Activesync over Wireless - MDA II, XDA II, 2060 General

The group is generally quiet on this one. I have a problem getting ActiveSync to work over a wireless network. The wireless network is otherwise faultless. Can browse the internet, transfer files between servers etc but cannot perform a sync to my laptop. The laptop is also faultless on the wireless network and Activesync works fine via the cradle. All firewalls and other clever stuff on the laptop disabled.
The symptoms are that a connection starts but never gets fully established. Then it all stops. I have recently performed a hard reset on the palmtop and rebuilt the image (for other reasons) but this problem has not changed as a result of this process.
I have filddled with setting the network settings to connection via the internet and from work but that doesn't seem to make much difference. I'm beginning to run out of ideas.
Any help most appreciated fellow globe dwellers!
Thanks
AA

Hi AlliterationArtiste,
I had it working on a previous PocketPc, and I think that it was having the ip address for the pc that made the difference for me.
You PocketPc probably only knows the name of your pc, and if it can't get that name resolved to an ip address anywhere, you are sol.
What I did was install an app called Pocket Host. It acts like the local host file on a pc. I put my pc name and its ip in the app, and then it worked.
I have since switched to dhcp which ruins the solution...
here is a link from Handango:
http://www.handango.com/PlatformPro...tType=2&catalog=0&sectionId=0&productId=54305
Just a thought, and worth a try.
Torben

You're a wizard!! This worked perfectly.
The whole thing was made more interesting because I run vmware on my laptop and so there are several ip addresses that the machine can respond to. I used to sometimes get a connection but now thanks to your excellent suggestion I can a 100% reliable connection
Thankyou

Related

ActiveSync over Wireless Connection :/

Hi All,
Do I need to do anything special to use ActiveSync over a wireless connection ? The wireless connection is setup and working fine, I can ping from PPC to PC etc etc. I have configured the connection settings in ActiveSync to accept connections over ethernet. The network says available. I guess that I don't need to connect in ActiveSync on the PPC, just press Sync ?
Any help appreciated.
Thanks,
Rob.
Anyone ?
I am having exactly this problem. Have tried adding the PC's IP address as the wins server - that didn't work and am now wondering if an hosts file is required??? I can connect to the PC through file manager using the name or the IP address so it really doesn't seem to make sense.
philip
I am now absolutely sure that it is a resolution problem. I tried it on my work network which has local DNS and it worked straight away. I guess that the answer will lie in an hosts file although it's been a few years since I've worked with hosts so I'll let yo know if I have any joy.
philip
May be this is what you people need. Hopefully it helps.
http://www.wifizard.com/tutorialsXP/sync/index.htm
Thanks! It looks as if Microsoft give their devices default names that their own naming system refuses to recognise (Pocket_PC) - I guess that it is what we have come to expect of MS! I've renamed my device and will try again when I get home. Thanks again for the lead.
philip

Internet via bluetooth?

