Hello guys...
It hadn't happened to me before and I don't know what triggered it. Since this morning, every time I try to browse the web, even if the Universal is synced to the pc, PIE gives me a "page cannot be found" error. Opera, on the other hand, works fine!
Any ideas? :roll:
I've had this problem too on my XDA IIi and also on older model XDA's. It only happens for me when connected to ASync, GPRS i have no problems. A quick soft reset solves the problem but it returns after so long. My emails would still download...
I don't seem to have noticed it recently (maybe cause i don't use it so much) but i did use the hack to move Temporary Internet Files to storage (or SD card) where i have much more free space. Give that a try, tell me if it makes a difference!
I have a problem when connected via activesync in that sometimes when trying to use internet explorer when it connects to a page it just simply closes down.
That is internet explorer just closes. Not hidden, not under running tasks. Have only noticed it when trying to access a couple of particular sites.
So I am wondering if there is a piece of code on the web site that IE doesnt like and occasionaly trips it over.
Not a problem to me yet. I either dont bother accessing the page or try a soft reset.
Did you move your temporary internet files to your sdcard? Does the problem go away if you go into tools\options\memory and click delete files and click clear history? If yes, your temp files have possibly become corrupt.
I use Storage for my temp internet file/cookies and history but you can use a SD card. This does have the benefit of surviving a soft and hard reset.
It's been a while but i can remember clearing files in the options when using normal memory, it still failed to load/find pages until i soft reset. Even tried completely closing PIE and starting up again, still had to do a reset.
For me it seemed to happen more if i had set the options to download all images.
akpe said:
Hello guys...
It hadn't happened to me before and I don't know what triggered it. Since this morning, every time I try to browse the web, PIE gives me a "page cannot be found" error. Opera -and wmirc- on the other hand, works fine!
Any ideas? :roll:
Click to expand...
Click to collapse
up still face the same prob
I'm facing the same problem after upgrading to the latest firmware, IE won't open any site, but Opera, MSN, Email .. etc are working fine.
Yo,
what I get is a lot of red-X'd pictures - WHY is that??
Also Bluetooth internet browsing is very flakey - keeps diconnecting?? (although activesync connection is stable) ....
so, the answer is....
replace that half baked piece of Micro$oft crap with a decent browser, such as Opera?
BTW, where do I get Opera for the PPC anyway??
Andy
(I be mostly writing this reply on my Xda using WiFi connection at work to gain internet access).
akpe said:
Hello guys...
It hadn't happened to me before and I don't know what triggered it. Since this morning, every time I try to browse the web, even if the Universal is synced to the pc, PIE gives me a "page cannot be found" error. Opera, on the other hand, works fine!
Any ideas? :roll:
Click to expand...
Click to collapse
With my old PDA2K I used to have the same problem. The solution in my case was to execute the file Welcome.exe from the windows directory. It seems the connection settings or explorer settings got corrupted from time to time and running the welcome.exe seemed to correct the problem without affecting any other settings of the machine. But Iam not sure this is the problem in your case... but maybe it may also affect the universal and not just the blueangel.
Related
Hiya,
I have a problem with internet explorer on my Xda2, Ive searched the forums and cant find anything that helps. The problem is that whilst I'm surfing on my xda and go to another program, then switch back to IE and IE has reset back to the home page. This happens all the time, which means if someone messages me on msn whilst I'm surfing I lose the web page. Its very irritating and was wondering if anyone else has experienced this?
Hi,
I am not really sure what causes the problem you explained, but why dont you consider other web browser for your XDAII? Here is the list of some alternative web browsers for pocketpc:
1. Access Netfront 3.0 (www.access-us-inc.com)
2. Thunderhawk (www.bitstream.com/wireless/)
3. MultiIE (www.multiie.info)
Personally, I prefer Netfront and Thunderhawk. Anyway, you should check those for yourself.
Regards.
