Related
Maybe this a silly idea but I was wondering if it would be possible to simply redirect the sound going to the speaker, when we play MP3, to go to the bluetooth headset by adjusting a parameter in the registry.
Let me explain my rationale. I recently installed a bluetooth toggle on my pc and paired it to my Jabra 258. I started the media player and was expecting mono sounds to come out of my earpiece. Of course nothing happened until I went to the options in the media player to send the sound to my bluetooth device instead of the sound card and voila I got sound.
Now of course no such option exists on the mobile media player but perhaps there is a registry setting that can be adjusted to send to the bluetooth instead of using the internal speaker.
I realise that this would be then hard coded and to play back to the speaker would mean adjusting the parameter in the registry but its better than nothing. I also realise that it would not solve our headset issue but having read through all the forums with regards to widcomm, bluesoil etc the embedded BT stack still has not been overcome.
I also undertsand the need for an audio gateway stack but from a laymans point of view it does sound simple.
I love my O2 XDA II mini that has been transformed into QTEK, I-Mate and then Anasky and half the fun is playing with the rom and the machine to get the best out of it. I don't really care much for WM 2005 but if some bluetooth issues can be resolved then its the perfect machine for me (apart from the camera).
Heres Hoping
Best regards to all and keep up the good work
Hey, humans!
After searching through the forums for a couple of days, I thought I would go ahead and post to ask if anyone has a fix for the following problem...
I recently purchased the Jabra BT 620s stereo Bluetooth headphones, tapped the A2DP cabs, and got wireless stereo working (along with all of the buttons and the mic) right away.
Unfortunately, every time I turn off the headphones and reconnect them, they connect to the phone as "Hands-Free" only. In this state, I can use the answer/call/play/pause/etc. buttons and the mic, but audio is delivered through the 8125's speakers and not the headset. To fix it, I have to open the BT settings, click on the Jabra phones, Refresh (because it still says that the set is connected as "Hands-Free" and "Wireless Stereo"), and reactivate "Wireless Stereo" every time I want to listen to music.
Is there any trick/registry tweak that could help me bypass this extra step? Oh, and does anyone know of a media player that doesn't hog my resources like WMP, uses AVRCP, and can play streams?
Thanks in advance!
In response to my own (2nd) question...I've read that TCPMP respondes to AVRCP commands.
Does anyone know how to get them to work with the Jabra BT 620s headphones?
I'm continuing to look for a solution to my problem and find an alternative to WMP10, which sucks up so much memory.
I have finally managed to get Pocket Player 2.72 (http://www.conduits.com/products/player/download.asp) working with AVRCP. Although it is supposed to work right out of the box, I tried using it and received no feedback from the Jabra BT 620s's buttons.
While looking for a WMP today plugin -- one that I had hoped would have a smaller footprint while still allowing AVRCP controls to function -- I came across a post and eventually found a .dll for Pocket Player that allows me to use my Jabra's controls to influence the player.
Unfortunately, Pocket Player is a woefully bad player (even worse than WMP10 in my opinion!) and I can't get much use out of it because it “skips” constantly and forces the screen back on (it doesn't automatically shut off again) with every command from the headphones. However, for everyone who prefers PP and can't get Bluetooth to work through it, trying downloading this rar file (http://www.modaco.com/index.php?act=Attach&type=post&id=19163), unrar'ing it, and placing the enclosed .dll in your Pocket Player directory.
I personally really like pocket player, but you need to wait for v2.73 out soon apparently. If you go to conduits forum you can see alot of info on this issue.
I find it plays beautifully thru iTech Clip R35 (I admit I have a different device ie jamin).
But to your first point, I still have that problem as well, I have to manually switch on the bluetooth stereo option, I haven't found a solution for that yet.
cheers
groverbot said:
Hey, humans!
After searching through the forums for a couple of days, I thought I would go ahead and post to ask if anyone has a fix for the following problem...
I recently purchased the Jabra BT 620s stereo Bluetooth headphones, tapped the A2DP cabs, and got wireless stereo working (along with all of the buttons and the mic) right away.
Unfortunately, every time I turn off the headphones and reconnect them, they connect to the phone as "Hands-Free" only. In this state, I can use the answer/call/play/pause/etc. buttons and the mic, but audio is delivered through the 8125's speakers and not the headset. To fix it, I have to open the BT settings, click on the Jabra phones, Refresh (because it still says that the set is connected as "Hands-Free" and "Wireless Stereo"), and reactivate "Wireless Stereo" every time I want to listen to music.
Is there any trick/registry tweak that could help me bypass this extra step? Oh, and does anyone know of a media player that doesn't hog my resources like WMP, uses AVRCP, and can play streams?
Thanks in advance!
Click to expand...
Click to collapse
Hi, I just bought the BT-620s and have exactly the same problem you have mentioned, otherwise a great BT headset.
Did you ever manage to find a fix for this problem?
Using the M3100 with the itech clip S35 Headset
firstly i've been using the fit4cat tweaker which has an A2DP quality improvememt tweak - unfortunately the tweak makes the quality worse so i've tuned it off and the music quality is not too bad when playing through my car stereo. However, I need to try some decent headphnes with the unit because the ones supplied sound very tinny!
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Thirdly, I have the S35 outputting through my car stereo. When people are calling me they can hear an echo (of themselves speaking as the sound comes out through the car speakers). There is some sort of delay i suppose but this is very annoying. I'm not sure why its happening because when I tried the headset using my Sony Ericsson W800i there was no such echo!
therfore, is the echo problem an A2DP thing (as the w800i does not support it and this works ok) or is it a m3100 thing? To test this I could turn off A2DP and ry the headset again - is this possible?
any suggestions appreciated
I have the Jabra BT620s headphones and I have indentical problems.
