Oops! Anyone have the CABs contained in Extended Rom? - JAM, MDA Compact, S100 General

Oops! I installed Big Storage, but where I thought I'd backed up my cabs... I haven't. Anyone got the cabs for the Magician, or know how I can extract them from a rom file?
I've looked on the FTP, but I can't find any there.

Jed D`Lagged said:
Oops! I installed Big Storage, but where I thought I'd backed up my cabs... I haven't. Anyone got the cabs for the Magician, or know how I can extract them from a rom file?
I've looked on the FTP, but I can't find any there.
Click to expand...
Click to collapse
What about the folger \Magician\Extended_Roms ? There are lots of files/folders containing the original ExtRom Cabs for lots of devices.

Or if you got a romdump from your non-bs system; use bal666 tool to extract them. Might even work on an extracted shipped-rom. But first...visit the ftp! As psych0t1c suggests.
M

psych0t1c said:
What about the folger \Magician\Extended_Roms ? There are lots of files/folders containing the original ExtRom Cabs for lots of devices.
Click to expand...
Click to collapse
Oh, I didn't see the directories. Thanks for showing me that I'm blind! =D Oh, and thanks for the help too.

Related

How to flash Original o2 Rom without running branding

Hi,
I want to flash my XDA Orbit with WM6. o2 has the image on their page, but it first installs WM6 and then destroys many things when it tries to put everything to GPRS, so that users pay much money instead of using the built in WLAN.
I read something about flashing and then soft resetting, so that it cannot run the branding tool. The .cab files with the branding tools an Tomtom and some patches are lying then somewhere. Where?
Is this method good?
When do I have to soft-reset?
regards,
Stefan
SurfaceCleanerZ said:
When do I have to soft-reset?
Click to expand...
Click to collapse
Just as the unit starts the customisation, directly after the auto-setup routine.
HTH,
Hello,
thank you for the info. I found that out in the meantime, but where are the update files then? I`m unable to find them...
regards,
Stefan
SurfaceCleanerZ said:
Hello,
thank you for the info. I found that out in the meantime, but where are the update files then? I`m unable to find them...
regards,
Stefan
Click to expand...
Click to collapse
In extended ROM, if you want to take them out, it's possible to cook the same ROM and re-flash it without this part....
If you want to see this stuff, you'll need an application like Total Commander.
Hello,
thank you for the info!
Which version of Total Commander? And why Total Commander? To view cabs? This is possible with WinRar, too. But there are only the installer files and the complete RUU image. I tried TC but I got the same result as with winrar.
Or is the PDA version meant?
I want to use the original ROM from the o2 homepage, just without branding. I have no o2 SIM card, bought it from ebay. And I don't want to unlock it, because of warranty.
regards,
Stefan
Hi Stefan,
SurfaceCleanerZ said:
Hello,
thank you for the info!
Which version of Total Commander? And why Total Commander?
Click to expand...
Click to collapse
Total Commander allows you to look n the extended ROM on your device I presumed you wanted to clear files out that way.
SurfaceCleanerZ said:
To view cabs? This is possible with WinRar, too. But there are only the installer files and the complete RUU image.
Click to expand...
Click to collapse
You can look in the RUU image for the nbh file (using WinRAR), then break this apart to take out the ExtROM....
SurfaceCleanerZ said:
regards,
Stefan
Click to expand...
Click to collapse
Hope this helps - if not, then I've probably done what you're looking for already and could put it on the FTP site....one of the Mods will tell me if this is a no-no....
Hello again,
I extracted the .nbh file.
"for the nbh file (using WinRAR), then break this apart to take out the ExtROM.."
What to do with it? renaming to .zip or .rar doesn't result in winrar opening it...
It's the german ROM.
I want to flash it as meant and then stop soft-reset when branding wants to start (waiting 3s). And then install only the needed fixes (sd fix, cam fix etc.)
regards,
Stefan
regards,
Stefan
SurfaceCleanerZ said:
Hello again,
I extracted the .nbh file.
"for the nbh file (using WinRAR), then break this apart to take out the ExtROM.."
What to do with it? renaming to .zip or .rar doesn't result in winrar opening it...
Click to expand...
Click to collapse
Ah. I assumed you had some cooking tools...you need to run NBHExtract, take out the EXTRom, run Dark Simpson's HTC ROM Tool to re-constitute the ROM and then re-flash. Are you happy about all this, or did you want to stay 'official'?
SurfaceCleanerZ said:
It's the german ROM.
I want to flash it as meant and then stop soft-reset when branding wants to start (waiting 3s). And then install only the needed fixes (sd fix, cam fix etc.)
Click to expand...
Click to collapse
Do you have a link to the German ROM somewhere? I'll happily do all this and post the file somewhere for you to pick up.
Hi,
I don't want to brick it ;-) If I flash a cooked ROM, I have to cid unlock it before. Is this necessary? The premium Rom looks nice. A german version is not available, or did I miss it?
At xda-zone where they postet this, they wrote that somewhere then lying the .cab or .exe files which are executed then. Is it not posssible to extract them? And then install them manually?
On my request where they are no one answered...
I never cooked a rom or something like that, yet.
I can give you the link, but I think you are unable to get it, because there is a serial check before dl. But you can try.
If you have ICQ, I can send it.
http://member.htc.com/ruudownload/O2Wm6SnCheck.aspx
The cam fix (found it in a forum) leads into the cam working good and the new modes are nice but often there is a message that the cam cannot be initialized. Then soft-reset helps.
Do you have the radio fix? Is TMC possible with it? With Navigon?
regards,
Stefan
SurfaceCleanerZ said:
Hi,
I don't want to brick it ;-)
Click to expand...
Click to collapse
I've got the antidote to bricks... I'll test it first.
SurfaceCleanerZ said:
At xda-zone where they postet this, they wrote that somewhere then lying the .cab or .exe files which are executed then. Is it not posssible to extract them? And then install them manually?
Click to expand...
Click to collapse
Yup. That's exactly what I'll do for you.
SurfaceCleanerZ said:
On my request where they are no one answered...
I never cooked a rom or something like that, yet.
Click to expand...
Click to collapse
Well, I'm only a trainee chef, but I can break ROMs apart and put them back together easy, without playing with the content too much - that's all you need here.
SurfaceCleanerZ said:
I can give you the link, but I think you are unable to get it, because there is a serial check before dl. But you can try.
If you have ICQ, I can send it.
http://member.htc.com/ruudownload/O2Wm6SnCheck.aspx
regards,
Stefan
Click to expand...
Click to collapse
Yeah, I'm at work at present, probably couldn't get the file through the firewall... Could try emailing to me - if you PM I'll give my email address.

