Related
Hi guys,
I've been playing with PIToday for a couple of days now but I noticed one thing: My bluetooth icon on the Today screen disappeard after using PIToday. The only way to get it back for me is unchecking PIToday and soft reset. This is a bummer!
I've been checking some sites for solutions but could only find the solution mentioned above and one solutions for a 3870. This was putting a shortcut to the bluetooth icon in the startup folder. In the case of a MDA II, there is no such shortcut possible. I checked the registry and Windows directory but the is no .exe file which will start the bluetooth icon. Only .dll. But I don't know where to point it to. :?:
Any other suggestions? Because I would like to buy PIToday but I still want to access my bluetooth from the Today screen.
Wouter
Even though I am a huge fan of Pocket Informant, i experienced a lot of issues with the PI today plug in and stopped using it. It may be incompatability with other software I also have installed but as well as the missing BT icon it also caused instability (lock ups) and the occassional auto soft reset.
In regard to the missing BT icon though PI today is not the only culprit. Users of Pocket Breeze from SBSH Mobile software have reported the same issue. Only way to restore it is unselect the today plug in and soft reset.
Ed
Hi Ednap,
Somebody suggested a sort of sulution for me: Using Zenphone. In Zenphone there is an option to turn bluetooth on and off in a profile. And it seems to work!
It is not the solutions but a least it is workable.
Wouter
hi,
some kind of solution
get the tool "No Plugins today" (h**p://www.ictinus.com/NoPluginsToday/)
install it (of coz)
insert into your registry a new string like this
HKEY_LOCAL_MASCHINE\init\LaunchXX where XX is the highest number of the Launch under INIT (I use "Launch90")
enter as the stringvalue the path to the tool e.g. "\Storage\NoToday\NoPluginsToday.exe" or whereever you have installed the tool
insert a link under \Windows\startup or \windows\autostart (depends of the language) and point it again to this tool. Rename the Link in such way, that it will run last (eg. "XXXNoToday")
ok, thats all, reset your device, and enjoy your Bluetooth icon
It is not a failure by any of the Today-Plugins, which make the icon vanish, it's just a timeout of the btdll, caused by Plugins, which need too much time to initialize itself, so the icon just nor appear.
What does this thing?
after reset it removes the todayscreens, the bluetooth icon appears, and after that the notoday-tool switches the plugins on again.
you need some more time (3-4 secs) after the reset, but, who cares, you got the icon back
my2cents
Dejan
Nice work, IvkovicD!
I'll give it a try and I'll post this solution also at the PIToday forum. I'm sure this solutions is a great help for Deje the maker of the program.
B.t.w I tried SnoopSoft Dash Today Advanced today to see if I like it. It is not bad. A bit slow but guess what happens?
My headset profile is now gone! First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter
To create a shortcut to Bluetooth copy the following into a shortcut file (text file with lnk extension i.e. Bluetooth.lnk):
34#\windows\ctlpnl.exe cplmain.cpl,23
and copy it across to your PPC
My headset profile is now gone!
Click to expand...
Click to collapse
Might it be that your profile is just gone from the Today screen? Check Settings>Personal Tab>Today>Items Tab and see if Profile is checked.
Hi Mark,
No. The headset profile was not there anymore in the list. I contacted Chris Scott, who makes DashToday and the only solution he had for now, was to uninstall the program.
Not realy a good option in my opinion.... Especialy because I just bought the program because there is no trial avaliable.
For your other solution:
I want to make sure that I realy understand. You want me to make a textfile and name it i.e Bluetooth.lnk. In this file there should be the line:
34#\windows\ctlpnl.exe cplmain.cpl,23
Then copy this file to my PPC and presumably to the startup directory?
Just want to make sure.
Thanks,
Wouter
Then copy this file to my PPC and presumably to the startup directory?
Click to expand...
Click to collapse
Copy it to the Start Menu folder. It won't bring back your bluetooth icon back but you will be able to access the settings from the start menu.
Thanks,
I give it a try later.
