Hi! I have a Qtek 2020 with the 2003 SE, and it all worked well until one day i plug the PDA to one PC with the USB cable, and puff! The PC resets, my Qtek hard-resets, and suddenly when it turns on i notice the green LED is always ON! Like it was constantly plug to a pc/charging or activesync!!! It consumes the battery in 2/3 hours, and the backup power also! Even when i lose all power, when i put it charging it hard resets everytime! Can anything be done in this case? what can i do? PLEASE HELP!
Thanks!
Related
Hello knowledgeable guys out there, i had a major problem with my xdaII, the amber/green LED light just wont turn off, even when unplugged to the charger, im affraid that this can drain my battery, i tried hard-resseting and reflashing the rom, btw i use 2.06WWE rom and extended rom from Sin. Can anybody suggest a brighter idea?
21 views and still no reply?
Try to take off batery for few min.
Amber LED
I tell you pal.. just reflash your device and reload the OS once again, this might fix the bug..
Good luck... :?
i tried removing the battery and letting it drain off, but still the problem persist, its like its always on the charging mode even when you are not charging it, and its burning power more quickly, the battery dramatically goes down quick. Its original ROM was 1.66, then i encountered that problem, then i thought reflashing it with a newer version of ROM, 2.06 could fix the problem, but it still cant be fixed, any other bright ideas? or any of you guys out there had encountered this problem before?
Better bring it to your nearest service center. Its a mechanical problem.
Goodluck
ok, il try to bring it back to globe telecom, im sure its still under warranty. Thank you guys for your acknowledgement
I have a Qtek 2020i and recently I also have this problem, the amber led is always on even if it's not in charging mode, and the battery discharge very quickly, only one night! (I use 2400 mAh battery!).
If I do a soft reset and don't turn off the PDA, the amber led is not turned on, so looks like normal, but if I turn off and turn on again, the ambed led will turn on in 4s approximately.
I have this problem since the day I unplugged my 2020i from USB cable on PC (usb mode with CARD EXPORT) without desactivate usb connection on PC side.
I've tried everything but still not working, flash rom, activesync & usb mode, unscrew and open the pda completely...
Can anyone help?
I have an 02 XDA IIs on 2003 updated to most recent software for 2003 via o2 site etc
Ok so I took my PDA away for a few days over christmas and the batterry ran down, and I had forgot the charger so obviously it wouldnt turn on.
I got home and put it in the charger cradle, and it wanted to do a hard reset, so I went through with that and after a few seconds the screen goes black and it then goes ding and up comes hard reset again.
It does not hard reset at a certain point of setup as if you do the process quicker it will still hard reset say after, 10-20 seconds, usually the same every time I think.
Whilst off the cradle, you cannot even switch it on and no light shows or soft reset does not work.
In the cradle only the above which I described happens...
Any help is much appreciated
Sam England
hi.. seems to be a real trouble... anyway try to re-load the rom on it... use your wm2003 cdrom or dowload from p2p or forum wm2003 on your language, then try to flash the device following on screen infos...
hope this will help,
all the best,
storm
Have you checked your sync port?
Sounds to me like pins 20,21,22 may be damaged in your charger (sync) port, one may be touching the body of the port and causing a short, creating a hard reset. Also this might be the reason why it is not charging. IMHO regards
hi sam england
is your cradle plugged into the wall socket? usb does NOT provide enough energy for the device to 'survive' the reboot. i have this 'problem' almost every time i let i discharge to much.
so plug a good idea is to charge your device with the supplied separate charger.
hope it helps ....
regards ize|man
hardware button problam i think..............
i think that your both hardware buttons softrest and power swich are jam or lock thats why it doesn't work and because of them the phone get hardreset when ever you plugin charger or cradel
if you want any help about hardware of any htc products plz connect me on my e-mail id
if you have a cradle with the battery charger, take out your battery, charge it, and put it back in the unit
It should get through its start up routine
Hi All,
Got a problem with a Mini. The unit will not power on. It doesn't appear to charge either. When I remove the battery, and re-insert, I hear a "click" noise but nothing after that.
The LED does not light when power is connected.
It does not hard reset.
Any ideas?
Thanks
Sonny
Update
Ok, here's an update to the above post.
When the battery is inserted and the back cover is off, the LED on the top glows red. When the back cover is put on, the LED turns off.
The unit will not work from external power with or without the battery installed.
Does this help?
