Hi guys!
troubles over troubles with my qtek9100. Now that i almost solved the sofatware problems, my microphone doesn´t work any more.
Also, I´m not able to hear anything, when making calls. Funnily, i can hear the ringtone though. Any Solutions???
works again
straaangggee...
my mobile is on the table, suddenly performes a warmstart and everything works again (without me touching it!!!).
Does anybody experience the same???
cheers!
I had the same problem, my phone thought it still had the feadset plugged in. Try inserting the headset jackplug a few times it should fix the problem
I had the same problem, my phone thought it still had the feadset plugged in. Try inserting the headset jackplug a few times it should fix the problem
Related
Hey everyone,
I have imate jasjar, my microphone was working good till I completed last call 2 hours back, and suddenly person at other end wasnt able to hear voice, and I figured out my microphone stopped working.. I thought its a hardware problem.. but when I speak very close to microphone, person at other end can hear, but when I speak normally they cant.. earlier they could but now they cant.. and this happend suddenly between call, I did not do anything.. I tried enabling and disabling Microphone Gain Control but it doesnt help out, can anyone help me out? I did 2 times hard reset as well but no help
have you tried upgrading your radio?
I have a very similar problem with my Universal. Microphone and HP doesn't work. It's not a software problem, I tryed to flash different rom version, soft reset, hard reset. The phone works only with headset. I think it's a problem with jack connector detection. Even if no jack is plugged, i can't use button "Activate HP" during a call.
elmath said:
I have a very similar problem with my Universal. Microphone and HP doesn't work. It's not a software problem, I tryed to flash different rom version, soft reset, hard reset. The phone works only with headset. I think it's a problem with jack connector detection. Even if no jack is plugged, i can't use button "Activate HP" during a call.
Click to expand...
Click to collapse
This problem was highlighted before and its due to the design of the connector. Apparently the only way to over this is by plugging the phone in and out several times until the phone acknowledges that the headset has been removed.
Its because of this problem that I do not use the headset on my Exec.
So, my phone stopped working a few days ago. I've been running WM6 for quite some time now and I've even tried going back to Tmobile's ROM. Basically, when I receive/make a phone call, I can ONLY hear the person if I put them on speaker. They can hear me regardless, but I can't hear them. Pretty annoying.
Any ideas?
Heh! Quite a coincidence!!! I cannot hear anything from the headset either and it happened a short while after I upgraded to XDA6. It work fine with the stereo headset as well as with a BT one. The difference in my case is that I cannot switch to speakerphone. The phone is deaf without a hands-free device.
I have posted a separate thread on my problem - here it is
i have the same problem. phone is dead without a handsfree it happened to me last night all was good, i was listening to music to handsfree and removed them to make a call and it didnt work anymore..i reinstalled the rom, but no sound..any help anyone?
maybe the phone is stuck on handsfree..it things that the handsfree is plugged in or something?
problem solved trustworthy, i've put the jack in and out a few times..and now the sound works there is a switch that is pressed when you plug in the jack and maybe it got stuck on handsfree..try pressing it a few times..i don't know. now my phone works. i'll never plug in a handsfree again
I had the same problem--it was still under warranty...new MDA was the solution.
By the time it goes again I hope the next generation will be here!
I have the same problem as lilcam, the earspeaker is dead. I had the same problem once, and the service chage the speaker, first and the ringer, later and stars working just fine. Now, the silent speaker hits again and service says is not the same problem and they cant repar it. Does anybody have a clue?
Sisqo said:
problem solved trustworthy, i've put the jack in and out a few times..and now the sound works there is a switch that is pressed when you plug in the jack and maybe it got stuck on handsfree..try pressing it a few times..i don't know. now my phone works. i'll never plug in a handsfree again
Click to expand...
Click to collapse
Thanks for the hint, but I REPLACED the handfree jack and it still wouldn't work without the headset
The people, who got it serviced told me that there was a problem with the mmainboard, that they cannot deal with. As I've mentioned in my thread, they also told me that a faulty handsfree jack was a frequently occurring problem with the 9100. I would recommend to pdebeitia and Sisqo to try replacing the jack. Hopefully it might help...it did not work for me though...
BTW, pdebeitia and Sisqo, what ROM are your MDA's running or were runnig at the time when it happened?
Hello all
I have big problem with my himalaya. When someone calling to me or I calling to someone i can't hear anything and he can't hear me. But I can hear ring tone, mp3. I can hear someone and he can hear me when I connect my XDA 2 to computer.