Wouter
wouterk said:
First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter
Click to expand...
Click to collapse
Hi,
I know this effect. I've have this "vanishing", too, if I install too much today- plug ins. Just grab your favourite registryeditor and delete some build-in today-registry entries for today items, e.g. original-task, or some of the other build in ones. If you need it (I don't believe that , make a backup, but really, do you need them?)
reset your device, the missing plugs should appear again...
Sometimes, the OS just do not display some today-plugins, if there are too much entries into registry, even, if you do not activate them...maybe at MS nobody thought that someone needs more then 5 todayplugs at once...
just joking
l8er
Dejan
Hi Dejan,
Sounds like an interesting solution. Want to give it a try but I can't find the path to the right regkeys. :?: Do you know were those keys are to be found?
Wouter
Hi Dejan,
I found the reg keys. (HKLM\Software\Microsoft\Today) and deleted the Task, Calendar and Owner Info keys. Then I did a soft reset but my Bluetooth icon didn't reappear.
Too bad.
Did it work for you?
Wouter
Hi:
I personly feel that the dial pad is kind of small if I am using finger to dial.
Is there any way to make the dial pad larger?
Thanks alot!
big dialer
this is the solution i think
ok.. Thanks laich71, but it doesnt work.
I found the solution
dl that E-TEN_M600_Dialer_Skin.zip
install .cab then reset.
It's working good.
for blue skin dl this one, and dump everything in /Windows
replace all then reset.
ericlin0122 said:
ok.. Thanks laich71, but it doesnt work.
I found the solution
dl that E-TEN_M600_Dialer_Skin.zip
install .cab then reset.
It's working good.
Click to expand...
Click to collapse
Thanks guy, but I have tried this one already for a long time.
It will disable the smart dialling of my prophet.
The dial key is big, but it hard to find the number.
Are there other solutions?
The " SmartDial+EtenSkinPortretD_v2.cab" does work. I've been using it - with big dial like Eten and with smartdial. To Install, you need to soft reset first then installation without running any prog. If it still does not work, then use a program (eg memmaid) to kill the cprog.exe which startups on derfault, then install.
chuaniau said:
The " SmartDial+EtenSkinPortretD_v2.cab" does work. I've been using it - with big dial like Eten and with smartdial. To Install, you need to soft reset first then installation without running any prog. If it still does not work, then use a program (eg memmaid) to kill the cprog.exe which startups on derfault, then install.
Click to expand...
Click to collapse
Thanks guy, as u mentioned, I will try it in safemode. I think it might be sure than the other way.
Hello all,
i've tried this, with the smartdialing piece of it too. It does work, including smartdialing.
However, i've now reset my phoen again as i was getting some strange effects:
*When going from camera mode back to the start screnn it would end in landscape.
* some hangups from time to time
*sluggish phone reactions.
This was not acceptable for me, so i removed this. Now all is normal again.
But, i would still very much appreciate bigger numeral pads on the phone!
help!!! all expert
My dopod 838 pro hangs sometimes once per day or on alternate days. Other than tat its working fine.
Will hard reset solve the prob>?? Will hard reset damage the phone? coz as everything is working well i don wan to do hard reset tat will worsten the phone function...
Anyone? help
You can hard reset your device as many times as you wish, it won't damage your phone at all.
Just be aware that all your personal information and all programs installed by you will be erased.
In other words, it will be returned to factory defaults.
Regards,
Rayan
juninho_10 said:
help!!! all expert
My dopod 838 pro hangs sometimes once per day or on alternate days. Other than tat its working fine.
Will hard reset solve the prob>?? Will hard reset damage the phone? coz as everything is working well i don wan to do hard reset tat will worsten the phone function...
Anyone? help
Click to expand...
