guys,help me.i have a wallaby.it can't charging even when i plug into cradle or not.and when i try to call it always going to speakerphone.anyone have idea what happen to my xda.... please help me.
Related
hi guys, i have been reading on upgrading to wm5 and thought i would give it a go, i put a file on my handset called getdevicedata, as soon as i run this on my handset my handset went to serial and now i can not reset it, i have tried hard reset and also taking battery out for a wile but the screen is stuck on serial??? please help guys, it is also showing not connected and will not connect with activesync when i put into the cradle.
ANY HELP OR INFO AT THIS TIME GREATLY APPRECIATED !!
Thanks
alan
i am realy struggling guys, i have been searching the forum for a couple of hours and cant find any advice on what to try to unbrick my handset, that is if it is bricked. if any one could drop a link t any helpfull info i would be very greatfull.
thanks
Is my blue angel bricked? i have serial at top and v2.07 at bottom, when i put into cradle i get usb, i have disabled the active sync and downloaded mtty.... am i on the right tracks for putting it right guys,i dont know how to use mtty, im geting stressed out now as i have searched the sight several times with no look.
Cheers
I tried to flash an original IPL/SPL to my device, it completed but not my elf wont even turn on.
Please can someone advise me. Thank you.
... oh, and by wont turn on, I mean its completely dead, push the power button and nothing at all happens.
my elf also won't turn on
there just comes the branded boot screen and then everything is dark.
just the orange light is "flashing" wenn a usb cable is connected.
any idea?
@dgcarter: (i never had such problem so i dunno i could be wrong but i think ur device most probably has hardware problems (battery, chip etc) so maybe you could try to use different battery or take it to a service center
@f-dusk: you can try to go to bootloader mode and re-flash ROM or if its bricked try to use unbricker methods. Please donot ask further questions here because most probably almost all of 'em may have been asked and solved. Refer to Guides FAQs in the sticky threads for more information!
@f-dusk: at least you have a light LOL! My phone was totally dead, like trashcan dead, haha.
@@rj*n: I know, its so weird that it would happen, perhaps the hardware is funky, was just coincidence that it failed when I was messing with it. But I just took it though to Lab88, I was surprised to find that I still have 3 months left on the warrenty. And it's so stuffed up that they wouldn't even be able to tell I had all sorts of funky cooked roms on it, lol.
Thanks all, now I just gotta wait for "the call" haha, but I hope they fix it quick, I'm gonna go mad if I have to use my Nokia 6230i for much longer.
glad to be of any help dude... anyways best wishes for your phone lol
Processor is dead...
God bless``
Hi Guys
Please could any on help me i have a orange spv m5000 i think i flashed wrong rom killed phone, but have managed to hard reset via, on button plus the two minus buttons and the soft reset hole, but when i press 0 to restore factory defaults i then see the text ( serial and v2.01 ) but phone will not start up, when i plug in usb cable the only thing that shows up in windows is (pocketpc smartphone) in the safely remove hardware on taskbar then i tryed uni_exitbootloader but get error (cannot open usb port) i have stopped activesync usb detection, but still no joy.
is there a way to get the usb port opened or is this phone bricked, Man i hope not i loved this phone and cant really afford to get another (Real hard times!) Man i hate learning the hard way.
I also read somewhere that the phones batterie memory can get curupted and there is a way to fix it by shorting out the pins if any one has that info that would be great as well.
a million thanks for any help any one could give I mean that folks.
if you think you can help would you be so kind as to send me an email telling me howto, [email protected]
again many thanks for any help
Regards
Daz
PS sorry if this is in wrong forum if it is could you tell me where its suppose to go cheers
Try doing Doc format and/or running MTTY
All information can be found on my signature link
Good luck,
Double post!
Thanks orb3000
ill try them out
and sorry about double post really unsure where it was suppose to go.
Thanks again for answering
PPC
Hi Again
tried mtty, says
com1 port can not open
even though i disconnected active sync and usb cable as recommended but still no joy,
i still have the faint serial and version displayed on screen but it seems as though theres no way of finding a connection to the phone,
i havent tried doc format still looking on how to do that but i remember reading about that and i think i will still have same issue as mtty has, weird that in my task bar i can see ppc smart phone in safely remove hardware and yet no prog can get to it.
got a feeling this is a lost cause, sending it in for repair costs the same as buying a secondhand one so whats the point of repair! crap man this sucks
Orb could you suggest a good working rom for my spvm5000 so i could try a differant rom to see if that might make a differance ill try any thing at the mo,
oh well thanks for trying dude.
regards PPC
I would recommend Tomal 8.2, 8.5 or 8.9
Let´s see if other member can give you more alternatives for your problem.
Hi guys,
I a noobie in all aspects of what you're doing here so i'll just share what I did with my 2 motorola phones.
I was able to open the phones with RSD(?) and use any sim cards with it.. one was working just fine (with shut down probs and auto factory resetting everytime that happens) and the other one practically in "coma" state... the 2nd phone can charge it's battery whenever i put it in a socket when i attempt to "turn it on", to no avail. please help me or at least explain me first what happened to my phone and what should i do...
you can email me at [email protected]... and please no jokes
PS: if im in a wrong thread or anything i've done wrong, please forgive me admins.
Hey y'all
So over a month now I got that annoying alert on my phone..
I've tried every solution there is on Google\YouTube\XDA
nothing worked. please, can someone tell me how can I force-cancel this MF for good?
I can charge the phone by cable only when it shut-down
*stock-rooted if it helps
Thanks