Hi,
I am using O2 Atom with WM5. The strange thing is Phone App does not allow to use speaker. Is there any setting I need to do? I saw one option from the menu "Turn Hands-free on" but it's disabled.
Thanks,
hi
yes quite simply really keep the green glowing phone button pressed down while in conversation utill the speaker phone comes on,to cut it long press the same button,yes I know the turn speaker on button option does not work dont know why!!
cheers
Hi all,
I have decided to uninstall S2U2 and I don't want any other locking applications. However, is there is a way I can have the standard device lock activated with a short press of the power button?
Currently I am having to hold the 'End call' button until it locks, then turn the screen off with the power button.
Thanks
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
If you push the hang off button for more than 10seconds, it will be locked
No...
FetchBLN said:
If you push the hang off button for more than 10seconds, it will be locked
Click to expand...
Click to collapse
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Good tip: works for me!
By the way: you can configure what happens when you pres the "disconnect" button too.
Guys
Thanks for this thread. I am very confused when it comes to locking the phone. Can anyone tell me...
Does the built in device lock work well? Will it keep the phone locked when a call comes in ?
If so, then why do people use S2U2 or other third party apps? Also some people say that S2U2 drains the battery. Is this true? How does it drain the battery?
The HD tweak had the disadvantage that when the screen turns in 'shaded' state the device is also locked.
Then when unlocking the device the screen stays 'shaded'.
avimak said:
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
Click to expand...
Click to collapse
Maybe it takes you 10 seconds to count to 3.
I've finally got there with locking my HD... I had a S710 before the HD, and I liked the fact that on that I could hold down the "end call" button, and that it would lock the phone and turn the backlight off. The screen would then turn off completely after whatever time I had entered (2 mins I think). And on unlocking the device the backlight would turn on.
On my HD I have now disabled the device password, but enabled my PIN request, so that it secures the phone if it has been turned off completely. This means that I can now hold down the "end call" button for 3 seconds or so and it locks the device (requiring a 2-tap process to unlock, like the S710). I have also used the standard windows mobile settings (power) to have the backlight automatically turnoff after 30 seconds, and have used HD Tweak (setting 4.1) to autolock the device when the backlight turnsoff. The only problem is that when AutoLock happens using HDTweak, when I unlock it the backlight fails to turn back on, even once I have started using the screen. Any ideas on how to fix this?
Dave
chaosdefinesorder said:
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Click to expand...
Click to collapse
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
james00000007 said:
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
Click to expand...
Click to collapse
Hi,
Is this similar to an application my friend had on his iphone. Basically, when he needs to use the phone, he needs to put in a pin to unlock. I think the Nokia E61 has a similar feature.
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
Can u let us know how to u set it?
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
i hav a qns, at the locked screen, when u rotate ur device, does the screen rotate as well???
i had tis problem whn using gyrator to lock, whn its lock at home screen, the screen wil rotate if i rotate my device. how to disable that???
davehodgkinson said:
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
Click to expand...
Click to collapse
Mhh, I also think it's very annoying. I first used the auto lock feature by setting
HKey_CURRENT_USER/ControlPanel/BackLight/AutoDeviceLockEnable = 1, but I also have the backlight-issue, which is really annoying.
I also installed S2U2, but after installing that program the battery-life was inacceptable. By now I'm using the manual method, pressing hang-up for 3 seconds. It works, but I often forget it, and it then happens easily that I press the hard-button which awakes the phone from standby and I make pocket-calls.
The auto-lock feature is also exactly the thing I need, except the fact that I get the backlight issue then. Does anybody know how to fix the backlight issue? Maybe by editing another key in the registry?
Regards,
Tobi
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
stm2008 said:
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
Click to expand...
Click to collapse
which application are you using now to turn off the screen? sounds interesting.
Tyrion84 said:
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
Click to expand...
Click to collapse
Yes, but when I activate standby and put the phone into my pocket, I often accidently hit the button again, which reactivates the phone. hit_one_button_to_unlock ist not tobi-proof
I'm having this problem ... when I'm in call and hold HD with my shoulder, screen does not turn off to prevent accidental button presses.
And they DO happen. Many times I put other party "on hold" or even disconnect.
How do I fix it ? Does it have something to do with Lumos running ?
Please, help
install HD Tweak or Advance Config Tool and change the light sensor to enable.
I have HD Tweak installed 0.5.4
Since I'm using Lumos, I heared that I have to disable auto light control.
Is that the thing ?
Can I use Lumos and still have screen turned off during call ?
Is there a way or even a program to automatically lock the keypad once a call is connect, without me having to do it each time?
I would like to know this as well. Anyone who could help out?
Yes yes yes !!! I need also .... I'd already stopped about 10 calls trying to lock the screen or when in my jeans ... any solution ?? I need it !
+1 i was going to ask that question as well
I need that 2
yeah hate having to hold the phone 2cms away from my ear incase i drop the call.
RE:
You can try S2U2 - there are two options => "Blank screen on talk" and "Lock on talk". I prefer "Lock on talk" because of automatic activation backlight (proximity sensor) in case of removing the device from your ear...
Thank you goodbreak,
but I'm not so happy to install a different program to make a so "simple" operation that with my previous P3600 I realized simply pressing the on-off button ...
Still searching for an alternative solution ...
I know of a Program that does exactly what you guys are asking for... But i havent tried it myself....Let me know if it works for you
Here you go
http://forum.xda-developers.com/showthread.php?t=505032
&
http://thewingster.com/smartlock.aspx
Thanks also to you, bshakil.
But all this program make too operation not useful for this issue.
The solution should be very simple. Separate the off (hardware) button from End call button.
A simply solution should be to assign to a different hardware button the Off operation.
It should be possible ?
Thanks to all for any advice !
I totally understand it ... my previous phone was tytn2 and i miss seperate suspend button as well..
But with only 5 buttons available on the handset (excluding Volume) . i dont think we can assign a button for suspend only...
thanks! i m now using smartlock it work great