-Red_Toyol-
Landofnod said:
Hiya,
I have a problem with internet explorer on my Xda2, Ive searched the forums and cant find anything that helps. The problem is that whilst I'm surfing on my xda and go to another program, then switch back to IE and IE has reset back to the home page. This happens all the time, which means if someone messages me on msn whilst I'm surfing I lose the web page. Its very irritating and was wondering if anyone else has experienced this?
Click to expand...
Click to collapse
The cause of the problem is that Pocket IE gets closed. So when you "switch back" to Pocket IE, you're actually launching it again. And the new instance of Pocket IE starts at the home page. Too bad I only know the cause of the problem and not the solution.
Perhaps you are hitting the 32 process limit when you switch to another application.
Perhaps try upgrading to the latest ROM, and also remove unused apps from the windows\startup folder.
HTH,
Dave
Try to set the home page to BLANK!
Also try MultiIE its the best of all,, you can save images, save web pages, scroll the page by tapping it, and much more....
Hi
I have upgraded to Activsync 3.7.1 and although the sync works between Outlook and PPC I cannot explore the PPC either using explore on the ActivSync menu or My Computer My Device.
I am trying to install TomTom 2 Maps to my SD card and it is not being regionised.
I have uninstalled and reinstalled and still getting the same. Any anyone else experienced this? I would be very grateful for any ideas on how to sort this.
Many thanks
Matt
An update
I preformed a hard resent on the device and still I cannot explore the PPC. HELP PLEASE.
Matt
So no problems before
So if I understand it right, You didn't had any problems before the upgrade to 3.7.1
That is correct, worked fine.
Make sure you've got all explorer windows closed before syncing.
If you have a previous window open, before syncing none of the windows will display anything - you need to sync and then open explorer
That is strange
I don't have to close any window.
OK. so if you place the machine into the craddle, you won't get the message connecting to.. is that right?
Hi
I do also have a problem with active sync 3.7.1 when I want to sync anything on my PC with my XDA.
I can only explore my device if I don't select contact, mail or something, otherwise my XDA crashes and I do have to do a soft-reset.
Try to have your partnership without any syncronisation... even if it bothers me a lot, I can currently live without syncronisation... hopefully I find the time to investigate this issue.
Does anybody has the same expierence ????
I don't want to do it with try-and-error...
What are your connection settings
Are all the three boxes ticket under connection settings? ( under active sync)
i seem to recall that zonealarm need to let some program get access before i can sync
other software firewall may require the same thing
including windows internal firewall
It worked before with older version so
If it worked fine with the older version, then it must be about settings within the new version (Igues)
When you installed the new version of activ sync, did you also altablish a new full partnership?
activesync hangs @ 91%
been doing wuite a bit of work on both the phone and laptop... no complaints at all.. but this morning AS didnt work.. so i uninstalled and reinstalled it again.. hoping that itd get back to place.. but while installing from CD or HD it stops @ 91%. says wceusbsh.cab file is not being read..! took it to the system administrator.. removed all entries from registry... and modified the evnt viewer as well.. everythng in vain..
the last retort is to take the back up of my comp.. and reinstall OS.. but is there anything i can do to avoid it..?
cherish
For some strange reason, Activesync keeps running on my XDA Mini S, I have no idea why can anyone help?
Basically after a soft reset if I check the memory no programs are running, but after sometime if I have done nothing with the phone, and check, it is running again, I close it down and then again after a while it is there.
This is not whilst or after connecting to my PC it is strange...
Is it because u have a wifi connection over which is constantly trying to sync with your pc?
Believe this is a known bug (sure I've seen something mentioned on here before)
try a search over this forum
Can't find anything in previous posts...
I mean the only thing my phone syncs is my desktop...it is not set up for any other sync, except for USB..no schedule nothing, so why activsync keeps launching is a mystery to me...
Any further help will be much appreciated...
Are you using any weather plugins etc? Anything that might request a remote sync? Use something like memmaid to check your services to see if you've got anything hidden like this.
V
Nothing at all...
Will try to see what is going on with memmaid
I also have the same thing happening. It only syncs over usb but as someone said must be when I connect over wifi its kicking in.
