Hello,
Ever since I updated my T-Mobile XDA to the 2003 Rom, my active sync will not recognize the device while hooked up to my PC via USB. I saw someone posted a similar problem, but solved it by disabling their computers firewall. I have tried this and still no luck.
Can anyone offer any further assistance for me?
Thanks
Same problem here, but with kitchen 4.00.11 ROM (without T-Mobile customisation). Have no problem at work, cannot get it to work at home.....
Phil
Did you try upgrading activesync to 3.7 or doing a complete re-install of activesync?
Be sure to run the latest version of Activesync. (right now:3.7)
I had the exact same problem before I did...
Regards, Tore
stink and cpu time
is it just me or does active stink really eat up cpu cycles?
both my core and surface go through the roof when its sync'd but fine when its just connected..... when you stop syncronization or pull out the xda... the temps go back down to 33*c and 34*c respectively.... takes up 80+ % of time....
am I the only one with problems like that or have Microsoft just proved they dont have a clue about technology?
running v3.7
sync problems
I have the same issues on mine - can't sync via usb - tried three computers no workie - but ipaq syncs ok
reinstall active sync doesn't work
I can sync via IR w/no problems though
Please note MS stipulate that ActiveSync 3.7 is required for PPC2003 Xda II.
Serial and Infrared work fine with 3.6, but not USB.
jangtango said:
Hello,
Ever since I updated my T-Mobile XDA to the 2003 Rom, my active sync will not recognize the device while hooked up to my PC via USB.
Click to expand...
Click to collapse
Which ROM version are you running 4.00.10 or 4.00.16?
4.00.16
Just Reset Your PDA then connect your usb again
(Work with my xda 4.00.05 & ActiveSync 3.7.1)
Hi and HEEEELLLLPPPPPP!!!!
Has anyone managed to connect the Mda Compact to a G4 Powerbook via bluetooth to access the internet on GPRS account??
I cant get the Apple to create a bluetooth dial up connection with the mda.....
Will a change in stack be useful eg bluesoleil / toshiba???
Are there any modem scripts for the mac??
Has anyone achieved this via PocketMac??
I am trying to connect a G4 Powerbook with Tiger to a unlocked UK T-Mobile MDA Compact runnung Qtec 1.12 English rom with big storage hack on UK Orange.
:shock:
sorry always wanted to use one of those emoticons.... :wink:
Any help would be greatly appreciated.....
Riz,
Have been trying the same with both QTEK 2020 (forgot HTC name) and S100 (Magician) both on panther & tiger. Haven't gotten past the Bluetooth issue. In terms of GPRS scripts http://www.taniwha.org.uk/ has some, but not for our favourite devices. Am desparate to get same sorted. Do believe HTC's Bluetooth implementation ha something to do with it. remember on my 2020, I did run a Bluetooth utility to increase BT functionality, but to no avail....
Sorry not to have been of more help
Phil
Welcome Mr. Apple ;-) I am also running on "the only real system". We have to wait for http://www.markspace.com/missingsync_windowsmobile.html Will not take longer than 2-3 month any more.
Thankyou guys for your responses desperate (sometimes girlie like) cry for help. In my quest I have found that there are many like us stuck in the void between ppc and osx.
I even tried creating a connection using virtual pc !! Desperate times etc .....I can’t wait to try this Missing Sync ..sounds too good to be real so I have Emailed the company with our queries.
Have any of you guys tried it yet ???
Thanks again
sorry should read "to my "desperate girlie like etc
will poof read next time
sorry should read "to my "desperate girlie like etc
will poof read next time
Actually the mark/space site says The Missing Sync for Windows Mobile will be available before the end of June, not 2 or 3 months.
So any day now.
BUT, I have read in another thread here that both mark/space and pocketmac programs promise a whole lot more than they actually deliver, and are buggy.
Are there no other alternatives?
i think that the panther version is available now for the MDA Qtec s100 etc and the tiger version will be in the form of a free update??
it will retail for 39.99usd...could be a costly experiment??
has anyone tried any of these products in the past???
please could you point out the thread where you saw the negative reports on pocketmac and missing sync
thanks
Yes, long time ago I used Missing Sync for Palm Clié. It was stable, simple and great. Im quite sure, the new version for my MDAc will be similar. Thats the reason why I already deleted PocketMAC from my Powerbook and don't sync anything till MarkSpace software is available.
If you have an old version from Missing Sync, equal if Palm, PPC or whatever, you can updrade for just 19 $
By the way, not very actual, but helpfull:http://www.markspace.com/support/remove_pocketmac.html But you also have to check everything manually and yourself, cause with Tiger there are new and more files less.
Hi Mr Macmax,
My knowledge of palm based systems is not to good. Please could you tell me ......
Did you sucsessfuly use the missing sync to connect the clie via bluetooth to your powerbook?
Did the clie allow you to use it as a modem to connect the powerbook to the net??
This is what i want to achieve with my MDAc and powerbook via a bluetooth connection. I am hoping to use the MDAc as a bluetooth GPRS modem for my powerbook.
I was wondering if the missing sync program would bridge that particular gap??
Thanks
Hi riz,
well it is a very long time ago I used Missing Sync for Palm, so I can't really remember what was possible and what not.
But it's important to know that we have 2 possebilities to sync our Baby on a MAC: MissingSync or PocketMAC. Last one is a, sorry, pain in the ass, so rests MissingSync.
If it will work like you described, well, als them. But I'm quiete sure it will work cause it already worked with PocketMAC. Otherwise it can be a problem regarding to the right phone driver. May have a look here for modem scripts: http://www.taniwha.org.uk/
Thanks for your advise Mr Macmax but i have already been down the script path trying generic and ipaq scripts in the hope to fool the G4...but its just too smart...