Hi all
Firstly apologies if this has been discussed elsewhere. Searching bluetooth returns ... too many results to sift through.
OK, I have this setup. I connect my laptop to the net using either the router OR network cable. My laptop is equipped with BT.
Is there any way to browse the net from my PDA, by establishing a BT connection from XDA2 to the Laptop?
I know it would be a doddle (I hope) if I were to purchase a wifi SD card, but if I can avoid the expense it would be great.
Thanks in advance.
One way would be through BlueTooth ActiveSync. As when in the cradle, when your PPC is connected to your PC through ActiveSync, internet connectivity is through the PC. I use it whenever I am in proximity to my BT laptop. Works well!
If you go to Options in ActiveSync, click the Rules tab, check Open ActiveSync when my mobile device connects. and have the Connection set to The Internet or Work depending how your network is set up. Then establish an ActiveSync connection (USB, serial, Bluetooth or IrDA) and it will allow you use Internet programs like PocketIE, Pocket Outlook, etc.[/b]
I thank you both for your very very quick response.
Yes, both methods work. YIPEEEEEEEEEEEEEEEEEE
I am one happy bunny.
Cheers
Going insane bluetooth activesync internet
I wish I could be so happy. Let me give a brief overview of the last 6 hours:
Installed bluetooth dongle on the work PC - eventually got it connecting to the XDA2.
I have now managed to get a connection with activesync which seems to be quite robust and synchronises ok.
I am now trying to get on the internet via my active sync bluetooth connection (and tearing my hair out)
My network management is now set to a new connection I have created call 'My Work' no modem set up with the proxy settings set to those required on my work LAN. No VPN set up.
Have set the pass through on the PC to work, internet and open activesync to enable and disable but can't get ti to connect. Please help!!!!!
Going insane bluetooth activesync internet
I wish I could be so happy. Let me give a brief overview of the last 6 hours:
Installed bluetooth dongle on the work PC - eventually got it connecting to the XDA2.
I have now managed to get a connection with activesync which seems to be quite robust and synchronises ok.
I am now trying to get on the internet via my active sync bluetooth connection (and tearing my hair out)
My network management is now set to a new connection I have created call 'My Work' no modem set up with the proxy settings set to those required on my work LAN. No VPN set up.
Have set the pass through on the PC to work, internet and open activesync to enable and disable but can't get ti to connect. Please help!!!!!
maybe it's a firewall issue
try messing around with the ping program
on your pocketpc and see if you can ping the ip of your computer
and on it's gateway and dns
also make sure your dns settings on your pocketpc is set to the same as your pc
pocket ping
http://www.pocketgear.com/software_detail.asp?id=11879
Thanks for the advice. Bit stumped really:
My PC has a static IP address (10.130.16.84) I run pocket ping on the XDA and it says it's IP address is 192.168.55.101 the network is DHCP enabled. Neither of them can ping the other one (so there is no way I can connect to the proxy from my XDA2). Any ideas why my IP address isn't in our LAN range.
Just out of interest I can use a Dell X3i and connect to the network wirelessly no problem at all.
Further to baffle everyone - If i disconnect bluetooth and cradle it. I get the same Ip address but can connect to the internet no problem! So this would lead me to believe that all the connection and activesync settings are correct.
not sure here are some guides
http://www.geekzone.co.nz/content.asp?ContentId=449
Thanks for the help but the guides didn't fix the problem.
I eventually got it working (and a better bluetooth connection in the process) by downloading the slightly newer version of the XTND Blue Manager software http://www.windigosys.com/support.htm
I can now suft the internet on the XDA over activesync and syncrhonise files ok. Slightly slow but this I expect with what is basically a glorified serial port!
The only slight niggle I have now is that ActiveSync always reverts back to COM1 as the default port when I reboot my machine. Is there any way to stick it to com3?
it's blazing away at 700K/sec at least so the specs says

Please Help: Activesync again and wireless connection

I have my laptop connected to a router with a Linksys wireless connection. I use Ipass VPN to get through to my work e-mail.
When I install Activesync4.1 it stops me getting access in Ipass. I have tried all options I can find in this forum but with no luck.
Activesync itself works fine when installed.
I have checked with somebody else at work who uses AS with a wired connection and it works. This isn't an option for me.
Try to change your network binding setting, move your Wireless Connect to the top
you can do this by Control Panel > Network Connections > Advance(from the file menu bar) > Advanced Setting.
Hope this helps
I actually have a very similar issue with my MDA. Basically my laptop's onboard Wireless B/G cannot connect to the router when the MDA is connected. I tried your suggestion and now the MDA won't connect. Seems like it's one or the other
Has anyone found a solution to this issue? This is the only issue that I have with my device. Whenever I connect it, I lose my wireless internet on my laptop. If I'm on a wired network at the office, I lose internet access but can still access the intranet. Any advice would be appreciated.
This has nothing to do with wireless. Its the ActiveSync 4.x network install that is not done properly if you have a vpn client running
I had this too
Solution:
Once connected via activesync open network connections
There is a new network connection there then for the WM5 device
Open properties ans de-select all listed items except TCP/IP.
Worked for me
Thanks for the response. I had found your suggestion previously on another board and tried it without success. I'm suspicious that the issue may be the Dell networking control software on my laptop getting confused. As soon as I connect my device, my wireless automatically turned off like it's found another network. I was hoping someone else who's had this problem has been able to solve it. I'd appreciate any other suggestions.
Thielsa same with me. unchecking all boxes didn't work and I'm using an IBM laptop.
Did find something on a microsoft newsgroup and it seems to be a known problem that hasn't been fixed yet.
Not having activesync is the only downer for my wizard though quite a big one doing system restores all the time
not done any testing on this but I use 4.1 and vpn in via wirless.
Try establishing your vpn connection first and then launch outlook. Then connect the device to the pc (via cable).
From memory it seems to be the outlook bit that gets around the problem for me.
I've pretty much narrowed things down to the wireless connection control on my dell laptop. I've been able to get things to work fine now on my wired connection. I looked at the log from my wireless controller, and when I attach the Pocketpc device it reads a wired connection and turns off the wireless. I think that this is specific to laptops (dell only?) that have automatic wireless controllers. Hopefully someone will find a solution to this as it's the only 'bug' I have left on my device.