Im looking for the cabs to move e-mail, ringers, and cache on memcard

Im looking for the cabs to move e-mail, ringers, and cache on memcard
I know ive seeen the OEMs for this in the kitches but I havent and cant find the Cab files to do the edits. does anyone have them or know where I can get them
Me too......
Here u go..just made them
attachments moved to the next page
got them in OEM form as well?
YUP ..do u want me to post them
These attachments are also moved to the next page
ather90 said:
Here u go..just made them
Click to expand...
Click to collapse
Thank you!
The existing documents, with this editing, where are they put?
In the new folder or in the older?
it creates the folowing folders on your card
Cacheie
Ringtones
Documents
Attachments
Mail
i think the old documents arent automatically moved to the new directory..it will be effective for new docs,rt's,mail or attachments
make sure u softreset after installing
ather90 said:
it creates the folowing folders on your card
Cacheie
Ringtones
Documents
Attachments
Mail
i think the old documents arent automatically moved to the new directory..it will be effective for new docs,rt's,mail or attachments
make sure u softreset after installing
Click to expand...
Click to collapse
I think youve got too many / in the path. it doesnt seem to work for me.
it doesnt work. any help?
ok i varified that it is infact in the cab incorrectly.
its supposed to be /storage card/ringtones. you have //storeagecard//ringtones//
only need one can you or someoen tell me how to edit cabs?
remlle said:
ok i varified that it is infact in the cab incorrectly.
its supposed to be /storage card/ringtones. you have //storeagecard//ringtones//
only need one can you or someoen tell me how to edit cabs?
Click to expand...
Click to collapse
I have an ITALIAN device, so I think that I must edit all the cabs in my language?
How can I edit these files?
sorry guyz..its my fault..i will reupload them A.S.A.P
can u tell me whats the name of ur storage card in italian..i will make a seperate release for you
here is the correct version for both of the files attached in the previous post
Note : these are For ENglish ROMs Only
flaviopac said:
I have an ITALIAN device, so I think that I must edit all the cabs in my language ?
How can I edit these files?
Click to expand...
Click to collapse
is this how u spell these in Italian ?
Scheda di immagazzinaggio - Storage Card
Documenti - Documents
Collegamenti - Attachments
Posta - Mail
ather90 said:
is this how u spell these in Italian ?
Scheda di immagazzinaggio - Storage Card
Documenti - Documents
Collegamenti - Attachments
Posta - Mail
Click to expand...
Click to collapse
Scheda di memoria
Documenti
Allegati
Posta
Many many thanks!!!!
thanks...
ather90 said:
here is the correct version for both of the files attached in the previous post
Note : these are For ENglish ROMs Only
Click to expand...
Click to collapse
thanks for sharing...
Here are the Cab's in Italian Language..Do let me know if they work
hi there
ather90 said:
here is the correct version for both of the files attached in the previous post
Note : these are For ENglish ROMs Only
Click to expand...
Click to collapse
appreciate your work, but i don't any change after installation of ringtone,
thanks
what do u mean..i cant understand u :0
Just ran this on my TyTn II running AT&T's first image, tried installing on both the device and storage card but I do not see these new directories...
Any ideas?
Thanks,
Devan