What i can do with That??
the problem is with the connector.few Pins are broken or are touching each ither...which causes the Hima to go into Car Mode..try connecting a Headphone and see if it works or not..else get your Connector replaced
no audio
If the above doesn't work, this could be a problem, which after a LOT of research I don't believe there has been a fix found for. Essentially , my problem and a problem my mate had was that the audio on the phone was working FINE, MP3, ringtone etc... but upon answering or calling, there was no IN CALL sound. it WORKED with a headset, but no amount of fiddling with the jack sorted it out. THe LOUDSPEAKER also would NOT work.
Having a few donar phones lying about, I just put a new board into the phone and forgot about the problemed one for a week or so, left it laying in my drawer. Tried it in the phone after waiting this time, and it worked FINE.... the problem had rectified itself.
I know this isn't necessarily helpful, but perhaps leaving the phone in a dry warm place ? could be moisture..?
hope this helps.
..........IB a n e
well, it happend with me yesterday, just took the Batt. out ( 30 second), put it back, reset the device, and all will be OK,....its a software feature AND NOT A BUG... beleave it or NOT....
Salam
Hi all,
yesterday, the following parts of my Uni stopped working properly:
- speakers
- phone speaker
- microphone
Not only was there no sound at all coming from the speakers, but when I made a phone call, I couldn't hear the other person and neither did they hear me. The phone was thus rendered pretty much useless. I didn't try it when making calls, but when I turned on music, it played without problems when I plugged in the headphones.
Reseting didn't help so I reflashed the unit.
Everything was fine wor a while, but then the problem occured again.
This time, reseting the device solves the problem, but only for a few minutes - then the sound stops working again. EDIT: oh and now I also discovered that it starts working again at some times for no obvious reason and goes back to not working in a short while *CONFUSED*
Does anyone have an idea what it could be caused by and how to solve it? Many thanks!
I had a similar problem earlier.Try putting ur headphone jack in and out a few times,this generally sorts out the problem.It has to do with a small pin in the headphone socket which diverts the sound to the headset when it is plugged in and the pin has to come back in position when the headset is disconnected.What happens is that the pin gets stuck,so even when u disconnect the headset,it still diverts the sound to headset mode.PM me for more details
Longlife said:
Hi all,
yesterday, the following parts of my Uni stopped working properly:
- speakers
- phone speaker
- microphone
Not only was there no sound at all coming from the speakers, but when I made a phone call, I couldn't hear the other person and neither did they hear me. The phone was thus rendered pretty much useless. I didn't try it when making calls, but when I turned on music, it played without problems when I plugged in the headphones.
Reseting didn't help so I reflashed the unit.
Everything was fine wor a while, but then the problem occured again.
This time, reseting the device solves the problem, but only for a few minutes - then the sound stops working again. EDIT: oh and now I also discovered that it starts working again at some times for no obvious reason and goes back to not working in a short while *CONFUSED*
Does anyone have an idea what it could be caused by and how to solve it? Many thanks!
Click to expand...
Click to collapse
try it with bluetooth, if all sounds work fine, then problem is with the receptacle for the headset jack.
Had this problem myself. Took phone apart and repaired.
GL
Thanks, I guess the problem really was in the headset/external switch. It acted like crazy, switching back and forth for no reason, but when I tapped the headphone jack hard with my finger, it usually got ok.
And for the past few hours, the sound worked perfectly, so it hopefully is ok again now. If the problem comes back, I guess I will take it to the service center and get it repaired - I don't think I'd have the courage to do it myself
Anyway, thanks a lot for your help guys.
Hi!
I have a problem. Recently I 've installed new rom (touch-it 4.0)on my xperia. Everything was fine but when I plugged my phone to hi-fi, I started having problems.After i unplugged the phone the headphone icon was still on the display bar. I've tried to switch off the phone or even remove the battery but the problem still exist.I am not able to even make a call, without my headset, cause phone still acting like sth was plugged to the mini jack.
Please, do anybody know a solution to this case???
best regards,
Karol
Same...
I've got the same problem. I didn't install any Mod Roms, but Ive heard it could be a hardware problem. All the suggetions didn't work... like unplugg it when you just started a call...
My main problem is that it doesn't play any sounds anymore... Coreplayer says: "Wave Output: Device error!"
Maybe its because i've installed WOW-HD Sound app...
Shouldn't have done so... I guess..
But the headset problem still exists besides the sound prob, cause ive read a lot of stories about exactly this bug...
It's the same at my phone: The headset symbol doesn't disappear when you unplug your headset...
I think i got the worst case: My sound doesnt work so i even cant make calls with the headset... means, left for me is sms and Internet...
Thats why I bought a mobile phone
having thesame icon on my phone too cant hear nothing when receiving a call not ontill i slip in my headphone but my ringer works good thats the reason its amazing that i can hear my ring tone when am been called but cant hear nothing when accepting a call ,till i slip i my head phone,anyone got a solution? try let us know, thanks in advance