection using WEP is working
2. That you are connecting over the same common network using TSC to connect and control your PC from your PPC
3. THat the problems are folder sharing related
Let me know how you go.
I wont be able to try these suggestions until tomorrow but im pretty confident one of these will work, thanks for taking the time, I will definitely try em tomorrow.
But just for what information I have ATM, yes the wifi icon you described is there, so like I said the PPC is definitely connecting, just when its connected I dont seem to be able to do much.
Will let you know how I go
THanks again
I have resolved the problem that I have been having with connecting to a network share, when I could before and cant now....
The answer was simple, and I cant believe how simple.
The answer was found here, and posted by DUTCH
http://forum.xda-developers.com/viewtopic.php?t=21317&highlight=network+wifi+connection+share
"Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings."
If your not sure where this is let me know, but it provided and immediate fix for me. ...
Well, actually, I did two things simultaneously, so not sure which actually worked. I also went into the specific connectsion > Network Cards on the PPC, Network Adapter set to work, then Wireless tab, found the specific network opened this and changed this from internet to work.
So the combineation of the IP settings and the change from internet to work allows my ppc to connect to my computers folder shares.
well, i tested it furter.
If i left the work setting on my network, then when I used the internet, it opened and connected a gprs connection to open the web site.
so i changed the network connect back to "the internet", and was able to use the network card to connect to the internet and access the web.
I was also STILL able to access a network share whilst the network connected to "the internet", so the solution for me was
"Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings."
So I want to use remote desktop on my TP2 to connect to my laptop at home. I've done all the requirements to allow to use this feature; I've enabled port forwarding in my router settings and I have enabled remote desktop on my laptop's Windows 7 system properties. And on my TP2 I enter my ip address for the "computer" field, my Windows 7 account user name in the "user name" field (I only have 1 account on my laptop and it is admin), and the account password in the "password" field. After all of this, my TP2 will still not connect to my laptop. At this point I am pulling my hair out trying to figure out what I am doing wrong. Can anybody help?
Does your computer has public IP Address?
Yes. I go to www.whatismyip.com and it displays my ip address. I've tried entering this address in the "computer" field as well and nothing.
you'll need to forward port 3389 through any router you may be using (check out portforward.com)
you'll also need to enable RDP connection on the machine through System>Remote.
there are 1001 guides you'll find with a quick google, its not a phone specific thing.
edit: ive previously found that the WM RDP client wont start a 'net connection itself. if you find the same, just do it manually through com manager or check ur mail etc.
Did you forward port 3389 to the internal ip address of your laptop?
Do you have a software firewall on the laptop that may be blocking access?
First try to figure out where the error occurs.
Try to connect to your pc, using an other pc ( from outside )
If it works, it must be a setting in your mobile device.
If pc also doesnt work, it should be a port problem, in that case, try using hamachi..
Oh, and check if you dont have a blocking program, or firewall .. like suggested above
Does my phone need to be connected to wi-fi in order to use remote desktop or will it just use my carrier's data service?
develop1 said:
Does my phone need to be connected to wi-fi in order to use remote desktop or will it just use my carrier's data service?
Click to expand...
Click to collapse
it will use any data connection available, no need to connect to wifi if you have data plan activated.
some tips:
1. you must have NAT (port forwarding) configured in your router
2. If your router has public IP address on WAN port, then point 1. is just sufficient if you are on some routed network, than you need to ask your provider, maybe you will be lucky
2.1. (here are network ranges used as private, only for identification)
from 192.168.0.0 to 192.168.255.255
from 172.16.0.0 to 172.31.255.255
from 10.0.0.0 to 10.255.255.255
3. point 1. specification - enable NAT from WAN port to local IP address of your computer, specific port is TCP 3389. Also is good to make a reservation on DHCP server for this PC.
4. you need to enable remote desktop on your PC
4.1. computer properties - remote desktop setup - and its middle line on remote desktop settings
4.2. click "choose users" and check if your account is listed
Thanks alot to everybody's help! Your advise allowed me to get this things working, I really appreciate it. I had the port open and had remote desktop enabled on my computer but the thing that was killing me was I had the windows firewall on and my ESET Smart Security firewall on as well. Once I disabled them I was able to make the connection. What a head ache those firewalls gave me. I thank you all once again for your assistance.
I want to remotely access my PC from TP2, what software do I need to install on my phone?
sheharyar said:
I want to remotely access my PC from TP2, what software do I need to install on my phone?
Click to expand...
Click to collapse
The answer depends on what you have available to connect to. Your network (if any exists) and the machine/OS you want to connect to.
If you could let me know the following, I'll see if I can help:
How you machine's connected to the net. (for example, mines something like PC>Router>Cable modem>outside world).
The operating syustem in use on your PC. Specifically please, the edition and version is important to know. Mine's Windows 7 Ultimate, for example.
but, to cut a long story short: if you're not using a home edition of one of the recent windows OSs (XP and later), I'd suggest Remote desktop's the best way to go. There's a .cab knocking around here if you don't already have it on your phone and the PC end's described in the 'Configure Remote Desktop' and 'Configure Your Router' bits of this page: http://www.microsoft.com/windowsxp/using/networking/expert/northrup_03may16.mspx (ignore the other sections, they're not relevant unless you're running IIS)
enjoy
I have a WIFI Router installed, have a laptop with VISTA ULTIMATE and PC with XP Professional.
I am already able to RD my laptop from my PC.
I want to RDS my laptop from my phone via the same network/WIFI. I think it is pretty simple.
This is what I am doing
I have installed Remote Desktop Mobile
I have connected to WIFI
when I run Remote Desktop Mobile & enter my laptop's name, with username and password and click connect, connecting remains on top and is not connecting it. I am not in any domain, do i have to leave the domain name empty?
if you're not using a domain, leaving it blank's right.
Does it just time out on your phone?
Do you get the same if you try connecting via IP instead of your machine's name?
mad_tunes said:
if you're not using a domain, leaving it blank's right.
Does it just time out on your phone?
Do you get the same if you try connecting via IP instead of your machine's name?
Click to expand...
Click to collapse
I am able to connect from my pc.
When I try to connect from my phone either by IP or computer name, it does not even time out, it just remains stuck at Connecting...
Nothing happens after 5 minutes, even no error message appears.
sheharyar said:
I am able to connect from my pc.
When I try to connect from my phone either by IP or computer name, it does not even time out, it just remains stuck at Connecting...
Nothing happens after 5 minutes, even no error message appears.
Click to expand...
Click to collapse
Your laptop seems to be configured well ( you can access it using the pc )
So it must be a setting in the phone. You sure it is connected to wifi , maybe it stays on 3g ) Or maybe your laptop only allowes 1 ip to connect ( the pc's ip )
I am even able to connect to my laptop over internet as the port 3389 is fwd.
Do I have to configure anything on my phone other than installing that cab file?
Or maybe the cab file I've installed is corrupt or something, can someone please share the cab file?