O2 XDA Mini won't power on - JAM, MDA Compact, S100 General

Hi All,
Got a problem with a Mini. The unit will not power on. It doesn't appear to charge either. When I remove the battery, and re-insert, I hear a "click" noise but nothing after that.
The LED does not light when power is connected.
It does not hard reset.
Any ideas?
Thanks
Sonny

Update
Ok, here's an update to the above post.
When the battery is inserted and the back cover is off, the LED on the top glows red. When the back cover is put on, the LED turns off.
The unit will not work from external power with or without the battery installed.
Does this help?
SF

Must be someone out there that can help?

got the same problem...

see if you can try another battery, mine does not power on without the battery in anymore. The back cover must be on before you can power it on and the red light means that it is charging but there is not enough charge to turn on.

same prob. here...
i am surfing on the net of my XDA when it shutdown i thought it was a battery problem so i try to charged it but i've noticed that it didn't opened for a couple of hours of charging. i tried to reset but it didn't work. so i decide to hard reset my phone but again it did'nt work, and now my XDA II mini WM 6.1 is totally dead.... i also tried to flash my phone but the activesync of my phone cant detect my PC, and even rebooting my phone also did'nt work.
i've also notice that everytime i charge and unplug the charger of my phone the redlight blink on the "led?"(correct me if i'm wrong) for a seconds...

Same here. My phone is dead when I'm trying to flash it. Now it's totally dead. Is there a way to fix this?

Hello! I've got the same problem, but somehow I did it a hard reset and my O2 just power up. I try to wake up my O2 without battery with USB charger/ with battery with USB charger/ without battery and back panel with charger/ with battery and back panel and somehow I do a hard reset. Best Regards

MoHuToP said:
Hello! I've got the same problem, but somehow I did it a hard reset and my O2 just power up. I try to wake up my O2 without battery with USB charger/ with battery with USB charger/ without battery and back panel with charger/ with battery and back panel and somehow I do a hard reset. Best Regards
Click to expand...
Click to collapse
you try a hard reset by pressing the camera button and soft reset power simultaneously

Related

I-MATE JAMIN Dead

Hi, my device was low on battery and it went blank. Then I recharged it. After the recharge, the power button press started to soft reset the device and it got stuck at the blue windows mobile screen. After a few hard resets the device went totally blank. I took the battery out waited for a couple of hours, then put it on but no change in the situation. Now when I try to hard reset (camera+conn+soft reset) nothing happens. When I put connect it to the charger, nothing happens as well.
please help I am going mad in here.
camelking said:
Hi, my device was low on battery and it went blank. Then I recharged it. After the recharge, the power button press started to soft reset the device and it got stuck at the blue windows mobile screen. After a few hard resets the device went totally blank. I took the battery out waited for a couple of hours, then put it on but no change in the situation. Now when I try to hard reset (camera+conn+soft reset) nothing happens. When I put connect it to the charger, nothing happens as well.
please help I am going mad in here.
Click to expand...
Click to collapse
use original battery and original charger. be patient, just let it connected long time. (this in case your battery was fully discharged and you did not no use your device for long time)
i am read that it stucks with blue windows well it is window mobile so you not have really blue window, but i think you mean the splash screen.
maybe you have downgraded your device somehow? If so, upgrade it again and it will not stuck any more at the "blue window"
many thanks. my i-mate is plugged in for power now.. there are no lights showing up as well.. i am being patient.. lets see how it goes.
It sounds to me that you have a problem with the battery connectors or maybe the battery it self.
I once let my Jamin run down (when I accidentally left MP3's playing over night) and it refused to boot (stuck on the splash screen just like yours).
Fortunately for me, once I connected the power supply, the problem went away.
If you don't see the orange "charging" light check all connections, make sure the battery is installed properly and the contact surfaces on it are clean, make sure the power supply is plugged in tightly and the wall socket has power.
If nothing helps you'll probably need a new battery.
Many Thanks.. I will order a new battery and see if it works. Very unlucky situation to be left Jaminless on the beach during my summer holiday..