iexplorer from wm6.1

there is internet explorer from wm 6.1 extract the zip to storage card install reg files then click iexplorer.exe
Thank you very much for share.
rickwyatt said:
there is internet explorer from wm 6.1 extract the zip to storage card install reg files then click iexplorer.exe
Click to expand...
Click to collapse
wow... That's great!!! Thanks...
can it be patch and replace on current PIE?
Anth
Anth said:
wow... That's great!!! Thanks...
can it be patch and replace on current PIE?
Anth
Click to expand...
Click to collapse
i dont no still testing it looks good
excellent! thanks very much
mugglesquop said:
excellent! thanks very much
Click to expand...
Click to collapse
IT Says:
"Version"="MSIE 6.0"
mine too.. and i have pocketIE+ installed as well. nothing new happens..
Nadavi said:
IT Says:
"Version"="MSIE 6.0"
Click to expand...
Click to collapse
thats what it says even on wm6.1 rom
Can all the files be copied to the Windows directory and replace/overwrite the existing files with out any ill effects?
trojan9x said:
Can all the files be copied to the Windows directory and replace/overwrite the existing files with out any ill effects?
Click to expand...
Click to collapse
i dont no but you could try but befor you do do a full backup
What are the advantages to the current version that I have comparied to this one?
iampedro said:
What are the advantages to the current version that I have comparied to this one?
Click to expand...
Click to collapse
Quick zoom mainly, but its not quick, its terribly slow, and scrolling is even more slow than PIE 6.0 with the scroll bug! at least on my rom anyways.
trojan9x said:
Can all the files be copied to the Windows directory and replace/overwrite the existing files with out any ill effects?
Click to expand...
Click to collapse
yeah i would also like to know if this is possible ?? anyone know ?
rickwyatt said:
there is internet explorer from wm 6.1 extract the zip to storage card install reg files then click iexplorer.exe
Click to expand...
Click to collapse
sorry for what is probably a stupid question here, but how do you install those registry files? do you have to go through and add all of the entries in the .rgu files by hand, or is there a simple way to just install the files?
Anyone have all the file of PocketIE of WM 6.0?
I've overwrite all the files of the PocketIE 6.1 on my Windows folder of my device and now I have a problem: I haven't signal and the telephone doesn't work.
found this at this site
i don't know which one, but i got this cab install and use your ie to open...it will have the zoom function if you press down in your ie with a stylus or finger to bring up the zoom...

EasyPortOven - Should I make it for every Device?