Thing is when I shut it down my wizard seems to show a better turn of speed. Wish I could get it to stop trying to connect only when hooked with usb to be honest. The less programs running the speedier the wizard will be.
Creat a dummy server sync in activesync. Put anything as server address and that shd be fine. Ignore unresolved .... message after syncing.
victor
MemMaid has done it...I think...
Thanks to Vijay555 for suggesting using MemMaid.
Checking the running PROCESSES on MemMaid I found something called repllog.exe which I deleted and it stopped the ActiveSync running.
Then I did a soft reset and synced. The file is back where it should be but no unexpected incidences of ActiveSync running. I guess the repllog.exe file had become corrupted.
Be warned that the unit might seem to run a little slower after the soft reset, but within a few clicks it is back to normal.
Thanks for your time & help guys
Create a fake new ActiveSync connection. I say fake because you just need to make up the server name... put anything you want there. After you have created the connection, look at the scheduling options and make sure that it is not set to automatically synch. Once you have disabled automatic synching, you can remove that fake connection and your problem will be solved. I found this on www.pdaphonehome.com .
Sunnychad
replog should know what it's doing. Glad it sorted your problem out though!
V
Not so cured...
OK it now only kicks in every 4-5 hours so I will try the fake server route...
JesseRPI said:
Create a fake new ActiveSync connection. I say fake because you just need to make up the server name... put anything you want there. After you have created the connection, look at the scheduling options and make sure that it is not set to automatically synch. Once you have disabled automatic synching, you can remove that fake connection and your problem will be solved. I found this on www.pdaphonehome.com .
Click to expand...
Click to collapse
Just tried that and hopefully it works. Active really does seem to be one of the main reasons the Wizard slows up.
When you have synced with a pc ie to install a program ( only reason I use AS ) will I then have to close the app down on my wizard in running programs or will it dissapear itself and not return ?
The fake server technique works by not starting ActiveSync on its own. However, if you start it in order to sync via bluetooth/usb, you will still have to manually end task it in order to close it again. The good thing is that you won't have to worry about it starting by itself, which will save you both memory and processing power, as well as the fact that you don't have to install any third-party tools for this solution.
Good stuff. I could always tell when it was running by the speed of my Wizard. Another gr8 tip.
Today my ActiveSync connection stopped working.
It tries to connect for a while then it comes up with "ActiveSync cannot connect to the Windows Mobile powered device. ..."
WM5torage works, so does pinging the Wizard.
Things I tried:
-Using the repair option from Active Sync setup
-Reverting the Wizard to a 3 day old backup made with SPB
Nothing worked :-(
What else (other than a hard reset) could I try?
See below for solution. And don't touch the notification queue if you don't know what you're doing
check if you firewall is blocking the activesync connection
if this is not the case ... good luck
try reinstalling activesync..
or get the latest one..
Install this cab application and select serial instead of RNDIS, just tap at YES button, and activesync will work perfect
Activesync gone mad
I am having the same problem with activesync not actually syncing my contacts and calender despite making all the noises I usually associate with a successful sync. My contacts are not updated and my calender has none of the appointments from outlook uploaded to it.
I have done a soft reset. a hard reset, gone back to activesync 4.2 and nothing works. I have also tried the usb switch that is mentioned elsewhere and no joy. I have other ppc's running PPC2003 and these are fine and update almost immediately, its only my xda mini s that is being a sod. I never had a problem before activesync 4 and several other machines before the mini s. I should also mention that my outlook files are fine and work on all other machines.
It is bad business that the world is becoming dependant on such bad software as this. It is not progress to make things worse and Mr Gates should be held to task for the problems caused from forcing us onto unreliable software in the name of progress. I was happy enough on activesync 3.8 and WM2003 and never had problems.
Please, Please someone give me an answer before hammer and xda meet in heated discussion.
I have the same problem with my MDA and both my PC and Laptop. I have been trying to resolve this problem for months. It is unbelievable that it is so hard to resolve this issue. I have been posting on this forum and on others and still am looking for a resolution. Maybe someday, someone will resolve this issue. Thanks for your postings and help in trying to resolve this issue. Frustrated beyond belief.