I am tempted to buy the panther version of missing sync that is available now.... i think?? set up panther on the powerbook and give it a go??
still....could be a costly experiment
BLUETOOTH TO BLUETOOTH.....WHATS THE BIG DEAL!!!! ....one of the teeth needs a filling!! is there a doctor in the house!!!!!
sorry....this is really starting to bug me.... :twisted:
hello again ....
Has anyone managed to create a Gprs connection with the MDAc and Mac via a SD Wifi card so the phone modem is used to connect the Mac to the net?
Also.....
Anyone have experience with GSG script creater ?? Could it be used to make a bluetooth Gprs script for the MDAc so the Mac recognizes the bluetooth modem???
http://www.macronsoft.com/pages/en/gsg.html
anyone ??
Did you use an AT String. This is neccessary for windows. Look for the AT String needed for your provider and paste it into the properties of your bluetooth modem. At least, this is the way it works with windows.
I have managed to get it working with XP. I am trying to get it working with a Mac G4 Powerbook
..thanks for trying though....
The thing is, it shouldn't depend on the Os. The SSA service is standardized, your stack will be the same as for windows I guess (Widcomm, isn't it?). The only thing you need to set is the AT string, the rest should be done by the profile itself (i.e. giving you a dialog where to enter the connection settings).
The problem is that the i can not get the Mac to recognise the MDAc as a modem... so i fall at hurdle one..
..and i am not to sure where i would enter the init string ??
The Missing Sync for Windows Mobile is out now . but . i emailed them with this issue and they kindly informed me that this software will not allow the mdac to be used as a bluetooth gprs modem.
its been a while but has anyone cracked this little nut yet ?
ross from
www.taniwha.org.uk/
has been trying to help me on this but my knowledge of the mac is far from expert
is there any way to connect the two devices ie usb , wifi etc ?
as far as the g 4 is concerned the jam is modemless ?
The Missing Sync for Windows Mobile is out now . but . i emailed them with this issue and they kindly informed me that this software will not allow the mdac to be used as a bluetooth gprs modem.
its been a while but has anyone cracked this little nut yet ?
ross from
www.taniwha.org.uk/
has been trying to help me on this but my knowledge of the mac is far from expert
is there any way to connect the two devices ie usb , wifi etc ?
as far as the g 4 is concerned the jam is modemless ?
The Missing Sync for Windows Mobile is out now . but . i emailed them with this issue and they kindly informed me that this software will not allow the mdac to be used as a bluetooth gprs modem.
its been a while but has anyone cracked this little nut yet ?
ross from
www.taniwha.org.uk/
has been trying to help me on this but my knowledge of the mac is far from expert
is there any way to connect the two devices ie usb , wifi etc ?
as far as the g 4 is concerned the jam is modemless ?
I’m running a Home office, I have 4 pc two of which I’m running win98 OS and other two latest one is Win 2003 server and another one Win vista. When I try to make a Network connection its showing error. I just want to know should I upgrade my two pc to win xp or win2003 the error is incompatibility. Is that the only solution for this, any suggestions! Plz help. Thanks in advance
Ok.
First - you are in the wrong forum. We deal with Pocket PC and Smartphone devices, not PCs.
Second, there is no way of solving your problem unless you specify exactly what your error is, and how your network is built (do you have a router, if so what kind, how are you connecting all the machines etc.)
Hey Fellows,
I have a question.
Is there a way to get the Xperia working with ActiveSync 3.8 instead od 4.5?
The reason why I want to do that is, that the 3.8 does allow wifi and LAN Connections from the Mobile to the Desktop.
I installed the ActiveSync 3.8 but after connecting the Phone I get the message, that the Xperia needs ActiveSync 4.5 or higher in order to Sync .
Now, is there a workaround to get the holw thing to work?
Would be nice, if one has an idea.
Btw.: Here is a link to the 3.8 Version. If somebody wants to try. http://www.hpcfactor.com/support/syncsoft/activesync/#Download
Cheers
Jens
all wm6.0 (i think even 5) devices require activesync 4.5,
they only way is for someone to hack as3.8 to support wm6.
Hi there everyone. I'm having some problems synchronizing my TD2 that I would really appretiate some help with.
I'm using a pretty vanilla TD2, retail with no significant changes. I was synchronizing it with Outlook 2003 on my previous PC with no problems what so ever. Now, i've moved across to Windows 7 (64bit Enterprise) and Office 2007, and I cannot for the life of me get it working.
I've tried a number of things, including changing over the "Enable faster data synchronizing" option under USB to PC connections, upgrading to the new WM6.5 rom, and even connecting via bluetooth - all in vain.
Does anyone have any idea as to whats going wrong, and how I can go about correcting it?
Thanks in advance for any help with this issue.
Make sure you have Windows Mobile Device Centre 6.1 installed as Active sync won't work with 7.
WMD Centre
Hi
I have Windows 7 64 bit and mine works better than Vista.
Go to this link:
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
Download appropriate version (32bit or 64 bit). Install it. Then plug in your TD2. Make sure you see some sort of notification on your phone and your PC that it has picked up the device. Wait for any configuration to occur.
Go to Windows Update and check if you need to install any HTC Usb device driver. If so install that too.
Restart once all installed. Plug in your TD2 into computer and activate Windows Mobile Device Centre and follow the prompts.
Oh and open activesync on your TD2 and check you haven't more than the 2 partnerships otherwise this causes problems too.
Cheers
Aussie