I made a very simple porting kitchen, it plugs right into Bepe's extended kitchen. It basically ports new SYS folders and XIP's into Herald/Atlas ROMs. Here.
My question is: Is it worth expanding this to every single device on the forum? It'd be very simple to do...
EDIT: Any porting cooks that wish to fix any mistakes I have made in the porting process, by all means, PM me.
I can help you for Prophet user's and cookers
Anything I can do let me know.
Do it!!! I can help for Prophet (sortof) although I clicked the wrong box
If I may add that will be a good idea count us in
OK, everyone. Just post a ZIP file with the following (and tell me what the phone you have, of course)
From your SYS folder:
the .VM folder
the WinCENLS_WWE folder
From your SYS/Shell folder
shell32.exe folder (it's a module.)
shellres.dll folder (it's a module.)
Poke. I need these files for all devices. So far, I only have the Herald's and the Wizard's.
Here the HTC Prophet files.
All in the files but "WINCE_WWE" folder is here "14335b48-529a-ff26-f903-321295f3874e" but same files in
here : http://forum.xda-developers.com/attachment.php?attachmentid=84960&stc=1&d=1210326576
ivanmmj said:
OK, everyone. Just post a ZIP file with the following (and tell me what the phone you have, of course)
From your SYS folder:
the .VM folder
the WinCENLS_WWE folder
From your SYS/Shell folder
shell32.exe folder (it's a module.)
shellres.dll folder (it's a module.)
Click to expand...
Click to collapse
hi ivanmmj.. great work u ve got going around here brother here are the files u mentioned from elfin sys folder.. hope this helps for u to include elfin too in this tool
ababrekar said:
hi ivanmmj.. great work u ve got going around here brother here are the files u mentioned from elfin sys folder.. hope this helps for u to include elfin too in this tool
Click to expand...
Click to collapse
Are these Elfin only? Or are they Elf compatible as well? (I'm not sure how much is shared between them.)
I also need the .VM folder in the SYS directory. You missed that one.
Here you go. Also sent you a PM with the file on my Mirror site.
Here's the Atom Exec hope it can be added
ivanmmj said:
Are these Elfin only? Or are they Elf compatible as well? (I'm not sure how much is shared between them.)
I also need the .VM folder in the SYS directory. You missed that one.
Click to expand...
Click to collapse
dont know about elf.. never been on that side of cooking.. and here's .vm folder.. missed it out in my sleep
hopefully u can extend the kitchen to xda zinc also ... here r the files u req
Keep up the good work
the files for hermes tytn
ivanmmj said:
http://forum.xda-developers.com/showthread.php?t=387303
Click to expand...
Click to collapse
hi ivanmmj.. you might wanna consider checking that link in your first post.. it points to http://here's a link to the app./
cruzzmz said:
hopefully u can extend the kitchen to xda zinc also ... here r the files u req
Keep up the good work
Click to expand...
Click to collapse
caxio said:
the files for hermes tytn
Click to expand...
Click to collapse
Thank you for your contribution. I have added it to the newest build.
ababrekar said:
hi ivanmmj.. you might wanna consider checking that link in your first post.. it points to http://here's a link to the app./
Click to expand...
Click to collapse
I'm not sure what you're referring to.
ivanmmj said:
Thank you for your contribution. I have added it to the newest build.
Click to expand...
Click to collapse
is elfin added too?
I'm not sure what you're referring to.
Click to expand...
Click to collapse
the link to ur kitchen thread in first post
ababrekar said:
is elfin added too?
the link to ur kitchen thread in first post
Click to expand...
Click to collapse
Yes. And: Oh. lol I see what you mean now. Fixed to the proper post and in the proper format. lol

