I'm having this problem ... when I'm in call and hold HD with my shoulder, screen does not turn off to prevent accidental button presses.
And they DO happen. Many times I put other party "on hold" or even disconnect.
How do I fix it ? Does it have something to do with Lumos running ?
Please, help
install HD Tweak or Advance Config Tool and change the light sensor to enable.
I have HD Tweak installed 0.5.4
Since I'm using Lumos, I heared that I have to disable auto light control.
Is that the thing ?
Can I use Lumos and still have screen turned off during call ?
Related
HI..
As you now HD screen lock during a call, witch is fine for me. NO problem works great.
Also, some times when you iniciate a call (outgoing) and move the phone to the ear it also locks and put the backlight off. I say sometimes because depens on the ambient light and you know the HD light sensor is not very good
Any registry or aplication for making this always "lock and turn off backligh" when I iniciate a call (outgoing, just in the moment that I place the call)
There is and aplication that do this, check here
http://www.palmarysoft.com/products.php?platform_id=2&category_id=1&product_id=1
but it does not work on HD..
Thanks!
Hello,
When the light captor detect that you are calling, the screen is turning off.
Why it isn't turning on when you end the call ?
Is it possible to custurmize it ?
thanxxx
oioioioioioi said:
Hello,
When the light captor detect that you are calling, the screen is turning off.
Why it isn't turning on when you end the call ?
Is it possible to custurmize it ?
thanxxx
Click to expand...
Click to collapse
You can use hd tweak or advanced configuration tool to set this up.
yes, but you can just activate or desactivate the option (phone option).
I activated it but the screen is not turning on when i end the conversation.
I have the same problem here. The screen goes off when receiving but I don´t get the screen on when I finish OR when I take the phone away from the ear.
I remember this problem before i install programs.
Is it the same for you ?
I don't think hard reset resolve this.
i ve this problem too. any help?
Same for me, and tweaking the HDTweak settings/AdvancedConfig settings didn't change anything.
Maybe because I tested in the evening on the street though...will report tomorrow when I get a call during daylight
UP
Pleeease !
Hi,
I had a problem with my Jade where the LCD screen blackout while making a call out, and i need to turn the screen on again pressing the power button.
Can anyone advise me?
Thank you in advance for your advise.
Vincent
No problem, is a normal function
Yup, that's normal behavior. There is a sensor which senses when you have the phone touching your face. It then turns the screen off. You wouldn't want it to activate all kinds of options while rubbing your face.
Thanks a lot! but Garmin problem now..
Hi ralfbonne, Arunia,
Thanks alot for your advise.
I have another problem which is the Garmin Mobile XT 5.00.10W.
Is a cracked version, after i installed S2U2 v1.60, the below error message pops up while half way using the Garmin GPS:
"Read access violation at data address 0xF9C3D650. Program address 0x0016FAF4 in background thread NULL (GfxFieldWindowProc)".
Is this caused by the settings for S2U2?
Besides, sometimes it took too long time to get the satellites signals, can be up to 20mins long!
Could you please kindly advise me too?
Thanks in advance.
Have a nice day.
Vincent
How to keep screen on in call (no blackout): solution
All registry hacks & Advanced Config tricks for keeping the screen on while a call is in progress do not apply to the Jade/3G.
However, there is a solution to overcome this annoying feature:
install Touch InCall Screen Tweak, and set the options "Ignore first screen off" and "Always On" in the options.
Why keep the screen on during call? Your face will just start activating things at random. If you really need it on (maybe using earpiece) you can always press the power button.
It's annoying
I have never accidently pressed anything on the screen while calling.
However, having to press the power button to bring the screen back while calling voicemail has annoyed me many times.
I also believe it is annoying that the screen blacks out. Even when I have the phone facing down and not to my ear, the screen blacks
I need to get it on, so I could use speakerphone. I'm one of those that love using speakerphone, so yea
I will try the InCall cab file.
when i am in a call and phone is not on my face i can not use the touch screen like press speaker, menu, mute ect. but if i do a soft reset on it then it works for a few min. then stops again. any fixes?
Have you lowered the touchscreen sensitivity either by registry tweaks, BsB Tweaks, HD Tweaks, etc.? If so, one of the known errors is that the active call screen will stop working and you have to use the hardware keys.
Did you happen to perform this tweak?
44. Prevent Accidental Link Activation When Scrolling
Do you scroll and find you accidentally click on something? This tweak is for you.
HKLM/System/GWE/Touch/Filter/Minimumtaptime
Change from 0 to 30
If you did, that's the problem, it breaks the phone app and makes all the buttons non-responsive while you are on a call.
Just change HKLM/System/GWE/Touch/Filter/Minimumtaptime back to 0 and the buttons will magically start working again.
Actually, the buttons do work, you just have to poke it "harder" and longer. I would touch and rub my finger over the end-key a couple-times and then it works. It's probably a result of the decreased sensitivity hack.
yes i did do that mod. but i changed it back and it seems to be ok now. thanks for the help
while we are on the subject does anyone know how to move the unlock slider to bottom and clock to top on today screen?
I thought it is a function of WM6.5 to disable touch-button during call to prevent accidently touching them with your face
if you want to use those button just slide along the length of that button and it will work just fine (work for me). And after you active any button by that way, all touch button will work as normal.
(sorry but english is not my native )
what is HD2' file of controlling Proximity sensor,Can u tell me the detail ?tks in abvance==
My English is very bad,Many do not understand
I also have problem...
Hello, I would also like to know the answer to this or if someone knows how to disable the proximity sensor
I have problem with the latest builds, currently I am using BOYPPC_SHIFTPDA Ginger.S. Almost everytime I start dialing the screen goes black and the phone locks. I can finish the call but the phone remains locked - black screen with the buttons light on.
I manage to wake it by calling myself from another phone and and sending busytone or by pluging in USB.
I managed to be able to wake the phone up with a program called Sanity. But I still cannot wake the phone during the call, for example to send DTMF tone.
This seems to be connected with the proximity sensor. When I check the status it isn't giving any values, or sometime gives some random values. I think it isn't broken because sometimes it works well.
I haven't had this problem with MIUI builds.
So probably removing the proximity sensor drivers would solve it
also have the same problem. Ending a call makes my phone keep its screen turned off... Until i find a lamp wehere i can holde the sensor under it so that it turns on the screen again.
I'd just like to have an option so that the screen doesn't turn off in a call. I mean it must be possible to deactivate the sensor...
Just press the middle button - the win flag button - and the screen goes on again.
not easy as that the phone doesn't react at all. Hardware keys lighten up but screen stays black. Looks funny when you search for a bright light source just to use your phone again after a phone call .