VPN driving me mad!

Over the last year I have tried many times to set up my Windows Mobile devices to connect over VPN and then use RDP to manage my clients' sites. To date I have never managed to get it to work. My config is as follows :-
Within Start \ Settings \Connections \ Advanced \ Select Networks
Programs that automatically connect to the Internet use MY ISP
Programs that automatically connect to a private network "My Work Network"
a VPN is configured under "My work network" and the device can connect to this and using vxutil I can ping the server I wish to RDP to - 172.17.3.3
Supposedly the important bit is to add the exception under "Work URL exceptions", I have added 172.17.3.3 in here.
Once the VPN is established if I enter 172.17.3.3 within IE or Terminal Services CLient the VPN connection is still dropped.
If I enter this IP address without connecting the VPN first then the device will not connect the VPN automatically.
If I enter a non qualified domain name such as ids-vs then the VPN is connected but the name is never resolved.
Can anyone shed any light on this, if I could use a local lmhosts file on the device as with XP then I may be able to work around the above. It appears to me though as though the exceptions list is never processed. I did a hard reset last night just in case, but this has made no difference.
I cannot believe that the above can be so complex.
I am using a HTC Tytn and using t-Mobile in the UK.
Any help greatly appreciated since it is driving me totally mad!
I would love to figure that out.
I was trying to connect to my pc at home like this and suffered from all the same symptoms your having. In the end I gave up, mainly 'cause someone told me that I needed another type of data plan to have vpn (at the time I had the $29.99USD plan) in other words it might be your plan, or something to do with the proxies or something, I hope someone would find out what you need to do in order to get this to work.
It's strange, looking around the web there are loads of people that struggle with the setup, but most seem happy once they are told to add the server name or IP address in the exceptions list.
I have ruled out the data plan since I can establish the VPN connection and can see it authenticate on the other end, as well as being able to ping the server on the work network from the phone.
I have just opened a support call with Microsoft as well, but I am not holding out much hope since I think they will point me at HTC. Assuming HTC ever responded they will just point me back at Microsoft!
Well it would be cool if they could help you, I tried everything myself and zilch. I could also establish a connection but as soon as I would try to access a file on my pc it would disconnect. I would try to help you out experimenting on my side again, but I changed my router to a cheap piece of $h.. and now I can't access my pc via vpn..... I really need to get a decent router
This may sound stupid, but I could swear someone told me something about the speed of the connection. If the connection speed is too low then DNS would fail, although that wouldn't explain why we are able to establish a connection, but not access anything else.
OK, I have made quite a bit of progress :-
1) I was using a cab file to configure T Mobile settings on the phone. This was somehow configuring the exceptions list to be ignored. Hard resetting the phone, installing this CAB the problem remained. Hard Resetting the phone and setting up GPRS manually - everything worked.
2) There is a fault with Windows CE 5 routing over VPN - the subnet information is ignored. Hence for example, if your GPRS provider give you a NAT 10.x.x.x ip address and your corporate network uses 10.x.x.x then you can never route to your corporate network.
And what cab file is that? do you know if it's on the extended roms for the t-mo roms? Glad to see your making progress, keep it up.
It was a Cab file for the Tmobile settings. It either came from these forums or over at modaco, can't remember which.
VPN
I was able to successfully use the Movian VPN to connect to my work using my XDA2.Worked fine for 2 years. Apologies, but I can't help with the settings and my work migrated to an M-notes server so I was able to connect without a VPN.