Click to collapse
Welcome to the board juninho, Rayan is right hard reset will not harm your device. I would not be rushing to hard reset though. A hang can be caused by many different things, but folks on this board cannot make very targeted suggestions unless they know:
when the hangs occurs
are you running any particular application,
do you have a few today plugins running,
do you fully close apps when you are not using them,
have you taken steps to stop active sync running by itself,
what apps are installed,
what mail eg push mail options do you run?
is device connected to the PC at the time it hangs,
does the hang occur at night or when on charge
does it occur when a notification or an alarm is due
etc, etc, etc
In short I'd try pinning down the cause or else a hard reset may only temporarily fix the problem until you re-create the problem again.
Cheers
Mike
PS Avoid attention grabbing thread titles and make the title as descriptive as possible. This helps people who are searching by thread title, I doubt anybody searches for the word "weird" if they are trying to get an answer to a specific question.
Thanks
oh ok thanks .
My applications are as follows:
IN PHONE MEMORY:
1) Pocket plus (cant use)
2) Spb dairy
IN MEMORY CARD:
1) Lexisgoo english dictionary
2) sprite backup(cant use)
3) transportation bus guide
4) spore map
Those cant use i just delete prog wit files left. ( I don tink i wan use registry editior)
Tot of buying spb backup - any recommanations???
hang
and forget..my phone hangs most of the tme after normal usage. The backlight went off wit the todays screen showing- then all the rest freezed
Well there are one or two things that concern me. It appears you uninstall by deleting files and not the add remove programmes facility. This can leave a messy load of unused files in the system/memory and it also makes the registry untidy/slow.
There are a couple of programmes that you say "can't run" but they are ones that should run. In fact sprite backup should be fine and is a good backup facility. (I use SPB however and find it excellent if you backup regularly and keep say most recent 5 backups + one done immediately after a hard reset. I then delete one of the oldest ones for every new one I create. I keep more than one because it's quite likely you backup thinking ebverything is working fine and then find later there's some application that used to work but you've saved after it went wrong - so you can see it's good to have a few backups going back maybe a couple of months.)
I think you have a choice here. Try to pin down what is causing the hang - could take a long time. Or go for a hard reset. In your case I fancy the hard reset because you have only a few things installed.
This may not cure your problem - in fact it lkely will not - but it will clean your system. This done you can then start doing some of the standard things listed on this forum to avoid hangs - I can pint you in the right direction if you need it.
Throughout this process take quite a few backups i.e after every installation you make. - boring I know but eventually you can reduce the number of backups you do.
Last alternative - just live with one hang a day. Soft reset does not take long. Could be very annoying though!! In normal use I think from experience that a hang once a week to two weeks is about normal!!
Mike
wow
wow thanks for e good advice!! ya think i just maual delete the prog tat don work and leave the files behind(i m afraid of deleting files tat will cause the phone harewire.
I tink i am goin to get the spb backup. I dwnloaded the trial version but cant backup everything cause tink somtin cause the hang prob. If after i do hard restart i will onli dwnload those prog which works and which i need.
i can keep my fingers crossed and see wat happens next.if it still hangs i will do a hard reset.
And any video player which i can use for dopod 838 pro to play music video to recommand?
goto
WM5_Tweaks_Performance
help
hELP....I finally did my hard reset-& dwnload essential prog - but it got worst! hang near to 3 times per day! wat shld i do>????
Right nw i got:
Phone memory- Pocket Plus
Spb diary
Card Memory- Spore digital map
Lexisgoo English dictionary
Pocket Xpdf
Spb backup
Transportation guide
Pls help
Did you take my advice and create a backup after EVERY installation you made? Indeed did you take a backup before the Hardreset?
Mike
Hi Juninho,
anyone of the apps you mentioned could be the root cause of your freeze issues.
It would be wise if you install a single app at a time and then rigourously test the stability of your device before installing another app.
I guess you might have to repeat the hard reset and start from scratch and remember take a backup after each app installation so ou can easily "roll-back" to a known current working state (this will save you future manual re-installations).
juninho_10 said:
hELP....I finally did my hard reset-& dwnload essential prog - but it got worst! hang near to 3 times per day! wat shld i do>????