Qtek 9100 (HTC Wizard) bricked :((

I have upgraded my Qtek 9100 with new Windows Mobile 6 WWE. After restarting the device everything worked OK, i just setted up basic things (clocks, owner information etc..) - nothing peremptory. After this I restarted it with soft reset again and it still worked... But then i shortly pressed power button (just to turn off the display) and after 10 minutes i wanted to turn it on again, but nothing happened.. The GSM LED diode still winked, but I couldnt turn the device on. So I used soft reset and again nothing happened, just GSM LED diode stopped winking. - Since this it was totaly bricked. I also tryed hard reset and bootloader mode, but none of this appered. The battery was 100% charged and I tryed to charge it again, but it didnt helped. I also tryed to take out and insert again the battery, but it still was unsuccessful What should I do now?
If the lights are still blinking then the phone still has life and appears to be operating (in some fashion). If you plug in the USB cable, does the charging light come on? If that does, then it is definetly still running.
I would suggest you taking the battery out and leaving it out for 5mins - 30mins. Then putting it back in and try turning it on. If nothing, try doing a hard reset after that. Also remove your SD card.
Good luck
Lights arent blinking at all. When I plug in the USB cable or charger, also no lights. I also tryed hard reset after plugging the battery, but again unsuccessful
Sorry, but its sure sounding like a bricked phone (although I've never heard of one that bricked sometime later. Usually its right after an upgrade).
Only other possibility is your battery has been completely drained. Can you get another battery to try in the phone? If not, then you can try jump starting the battery.
http://forum.xda-developers.com/show...38&postcount=9
Yes, I know that is bricked. What should I do to unbrick it?
Temporary brick at most if it was still running after the update. Try the different combos of battery out and in. This sounds like what a device does when the battery is bombed. If nothing, a new battery is definitely in order before you assign it permanent doorstop status. Good luck.

[HELP] My atom went dead after losing the batterry for 2 days

Hi guys,
I really need help for this. My XDA ATOM (not the exec type) is currently dead when I forgot to charge the battery when I'am on trip to somewhere far from electricity.. I have tried to charge the battery over and over again but every time i push the "ON" button the screen just goes blank. The only thing happen when I push the "ON" button is that the lights in the "call" and "put call" buttons goes blipping. Nothing else.
I have tried soft reset, hard reset and take the battery out for a while and put it back. But nothing seems to work.
Any help or suggestion would be very much appreciated..
you have to charge with desktop charger.
Atom won't detect the present of battery, if battery voltage below 3V. So you can't charge when inside atom.
Put in in desktop charger, when charged put it back and recharge inside your atom.

My Uni doesn't boot.

Hello.
I have big problem with my Uni. It's not booting, it's not going to bootloader mode. When I connect Uni to computer the red LED blinks and nothing happen. Battery works in other uni.
hmm leave the uni on the charger with battery in.
also have you tried using another battery in the dead uni?
same problem
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
holy **** me too. i borked my sd slot so i took it apart, just popped off the back and fiddled with the sdpins and now it refuses to boot+redlight.
any thoughts? i miss my phone -_-
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
keyfetcher said:
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
Click to expand...
Click to collapse
did you try another battery in your uni? also did you try tapeing the pin on the battery that reads the voltage level?
according to the universal service manaul flowchart, a redlight indicated bad battery>bad battery pins>shot motherboard.
so i don't think this is good. anyone got any..thoughts on figuring out WHAT exactly happened?
Hi
thanks for the input
will you please guide how I can tape the pin on the battery that reads the voltage level
many thanks
help
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
keyfetcher said:
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
Click to expand...
Click to collapse
I beleive that BA_6.5.23004.WWE-xplode-R7.1 mean blue angel rom. http://forum.xda-developers.com/archive/index.php/t-482997.html
so you are pretty much out of luck unless you can jtag.
again the same problem
keyfetcher said:
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
Click to expand...
Click to collapse
...almost the same.
my problem occurred after I did a soft reset. It took it a while to boot and every other time I used soft reset the boot took longer and longer until it did not want to turn on again.
Soft reset doesn't work but when it's left on the charger and pressed, the battery light blinks once. It won't charge and my PC registers a device malfunction when connected through USB.
The only sign of life pops up when I press hard reset but after I press 0 or X nothing happens.
Please help!
I have same problem as well, I even bought spare battery but uni remains dead and silent.
Beside the fact that when it's connected to PC, windows show unrecognized usb device.
what happened before it died? did you ... do anything to it? mines still dead as a doornail.
I am not alone :'(
It means many other fellows are suffering from same.
strange , total silence from experienced guys... atleast they can say it is useless for you to try.. and now dig a grave for it.
Experienced guys have their own lives too
Wait with patience till someone replies you and do not double post on same topic please

Help please

Hi, hope someone can help. Baterry went dead whilst on a call, it was low. Tried to recharge through USB "device not recognised". Tried power and Orange LED comes on momentarily then phone cycles through booting. Sometimes you can see the boot screen other time just the vibration is felt. Tried soft reset hard reset every which way power on whilst connected, power off etc. Removed battery tried again, same. Left battery out for 30 minutes, same. It now appears to be stuck in bootloader screen and still cycling. How long does one have to leave the battery out? What else can I try???
Jerry rigged another destop charger so I could align the contacts and got some charge in the battery. Put it back in and charging normally, phone booted up as though nothing had happened. No hard reset evidence.

Categories

Resources