Connecting a Smartphone to a Mac via USB.

I have been searching for more than 3 hours for some kind of driver for my T-Mobile Dash, to use it as a GPRS/EDGE Modem. My iBook is an old G3 model, so even if I were willing to purchase Missing Sync (which I'm not, btw), my iBook is not supported, as it is not a G4 or better.
I am looking for a FREE driver for OS X 10.4 Tiger, specifically an "RNDIS" driver. I am not particularly looking for speculation. I believe I have the correct modem scripts, but I can't get my Mac to see the USB Modem. Yes, I have put my Dash into ICS mode. Yes, I am running Windows Mobile 6. Yes, I have all of the updates to OS X. Yes, I have tried searching the forums (this one, and several others). Yes, I have tried "Googling it", which produced much good information, but no solutions to my problem. Although my Dash is Bluetooth enabled, my iBook is not. Yes, I know I can add a USB Adapter. I may well do that in the near future. Right now, however, I'm just looking for an RNDIS USB driver for Mac OS X. I don't need Synchronization features, at the moment.
Anyone have any ideas??
Correction: Does anyone have any "good" ideas??
Thanks,
--Aaron
I just wanted to touch this and see if anyone had any information to help. My girlfriend has a new Pantech Duo and I would like to get USB tethering working for that. I did find a couple sites that may help (HowTo: USB Internet Sharing With Linux And Windows Mobile 6), but I don't know enough about the technology to feel comfortable trying it. Thanks.
I use my wizard as a modem sometimes just using Internet Sharing in my TNT Rom. You may be able to find a .cab for it. From there just use activesync/WMDC. I haven't tried it on activesync, only on WMDC.
he's using mac
download wmwifirouter by chainfire or the free trial of walkinghotspot (if your handset and mac have wifi), or a micro bluetooth dongle if not.
leoni1980 said:
download wmwifirouter by chainfire or the free trial of walkinghotspot (if your handset and mac have wifi), or a micro bluetooth dongle if not.
Click to expand...
Click to collapse
Pantech Duo doesn't have Wifi. That was my first attempt before I realized it didn't have it, because I'm using that solution with my Kaiser.
RE: bluetooth. I haven't had a lot of success with a reliable connection. I've tried with my Kaiser and successfully configured it, using it to connect three or four times from my house, but as soon as I went on the road, I couldn't get it to connect at all, using the same steps as before. I'm sure that's either karma or equipment smarter then operator, but I'm hoping for a USB solution for simplicity (theoretically) as well as the better data throughput.
SyncMate
Well, if you are using a Mac then here is what i used to do before I got Missing Sync.
For Syncing contacts and dates and such i used Eltima Softwares SyncMate. Runs pretty good and can be done using the USB cable. It also provides the option to do it over Wifi, which is faster. The Full version allows your to Sync even more stuff I believe.
For Syncing files, I simply paired my phone with my mac and transfered the mp3's, jpg's, etc.
Hope this helps,
Paul
Welcome to the hell which is created when you have a Mac and a WM device!
I have been mucking around with trying to get my internet connection shared with my MacBook pro for a couple of months. Here is what I have tried
- Bluetooth PAN - There is an issue with the MacBook Pro whereby the bluetooth PAN will produce incredibly bad latency issues rendering it useless
- Modem Scripts (Bluetooth)- Have never found one which would connect....I have tried a few
- Mobile Stream (USB) - Never managed to get a connection. The support team said that they had never seen the issues I sent in logs. They will investigate and hopefully resolve in future releases.
-PDAnet (Bluetooth)- It actually works! although it seems to hang the dialer process on the Mac periodically which requires a reboot to resolve
-Wifirouter - It works although it caused issues with access points in the office and drained the battery very quickly.....even when powered from the MAC it would empty the battery. Worked OK when using a mains charger.
-VMware Fusion to XP desktop (USB) - Works and works well however you can't provide (well i havent got it working) an internet connection to the Host Mac.