SF
Must be someone out there that can help?
got the same problem...
see if you can try another battery, mine does not power on without the battery in anymore. The back cover must be on before you can power it on and the red light means that it is charging but there is not enough charge to turn on.
same prob. here...
i am surfing on the net of my XDA when it shutdown i thought it was a battery problem so i try to charged it but i've noticed that it didn't opened for a couple of hours of charging. i tried to reset but it didn't work. so i decide to hard reset my phone but again it did'nt work, and now my XDA II mini WM 6.1 is totally dead.... i also tried to flash my phone but the activesync of my phone cant detect my PC, and even rebooting my phone also did'nt work.
i've also notice that everytime i charge and unplug the charger of my phone the redlight blink on the "led?"(correct me if i'm wrong) for a seconds...
Same here. My phone is dead when I'm trying to flash it. Now it's totally dead. Is there a way to fix this?
Hello! I've got the same problem, but somehow I did it a hard reset and my O2 just power up. I try to wake up my O2 without battery with USB charger/ with battery with USB charger/ without battery and back panel with charger/ with battery and back panel and somehow I do a hard reset. Best Regards
MoHuToP said:
Hello! I've got the same problem, but somehow I did it a hard reset and my O2 just power up. I try to wake up my O2 without battery with USB charger/ with battery with USB charger/ without battery and back panel with charger/ with battery and back panel and somehow I do a hard reset. Best Regards
Click to expand...
Click to collapse
you try a hard reset by pressing the camera button and soft reset power simultaneously
I have upgraded my Qtek 9100 with new Windows Mobile 6 WWE. After restarting the device everything worked OK, i just setted up basic things (clocks, owner information etc..) - nothing peremptory. After this I restarted it with soft reset again and it still worked... But then i shortly pressed power button (just to turn off the display) and after 10 minutes i wanted to turn it on again, but nothing happened.. The GSM LED diode still winked, but I couldnt turn the device on. So I used soft reset and again nothing happened, just GSM LED diode stopped winking. - Since this it was totaly bricked. I also tryed hard reset and bootloader mode, but none of this appered. The battery was 100% charged and I tryed to charge it again, but it didnt helped. I also tryed to take out and insert again the battery, but it still was unsuccessful What should I do now?
If the lights are still blinking then the phone still has life and appears to be operating (in some fashion). If you plug in the USB cable, does the charging light come on? If that does, then it is definetly still running.
I would suggest you taking the battery out and leaving it out for 5mins - 30mins. Then putting it back in and try turning it on. If nothing, try doing a hard reset after that. Also remove your SD card.
Good luck
Lights arent blinking at all. When I plug in the USB cable or charger, also no lights. I also tryed hard reset after plugging the battery, but again unsuccessful
Sorry, but its sure sounding like a bricked phone (although I've never heard of one that bricked sometime later. Usually its right after an upgrade).
Only other possibility is your battery has been completely drained. Can you get another battery to try in the phone? If not, then you can try jump starting the battery.
http://forum.xda-developers.com/show...38&postcount=9
Yes, I know that is bricked. What should I do to unbrick it?
Temporary brick at most if it was still running after the update. Try the different combos of battery out and in. This sounds like what a device does when the battery is bombed. If nothing, a new battery is definitely in order before you assign it permanent doorstop status. Good luck.
Hi,
a friend showed me his broken Magician (T-Mobile MDA Compact).
It did not turn on, no led, no nothing...
I plugged in my fully charged battery from my Charmer and connected it to my power supply, same thing.
I tried to enter boot loader (power, camera, reset pin), no reaction.
Any hope for this thing? Is there a sort of even "harder" reset?
Your phone may have 'bent' or broken battery terminas that aren't making contact.
Hi,
sorry I know this doesn't answer your question at all, but I was just wondering if you managed to get your Magician fixed in the end.
My daughter's SPV M500 recently stopped working, pretty much the same symptom, so I was wondering if you were successful in fixing it, and if so, how?
Thanks in advance!
Try this- open the back of the device, undo all the screws, open until you see the circuitboard. on one side (i can't remember which one) check the widest cable that connects to the circuitboard - undo the latch and pull it out, push it back in and close the latch, then try turning it on. that cable keeps coming out in mine.
The widest ribbon, is actually the LCD ribbon.
He would have still heard the introductory 'beep' if the unit was actually working (even if the LCD wasn't connected).
i got the same problem.....
i am surfing on the net of my XDA when it shutdown i thought it was a battery problem so i try to charged it but i've noticed that it didn't opened for a couple of hours of charging. i tried to reset but it didn't work. so i decide to hard reset my phone but again it did'nt work, and now my XDA II mini WM 6.1 is totally dead.... i also tried to flash my phone but the activesync of my phone cant detect my PC, and even rebooting my phone also did'nt work.
i've also noticed the redlight blink on the led for a seconds when i charged and unplug the charger...