Database Users

disable answer/hangup buttons when screen is turned off

Is there a way to disable the answer/hangup buttons when the screen is turned off during a call? i keep accidentally hanging up on people

lol...okay
if you install a program called MortSaver it can turn off the screen and lock all buttons, except the button which de-activates it. you can activate mortscript by either assigning it to a hardware button or by simply launching the programs. if you wanna use it for your phone calls, i think you'd be more comfortable by assigning it to a hardware button. to me, i wouldn't give up one hardware button to mortsaver.

hopefully this will solve my automatic answer when taking the phone out of the holster to check whose calling...
thanks

thanks for the tip. ive read about this app in several threads, never thought to use it for this purpose.
thanks again

Accidential Answering

I use my 8525 in a side case and when the phone rings I usually pull out the phone to see who's calling to decide if i want to answer... though 9 out of 10 times i accidentally hit the answer button. I always lock my phone via device lock on today screen... is there a reg hack or setting which will allow me to disable or customize ALL the buttons (when in lock mode) on the 8525 so I don't accidentally answer. to me if i were to assign a button (ie power or ptt) to only be allowed to accept a call (when the phone is in lock mode) that'd be great. I'm tired of auto answering and what good does a device lock do if you can easily auto answer?

bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?

abricko said:
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
Click to expand...
Click to collapse
Sorry you're not getting replies and I have no solution of the type you are looking for sadly. I've tried to replicate what you say happens but it's not easy!!! My key is not that easily pressed and I always put the device back with screen towards my body - my fingers don't seem to get very close to the green button.
This is probably daft to suggest but have you checked the setting that lets you specify auto answer within X number of rings - just in case it's answering the call by itself!!. (apologies if you checked this setting already!!)
Mike

This may do what you want...
http://www.pocketmax.net/smf/index.php?PHPSESSID=da5459e6aadc9c38d5a74b0276782091&board=19.0

Auto Answer is not set... the problem is (and it's a problem with the phone design) when the phone is locked none of the buttons respond until you hit the power button and then unlock the phone via the screen (which is good).
However when there is an incoming call or reminder the screen turns on and then a few buttons are active on the phone (send, end and the two soft keys seem to be). So when a phone call comes in, if the phone is in your pocket or the hip case while reaching for the phone it's VERY easy to accidentally press any of the active buttons and then accidentally accept or reject that call.
I've searched everywhere I can think of and I find little mention of this problem and no mention of a fix, most screen lock replacements only do as much locking as the WM5 built in lock does. The button re-activation after an incoming call is probably something built into the hardware. That's all I can deduce from this.
Thanks for the responses I've received so far.

I am on my fourth PDA phone and have used both Win Mobile 2003 and WM5. They all behaved this way and it is one of my biggest complaints with the Windows OS. I have seen apps for Palm that solve the problem. How hard could it be to have the option to only wake with the press of the power button?!

not hard at all, but the again its M$, i am surprised these devices to have ctrl-alt-del keys.

Locking / S2U2 / Stand by questions

Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?

Doesn't pressing the "End call" button for 2-3 seconds also lock the phone?
Regards!

I do understand what you're saying. I figured out something really basic just the other day, that is if your phone is locked or in sleep mode just pull out your stylus and it'll unlock and wake up.
Just 1 movement.
Sorry if this is really common knowledge and you already know this but sometimes we overlook the more basic functions on such a complex device!!
Cheers
DB

Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.

jon- said:
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
Click to expand...
Click to collapse
Yep i do this too.
Press the power button mate, and it will lock the phone
I like how the phone unlocks when you take the stylus out but i didnt like how it locks the phone when you put the stylus back in, so i removed that function using the options in gyrator

I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.

is there a registry option for disabling the unlock when the stylus is removed/falls out ????

matou25 said:
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
Click to expand...
Click to collapse
why my HD no "Phone Canvas"?

Jezwick said:
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
Click to expand...
Click to collapse
I searched a long time for this, but I didn´t find a solution

Standby locking
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.

surfaczer said:
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
Click to expand...
Click to collapse
Have you tried HDTweak?

ScarySquirrel said:
Have you tried HDTweak?
Click to expand...
Click to collapse
Please explain

device lock
gt112 said:
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Click to expand...
Click to collapse
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon

JPW said:
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
Click to expand...
Click to collapse
You're Irish too, I presume?
The other option is you attached a very small cab.

OOOPS forgot cab
have edited post now
Jon

Should the device lock when I put the stylus in? I get the impression from this thread that it should but mine doesn't?

Call Pickup: Call pickup while phone is in my pocket. How to prevent?

hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers

This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.

mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again

Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot

I use Pocket Shield - it's not free (free to try though) but it's worked well for me

tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.

thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again

You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.

I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.

Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone

CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.

has anyone tried Lockmelite?
It may help - haven't used it myself though.

x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.

Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR

Pocket Shield doing perfect job for me

I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.

How to lock all buttons exept power button

how to lock all buttons exept the power button in wm6.5 ?
In wm6.1 it was possible to change that in settings/keys menu. But in wm6.5 this is gone for some stupid reason!
I dont want to use ext. app like pocketshield for such a basic and simple feature.
Reason: when phone is screenlocked - any hardwarekey wake up phone from standby. And of course the screen pops up and drain battery. HD2 keys are recessed and in the pocked can easyly accidentialy get pressed. When screen weaks up for some reasons (incoming call or other notification event) the buttons are not locked and i dont need to describe what funny things can happen then (just imagine on your own). Even accidentialy changes to my settings happened in my pocket without recognising.
HTC: this is ridiculous.
Pls help. Is there maybe a easy reghack to activate this basic feature again, like it was implemented in previous Rom versions?

the button lock in WM6.5 is the same as WM6.1 (got X1 before)
but in HD2 it's different.. and I don't think anyone solved this problem yet...

No known solution indeed, apart from using S2U2, and if you want to save more battery adding proximitylock.

what if you locked the keys while you are making a call with bluetooth and you want to look in your phone? You'd have to press the "end call/power" button..
Also since the power button turns the screen off, I automaticly press the same button to turn the screen on when I'm not making a call.. I can't count the times I've ended a call by accident like this.. another great design flaw of this phone

I still hope someone will find a solution for a working hardwarebuttonlock

no one found a solution yet?
i'm having the same problem and strangely i am irritating myself to death on this,
Not a good job HTC!