At the moment I am using the PDAnet 'solution' but I am always looking for something more reliable. A usb connection would be better and more reliable as there seems to be big issues on the Mac bluetooth environment.
Cheers
Aidan
Hell, I couldn't even find an RNDIS driver for windows (apart from installing ActiveSync) which is why I made the Linux post.
Yeah, OSX is *nix based, but I don't think you can use Linux packages on it, what I know about macs could be written on the back of a postage stamp though.
Regarding the VMWare solution, did you try enabling internet sharing for WinXP in the VMWare session (using a different IP to the one the Mac uses) and set the default gateway of the Mac to the IP of the XP machine in VMWare?
What I mean here is that the PPC shares the connection to the VMWare windows machine via USB and the VMWare windows shares the connection to the Mac via TCP/IP.
To be honest I never really played about with sharing the virtual machine with OSX too much. I was a bit put off with running fusion like that all the time as it sucks the life out of the battery when out and about.
Until a better solution is available I will stick with PDAnet. It does put me off windows mobile (slightly) moving forward. It would be interesting to see if the Bluetooth PAN connection works correctly without the latency issue on the diamond when it is available. If it worked properly it would be the best solution.
Cheers
Aidan
Read http://forum.xda-developers.com/showthread.php?p=2398248 for a review & comparison of WalkingHotSpot
With VMWare Fusion, setup VPN connection for the OS X host to connect through guest
evilc said:
Hell, I couldn't even find an RNDIS driver for windows (apart from installing ActiveSync) which is why I made the Linux post.
Yeah, OSX is *nix based, but I don't think you can use Linux packages on it, what I know about macs could be written on the back of a postage stamp though.
Regarding the VMWare solution, did you try enabling internet sharing for WinXP in the VMWare session (using a different IP to the one the Mac uses) and set the default gateway of the Mac to the IP of the XP machine in VMWare?
What I mean here is that the PPC shares the connection to the VMWare windows machine via USB and the VMWare windows shares the connection to the Mac via TCP/IP.
Click to expand...
Click to collapse
I was reading this thread and you gave me the idea which led me to a workable solution so I thought I'd share back. I'm in the same boat as many ppl with latest MBP which doesn't work well with BT PAN (slooooowwwww). I sort of needed Fusion anyway since I'm starting to write WPF apps and performance is terrible over RDP from OSX (different subject). Anyway, here are some keys to getting this to work:
1. Setup a private network (not bridged or nat)
2. Install activesync on guest and fire up 'Internet Sharing' from WM6 device and connect device to Mac with USB cable.
-at this point you should be able to get online from the guest OS through the mobile device as previous post indicates-
Here is where the fun starts:
3. Create an advanced network connection on the guest (accept incoming connections, aka VPN connection)
4. *IMPORTANT* Go to the TCP/IP settings for the advanced network connection and setup a range of IP addresses in the same subnet as the active interface attached to the WM6 device (run ipconfig to determine). Make sure that 'clients can request their own IP address' is unchecked. Make sure this range falls outside of the IP address assigned to the guest interface from the WM6 device.
5. On the host Mac, create a new VPN connection (PPP) and set the host to the private IP address assigned to the guest (again, you can determine that through running ipconfig on the client). *IMPORTANT* Go to the advanced settings for the VPN connection on the Mac and set the DNS to point to the IP address of the router of the guest WM6 device interface.
6. Connect to the VPN from the Mac host and you should be off and running.
It works flawlessly with very good speed (relatively speaking) over the 3g connection. To get online in a pinch, now I just need to fire up the guest (which takes just a couple of seconds from a saved state), connect my device via usb with internet sharing started, and then connect to the vpn from the Mac.

Categories

Resources