Right nw i got:
Phone memory- Pocket Plus
Spb diary
Card Memory- Spore digital map
Lexisgoo English dictionary
Pocket Xpdf
Spb backup
Transportation guide
Pls help
Click to expand...
Click to collapse
?
U mean every prog b4 installation do a backup? if i do , hw am i suppose to kw if which prog cause e hang? i mean- tat means i will have to install one prog, backup- then use it for few days to see if it hangs- then dwnload next prog- and the process continues???
Thanks
right on the money...
standby
I did i hard reformat but did not do single dwnload+ backup coz all my prog quite impt to mi.
However i found out one solution. Whenever after i used my phone, i just press the standby button everytme- this solved the hang prob
Thus tink it hangs coz it got prob goin into standby mode- anyone can help?
(even if i find out which appication hangs my phone-wat can i do>? don install? pls advice)
I set up an alarm clock on my P3600. When it woke me up I didn't get the soft key to shut it off. From that point off - it hounts me. Soft reset the device so many times in the last few hours it's driving me crazy. I will get the wakeup tone right after I soft reset EVERY TIME. and then every few hours during the day. I had MS Voice command which I removed. I tried to set a new alarm but that one just added yet another unstopable reminder. I think I also don't get notification for meetings so maybe something is wrong in the registry???
HELP... I don't want to HR the device.
WM5 by the way.
Thanks,
Nir
By the way - tried to remove the notifications from the queue using pocket mechanics but after soft reset - they all came back....
Had the same problem, what solved it was a hard reset.
ari79 said:
Had the same problem, what solved it was a hard reset.
Click to expand...
Click to collapse
had the same problem also...
only hard reset helped...
what s/ware are you using for your alarms?
I was using the built-in clock.
Just hope that official WM6 is out soon so I have two good reasons to HR..
i have the very same problem!!! any ideas how to resolve it without HR?
fantomex said:
i have the very same problem!!! any ideas how to resolve it without HR?
Click to expand...
Click to collapse
I didn't find any
sometimes ago i install some 3rd party alarm and remove it, bcoz it did not suit me. and install another one.
but first one left some message in notification queue, which always complain "Cannot find program bla-bla-bla...".
solution: install any software (like SKTools) and look inside notification queue (this queue respond for any notifications/alarms/etc..) and cleanup unwanted notifications.
hope, this helps.
added: sorry - did not read that you already try to do this. but anyway this is a problem - notification queue somehow hold this record which annoy you. you just have to find the way to clean it...
Same problem here, what I do was recover from a backup taken a day before the problem start. That solve it.
The problem start suddenly...
I try soft reset, turn the device off (remove the battery) and then turn it on again, also do the MemMaid 2.0 stuff with no positive results...
Sprite backup was my solution.
WM5 (factory rom, GPS enabled)
Default built-in clock, no alarm managers or any third party software.
Broken Alarm Clock
I have same problem on my Orange M700 (standard) and still do, even after a hard reset!? Excuse my possible lack of knowledge, but could this be just an issue with the registry? Or the original WM setup files?
Same problem on S300+. I don't want to make a hard reset.
Does anybody found a registry solution or something less violent ?
hmm.. maybe using alarm software ? that's helped me before.. instead performing HR of course..
I applied all of the stuff mentioned by royalbloodvi in another thread here:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
So anybody, that finds those tips useful enough for him, should go with those. My problem was, that even when I applied all of the stuff, phone was still laggy, had some SOD's, sometimes turned off by itself etc. Since there is still no official note from SE about MR2, I was desperately looking for an answer. Creation of X2 subforum made my search easier, after browsing some topics, I gathered all the info, and to make it easier for you, I exposed it in this topic.
All the credits go to the topic starters in here, once again, I just gathered and compiled the info:
Xperia X2: How to change language (re-flash an Stock Spanish ROM), dreamcrawler for translation and originating tips, gbajzelj for the final idea and ultrashot and lollylost100 that provided the X2 software cabs.