Sorry, this did not work either: Install this cab application and select serial instead of RNDIS, just tap at YES button, and activesync will work perfect
Update to previous
Just an update. I have tried this on another machine using the pst file from my machine and it syncs fine. Clearly, there is some problem on my machine with my software.
I have also removed outlook and reinstalled it. Also removed all profiles on main machine. At present, my calendar will sync but my contacts will not. Outlook tests say there is nothing wrong. Short of a complete software install I can not see another way to cure this other than the big hammer.
Go figure.
p.s.
If I had a hammer and Mr Gates was in front of me I would not be held responsible for my actions.
I found a corporate firewall that was preventing sync, I have to shut down the service and then it worked. Strangly, it would sync over bluetooth without stopping the service. A bit OT, but I can't seem to browse while synced. It asks for proxy info which I type in but it says bad user name/password. I KNOW I'm putting in the right proxy info (it defaulted it from my PC which browses fine) and correct user name/pw/domain. Any ideas?
FIXED
No firewall, no ActiveSync, no connection problems at all.
Fixed it by reverting my database to a backup.
When i had the well known alarm clock troubles i accidentially (= out of ignorance) deleted the whole notification queue.
Word of advice: Don't do that, it'll screw everything up
shadow# said:
No firewall, no ActiveSync, no connection problems at all.
Fixed it by reverting my database to a backup.
When i had the well known alarm clock troubles i accidentially (= out of ignorance) deleted the whole notification queue.
Word of advice: Don't do that, it'll screw everything up
Click to expand...
Click to collapse
1. What is the purpose of the Notification queue?
2.What does it have to do with ActiveSync connectivity?
3.How is Notification queue set to make AS work?
Still cannot resolve my connectivity problem with my MDA. Thanks in advance.
asctony said:
1. What is the purpose of the Notification queue?
Manages the Operating System's list of scheduled actions.
2.What does it have to do with ActiveSync connectivity?
Still have no idea of how to get this back inot Notification queue.
3.How is Notification queue set to make AS work?
Still cannot resolve my connectivity problem with my MDA. Thanks in advance.
Click to expand...
Click to collapse
Still looking for some help on this.
check this solution:
http://forum.xda-developers.com/showthread.php?t=271174&highlight=activesync
Is this related to the inability to pass-through browse while on activesync? I am able to sync fine, but when I try to browse I get an error saying bad proxy info (which I've check 1000 times). Or sometimes when I'm messing around with the settings I get a "lost connection" message rather than the invalid login/password. So frustrating! Will switching to the serial type of connection help me?
ActiveSync must be one of the most frustrating applications out there. I have tried all recommended fixes and still cannot get ActiveSync to recognize my MDA. The last time I did a sync was 9/06. Too much BS using this application. I have searched all over the web and cannot find any application that will allow me to update my PIM file without ActiveSync. So, I guess I will finally give up on this. Thanks to all of you who have tried to help me. Thank You!!
Hi
I got my HD2 yeasterday flashed it to 1.66 before I even put a sim in it and its been working really well. O2 even sent me a phone I could flash from HTC's website.
One is is that after maybe 1 hour or 4 hours windows live mobile will fail to connnet to msn and pull down emails. Restarting the phone is the only fix.
I have unticked the proxy setting just for it to retick when I click OK. Everything else will work fine just WLM will stop working.
Any ideas why and how to fix it as it is a very helpful feature?
Same, WLM is just useless. It will crash after about an hour starting by "the wireless network is currently unavailable" even if it is, at which point it's impossible to force it to disconnect, to close it, and it will hang task managers that try to enumerate the running processes so no way to kill it. After several long minutes it will finally say "you've been disconnected" stops hanging everything and can be closed, but relaunching it and trying to reconnect will only give a "network is unavailable" popup straight away before it even tries to connect. Usually it will cause lockups to other programs too in its wake, forcing a reboot.