problem with swype

hi folks, hope someone han help with this.
i'm trying to cook in the latest version of swype (cabbed by lord yuz. from a 'certain' site)
i've converted the cab to an ext but even though it builds it's not opening the keyboard. i can't see what i'm doing wrong but if anyone has a working package or any ideas what i'm missing i'd be grateful
thanks
Chris
You need to replace 'ModelName.txt' in Operatorpkg with a T-Mob modelname.
chrisd1a1 said:
hi folks, hope someone han help with this.
i'm trying to cook in the latest version of swype (cabbed by lord yuz. from a 'certain' site)
i've converted the cab to an ext but even though it builds it's not opening the keyboard. i can't see what i'm doing wrong but if anyone has a working package or any ideas what i'm missing i'd be grateful
thanks
Chris
Click to expand...
Click to collapse
Laurentius26 said:
You need to replace 'ModelName.txt' in Operatorpkg with a T-Mob modelname.
Click to expand...
Click to collapse
thats what i initially thought from earlier versions but i understood this version was cracked to avoid that requirement?
thanks for the advice mate, i'll give it a go
If you are using ervius kitchen, and you created the EXT from the CAB,
normally on your app.dat file you will have only "Directory("\Windows\Swype...")"; try to exchange all of them with the equivalent like "Directory("\Program Files\Swype...")" the problem is that you will have a duplicate of all your file (each in windows directory and also in program files\swype directory).
To make it your default SIP use this reg key in your app.reg.
[HKEY_CURRENT_USER\ControlPanel\Sip]
"DefaultIm"="{7D51A54F-14D0-4eda-AC8D-0AE175C344E8}"
I hope it will help you.
solidpowder said:
If you are using ervius kitchen, and you created the EXT from the CAB,
normally on your app.dat file you will have only "Directory("\Windows\Swype...")"; try to exchange all of them with the equivalent like "Directory("\Program Files\Swype...")" the problem is that you will have a duplicate of all your file (each in windows directory and also in program files\swype directory).
To make it your default SIP use this reg key in your app.reg.
[HKEY_CURRENT_USER\ControlPanel\Sip]
"DefaultIm"="{7D51A54F-14D0-4eda-AC8D-0AE175C344E8}"
I hope it will help you.
Click to expand...
Click to collapse
cheers mate, i've tried the modelname and no joy the ext i'm using is writing to the windows directory, i've edited all the paths but no joy on it working. also it's not duplicating the files.
i've cooked in nuesipdefault so swype is selectable. gives the option to choose.
any other ideas from anyone as i'm really stuck with this
maybe you will need also this on your app.reg
[HKEY_CURRENT_USER\Software\Swype]
"DataDir"="My Documents"
"FirstTime"=dword:1
"InstallDir"="\\Program Files\\Swype"
Swype is one of those apps that cant be set only in windows... sorry bud but it seems that some paths are hardcoded inside the exe file not just in regs, i tried sometimes and cant make it works just in windows\
solidpowder said:
maybe you will need also this on your app.reg
[HKEY_CURRENT_USER\Software\Swype]
"DataDir"="My Documents"
"FirstTime"=dword:1
"InstallDir"="\\Program Files\\Swype"
Click to expand...
Click to collapse
+ Que PPC said:
Swype is one of those apps that cant be set only in windows... sorry bud but it seems that some paths are hardcoded inside the exe file not just in regs, i tried sometimes and cant make it works just in windows\
Click to expand...
Click to collapse
cheers folks, i'll give this a try tonight and see what happens, fingers crossed.
failing that if anyone has a working ext package for Swype v3.19.20.20.6343
i'd be very grateful for a share
im using this package and it workes for me. i remove the video, french, italien and spanish language
http://rapidshare.com/files/388900459/Swype_3_19_20_20_6343_0.7z.html
password: xda-devs
chrisd1a1 said:
cheers folks, i'll give this a try tonight and see what happens, fingers crossed.
failing that if anyone has a working ext package for Swype v3.19.20.20.6343
i'd be very grateful for a share
Click to expand...
Click to collapse
ratelutz said:
im using this package and it workes for me. i remove the video, french, italien and spanish language
http://rapidshare.com/files/388900459/Swype_3_19_20_20_6343_0.7z.html
password: xda-devs
Click to expand...
Click to collapse
cheers man, will give it a try
edit: this works. thank you, thank you thank you
hey chris... the cab you sent me is only for big ressource not all res allowed and i dont have langs BTW its overlapped in the softkeybar , does this in RS is compatible with all the resolutions?
Oh forget it the link is dead now
if this doesn't work try the swype packages from chucky kitchen (hd2 rom) that must work.
ratelutz said:
im using this package and it workes for me. i remove the video, french, italien and spanish language
http://rapidshare.com/files/388900459/Swype_3_19_20_20_6343_0.7z.html
password: xda-devs
Click to expand...
Click to collapse
link isn't working anymore. any chance someone could repost?
I would love this link also.
here you are
after trying all the different cabs and ext packages of swype that I could find,
none of them worked when cooked, so I decided to play around with the files from
3 different downloads. I finally managed to create a package that works with
osKitchen for the HD2 - Leo. just extract to your EXT Packages folder.
DOWNLOAD REMOVED - DUE TO XDA RULES
Farsite said:
after trying all the different cabs and ext packages of swype that I could find,
none of them worked when cooked, so I decided to play around with the files from
3 different downloads. I finally managed to create a package that works with
osKitchen for the HD2 - Leo. just extract to your EXT Packages folder.
Click to expand...
Click to collapse
You have mixed up the previous version with the new one?
I have checke the package and there are a lot of different in the basic keyboard files.
totalcmdext said:
You have mixed up the previous version with the new one?
I have checke the package and there are a lot of different in the basic keyboard files.
Click to expand...
Click to collapse
yeah, its a combination of the Fixed.Blackbird cab and the EXT package with NL patch that can be found on the forums. it works perfectly on my HD2 when cooked using oskitchen.

Categories

Resources