***********************************
Procedure:
1) Open SEUS (SonyEricsson Update Service), start a new update. EVEN IF IT SAYS YOU HAVE LATEST VERS, UPDATE IT ANYWAY.
Another version: click on Start/Settings/System/Clear phone memory, enter all the needed info. It will put phone back into original state (MR1 - since you updated your phone to that version)
2) ONCE IT REBOOTS, CALIBRATION SCREEN APPEARS. RIGHT AFTER CLICKING ON THE CROSSES, IT WILL APPEAR THE SONY ERICSSON LOGO, AND IT WILL START APPLYING THE CABS. PUSH THE RESET RIGHT after it starts applying (hidden behind the stilus, opening the battery cover).
3) After rebooting, the Sony Logo will appear again asking to retry. Press NO. Well by default this will keep on showing up every time you restart the phone, and it will also reset your time & date setting to some time in March. But I found a solution for that. With registry editor of your choice, search for Launch190 (HKLM\init\Launch190\CustAppInstaller.exe). Delete that value, and phone won't ask you again if you want to retry the CABS instalation, also it won't change your Time & Date setting again!!
IMPORTANT: After that, phone returns to original WIN 6.5.2 state, without BUGGY SE stuff. At that point, phone is usable, stable and fast. You will have about 220 MB of free space on your phone.
Now you can go further by installing some of the SE stuff, but this is all up to you, since I don't exactly know, which one causes the problems (except for SlideView and TileWave panel, as was stated in some other posts). Grab the X2 Program cab's here: R1BA023_Original_Cabs
Put the extracted cabs on your SD card, insert it into the phone, and install stuff you want. I installed those packages:
SEMCFlashDeployment.cab
SonyEricssonDialer_1.1.0.996_vulcan_generic.cab -> New Vulcan Dialer
TaskManagerSetup.cab -> Task Manager, obviously
Camera_R109_RC1_38986.cab -> necessary for Camera
CommManagerCab.cab -> Communication Manager
FastGPSSetup.cab -> without this GPS won't work, at least did not work in my case
JMMS_Ver4.5.113_26Feb10_SE_PPC.cab -> reminded by rsx19, this one is needed for MMS
After installation of those, restart the phone. At that point around 200 MB of storage space is left, and around 120 - 130 MB of ram left. Although, it is not necessary to install all of those cabs (except for Camera, which I think is needed, unless you don't want to use camera ), it is all up to you.
Also, since you requested, I'll put down some of the cabs that are needed for different settings. But keep in mind, I am not sure if anyone of those cabs make any troubles or instability. So If you find any trouble or instability after some cab was installed, let us know and together we might find some useful solution.
Ok, to install some of the aditional setting in Setting menu, first install MyCPLSetup.cab, as I discovered, this one is neccessary for following CABS for various settings:
MobileData.cab -> for mobile data settings (HSDPA, ..)
ClearStorage.cab -> installs Clean Phone Memory
PhoneSettings.cab -> updates the Phone in Settings/Personal
SetupSNM.cab -> installs new Sounds & Notifications under Settings/Personal..
For the Illumination to work, install those 2 cabs:
IlluminationSvc.cab
PatternsSetup.cab -> SE Illumination Patterns, don't forget to restart phone after you install those two, and go back to Sounds & Notifications to set the illumination for various events.
After you install those cabs (not necessary to install them all, it's up to you) restart the phone and options will show up in Settings or desired category.
Don't forget, when you finish with installation of cabs, do a restart / soft reset of the phone, since some changes may not show until a restart / soft reset is done!
Using the phone with Windows Default theme, it runs smooth. Also battery life so far seems to be improved, but will have to run it few more days to tell the difference.
So far, my phone is lightspeed fast and, which is more important - stable!! You can now also try to apply settings, royalbloodvi provided in this thread - maybe you get even better performance:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
Ok, some are still having problems with SD cards being unrecognized or disappearing, here is the patch: SD Card Fix
Accelerometer based rotation:
If you loose the rotation during the setup of CABS, and you still want to use it, this is how you turn it back on: with registry editor open (HKLM\Services\MultiService\mods\Rotation\AccelBasedRotationEnabled). If your rotation is gone, this key has the 0 value. Change it to 1 and you get your accel based rotation back. I have yet to find out, which cab disables it!