I'd really appreciate a solution or alternative. Slick crashes with memory errors, IMPlus only manages to connect to msn half the time even if other protocols always work... I just can't find any msn client that actually works.
hmmmm guess ill have to wait for an update to appear. Meanwhile im going to unsync my email and do hotmail via pop3/imap.
Please post which version of WLM you are using (or is it just the one with the stock rom?).
I`m using an updated version and it's working flawlessly here (although it had problems syncing in the beginning).
OK:
try this one
http://rapidshare.com/files/333732216/WindowsLive.PPC2005_arm.cab
or
http://www.megaupload.com/?d=L4VOCVG1
ive tried the updated version from the market place and it still does it.
I have loaded your first link onto my phone and we shall see how it goes. I have noticed if i leave MSN signed in it seems to do stop syncing and when i sign out msn the email works again.
10.7.0061.0500.2000, which is cooked in the ROM i use (see below).
And they really could make longer version numbers...
OK, downoading yours now.
tried both of them and the fault still shows. I have created a post on the windows mobile forums which I hope MS will see and will get to the bottom of the issue.
Here is the post for those who wish to contribute: social.microsoft.com/Forums/en-US/windowsmobile/thread/5c420f13-001e-42d6-924c-7385b0274221/ <<< Copy and paiste into your browser as im not allowed to post links yet.
i have the EXACT same prob! my life wud be SO much better if this prob didnt exist. its so frustrating i cant stand it anymore!!! come on ive solved EVERY prob on xda-developers somebody MUST knw the answer
I met the exact same problem. So I have to find a 3rd party IM software Beejive IM.
But it's pretty strange that in WM system, we even can't use MSN.
Hope some one could fix the problem.
chling said:
I met the exact same problem. So I have to find a 3rd party IM software Beejive IM.
But it's pretty strange that in WM system, we even can't use MSN.
Hope some one could fix the problem.
Click to expand...
Click to collapse
does the nudge feature work with mobile msn.or do i need to update the version.where can i get the latest version of wlm
I don't use this software, but have you attempted to edit the registry?
EG what is the proxy it defaults to?
Whenever I install a clean ROM, I *must* go in the registry to HKLM/Comms/ConnMgr/Providers/(something)/(something)/Proxy and clear the key - otherwise youtube NEVER works.
The reason behind this is because everytime you load youtube, Youtube assumed ^that proxy was the one you needed, so it copied the value to HKLM/Software/HTC/Youtube/ProxyName, and nothing worked.
I'm assuming similar behavior is happening here?
So my question is: WHAT proxy is it automatically using?
It can't be a proxy issue, because as mentioned msn works, just that it will "crash" after about 1hr of use, and only then won't connect anymore until the next soft reset.
Hi there!
Same problem with windows love here. At best the service is reasonable....most of the time its just not!
Anyway; instead of just complaining I want to make it better and try the new version in the supplied link above. There is a notification however about deleting the older version existig on the phone before installing the new version. Question: how to delete the old version?? It's not in the programlist...
Anyone?
It asks if you want to uninstall, just answer "yes" and it does (or does not, but who cares, it does install the new one afterwards )
The one in the link was the same I already had though, so no help. I'm using IM+ lite now. Not perfect, but at least it works.
HD2
Ok i dont know if this is anything to do with this thread but got a hd2 but msn doesnt work on wi-fi? does anyone know how to get this fixed? it only works on Data
Thanks
Has anyone found a solution for this yet?
Just wondering, why dont you use the default mail client on WM(setup the mail account) and for messenger, use parlingo? I too had my run with Windows live messenger failing me. I actually did what i've typed and became a happier man. Maybe you like to try that?
i use only exchange email sync and that works perfekt. Lets me have gmail on outlook exchange. But it sux that we cant use a microsoft product full out on a windows phone, makes no sense. All rom cookers seem to given up on msn messenger. But setting hotmail only to sync "as ithems arrive" works great.
Yeah I use Palringo but WLM has much better visuals, ah well I'll give up on it aswell.