I'd like that you people give feedback in here, which CABs are safe and needed to install apart from those I (originally gbajzelj) posted.
PS
I personally don't like the idea of stripping the phone down to the bone to make it work. If you buy a new car, it works as it was send out of the factory..you don't need to unscrew half of the engine, disable the steering, take out the seets to make it work. Same is with computers, just everything. But until MR2 comes out and hopefully repairs all the damage that was done with MR1, this is the solution for me.
Also thanks to everyone helping to make this phone less bugy and somehow usable
lyteo said:
...
I also installed SPB Mobile Shell 3.5.3, which works flawlessly on this fresh install.
...
Click to expand...
Click to collapse
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
spasoft said:
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
Click to expand...
Click to collapse
Hm, I tried and my GPS was also unresponsive, so I installed FastGPS and it helped!
its gbajzelj not gbanzelj ) np.
When i installed spb 3.5.3 and reloded weather info then when i turned off the phone and turned it on again the weather data was not saved and the wireless or data conscction did connect but did not load no new data from weather server. Skyfire did load the pages (the connection i guess did work) but spb shell did not load the weather data anymore.
i would also like if anione can make the camera button to open the camera app withouth the slideview. maybe a simple cab file just to set the camera button.
Sorry for typo
Does it ask you every time you restart the phone if you want to continue with setup?
If it does, did you notice that it resets the date? Thats a problem I'm trying to solve now Every time my phone restarts, date is set to 17. March -> maybe thats why your weather data is not reloaded??
For me, when I press the Camera button it opens the CameraApp. I installed only Camera Cab as you sugested, no SlideView, and it works!
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
It think you have to install MobileData.cab & MyCPLSetup.cab
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
lyteo said:
Looking into your answer right now...remind me, in which menu that setting use to be, I forgot already...
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
Click to expand...
Click to collapse
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
royalbloodvi said:
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
Click to expand...
Click to collapse
About the Time & Date bug, I think every time the phone starts as after I made MR1 update...so we must somehow find what is telling the phone that the software is not installed (if we trick the phone that is was fully updated and will not ask for retry at startup, this date & time bug will probably go away) - solution found, check first post
About missing things in Settings, I think it is all connected with MyCPLSetup.cab solution found, check first post
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
rsx19 said:
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
Click to expand...
Click to collapse
You don't need to reinstall, just check the first post, I updated it with solution for that - you just have to change one registry setting!
For Sound & Notification settings install SetupSNM.cab! For the Optical I have yet to find out, I'm doing my best, but can't be that fast I guess I did about 10 reinstalls and about 100 restarts of the phone today
awesome, do you know which one is auto time update
rsx19 said:
awesome, do you know which one is auto time update
Click to expand...
Click to collapse
You mean the Timezone tab in Phone settings? When it automaticly changes time due to time zone change?
In this case it would be:
TimezoneSvcSetup.cab
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
rsx19 said:
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
Click to expand...
Click to collapse
Maybe you know where that Auto Time Update setting was? And if you restarted the phone, after installation?
For the Illumination, check first post
Thanks for the reminder on MMS, will add it now!
For the settingspart1 & 2, I have to check don't know yet
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
X2 phone Signal Pick up Weak
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
rsx19 said:
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
Click to expand...
Click to collapse
Did you went back to the Sounds & Notifications and selected vibration? Becouse at the moment, only cabs I have installed are:
MYCPLSetup, SetupSNM, IlluminatonSVC and PatternsSetup, and illumination & vibration works for me. Or do a soft reset again, it might help.
nguyennghiep said:
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
Click to expand...
Click to collapse
Hm, don't know what your are your signal conditions with other phones, mine has a good signal and it does not matter, what I install..
illuminations work and all the settings are set, but still no vibe.