After install all works well but as soon as you disconnect media player just plays via the phone speaker
at least you guys get it to work once. WMP never plays through my iPAQ bluetooth headset. AVRCP controls work fine though. TCPMP plays fine through the bluetooth headset as long as I pair it up before I execute TCPMP. This is exactly how it worked with my 8125.
The WMP issue is very strange and is likely yet another example of the lack of QA testing in the A2DP portion of the TyTN's implementation. I would expect that these issues will all be fixed in a subsequent TyTN ROM update.
I'm getting on ok with this
quality is pretty good both using the headset with my own sony ear buds. Vast improvement over the itech supplied ear buds.
A2DP - no skipping during normal playback and it works well - quality is not an issue through the car stereo either - not bad at all . I've even been listening to music over A2DP and running sat nav using a GPS BT receiver. A slight pause in music when GPS connects but then all runs well.
My only 2 gripes are:-
1. When you disconnect or go out of range of the headset, it reconnect perfectly with the phone application. This isn't the case with the wireless stereo. I have to enter BT settings, uncheck the wireless stereo setting, save then recheck the setting before it reconnects. Slightly annoying but accesptable (for now)
2. the echo using the headset through my car stereo. People calling me can hear themselves again (about a 0.5 second delay) through the car speakers! Just to repeat my earlier post, this does not happen with my W800i. not sure if its an A2DP problem or something else.
Similarly here, I don't seem to be able to make A2DP (and the handsfree profile, for that matter) work.
Using HTC and an Itech clip, I am able to pair the "wireless stereo" and then play music for some 10 seconds on the GS Player, after which the Wireless Stereo symbol disappears from the top bar and the connection is interrupted. I actually believe that the Itech clip is 'shut off', as I have to turn it on again.
When I try to reconnect the headset, it just won't work and the whole machine is slowed down. Only a soft reset helps.
I hope this is a ROM problem (and not mine) and it'll be fixed soon...
WMP and the Itech clip work fine for me, with the current German ROM.
a2dp issues w/th Hermes
With the CHT9000 WWE rom I had the wireless stereo drop off after about 1 minute, then I would have to reconnect. I flashed to the other dopod WWE ROM (latest) and the problem is gone....sound is comparable to my prophet. Reg tweaks suggested in other forums definetely make the sound quality worse for either ROM version. I think further updated ROM's will improve A2DP reliability (or someone may find a reg hack)...as with the prophet A2DP it just takes time.
Hi guys, I've got the vario ii and the Sony Ericsson HBH-610.
I can add the headset fine and make calls through it, but I don't know how to get the music in wmp to play through it.
If anyone has a few mins spare and could explain it for me I would be really grateful
Headsets..HBH 610...
With my CHT 9000 I use an OMIZ 5660...works great for calls and wireless stereo. I don't have any other headset to compare it to (since I only have used this brand)....I believe that if your "options" do not list wireless stereo then you can't use the A2DP function on your device, at least as it is designed to be used.
I'm not aware of a one-piece headset that supports A2DP that is available (all should have either 2 headphones or two wired ear plugs)..
THE ONLY WAY, I FIND :
I have a 590A Plantronics Bluetooth HeadSet
You must refresh Services of your iTech or your Plantronics !
Go Parameters, Bluetooth, Select your Headset, Refresh.
Then reselect services and Save !
Each time you lost the link (Bluetooth turn off or ...) you will have to Refresh,reselect and Save !
I am searching for a Solve but not find another !
I forget something else !
It is the same thing with my Bluetooth GPS (GNS).
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
So far A2DP has worked fine for me with my Nokia HS-12W. I have applied some registry settings and optimised my SD card and so far it has played with hardly a skip. Definitely better than my previous BA with WM5.
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
hutton118 said:
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
Click to expand...
Click to collapse
This is probably headset dependent because with my Nokia HS-12W if i need to reconnect i just press the Audio button and it re-establishes the A2DP connection. No going to BT settings at all.
Interesting, can you just confirm what you mean by the Audio button. Is that just hitting 'Play' in WMP?
Thanks
No, the Nokia has a Music key (not Audio, my mistake) which switches from A2DP to the built-in radio. So if i have lost the BT connection pushing the Music key to select the Audio player will re-establish the connection and music is streamed to the headset. You will see the A2DP icon on the today screen when it has connected and get the chime in the headset.
Ok, thanks for that.
Just one last point, if the connection is lost while music is streaming, does the audio switch to the phone speaker instead??
My problem is I'll be listening to music on the subway then or some reason I'll loose the connection (interferance, low battery...whatever) and immediately music starts coming out the speaker, much to my embarrassment!
Thanks again!
Hi,
I've got a 3xx series Plantronics headset and i've got a question about using it for more than JUST calls.
Can I use it for watching movies?? at the moment, when the movie plays, it automatically goes to loudspeaker, even whilst paired.
I know of something called A2DP, but I'm not sure that my BT headset is that... Can I install something or change some setting to make the music/movie play through my present headset??
Thanks!!
A2dp is a stereo profile, should be active if you have a stereo headset and are listening to anything stereo on the phone. I've been having trouble getting A2DP to stay active on my phone as well, but I just read about a program called A2DP Toggle found Here seems to be working for me tho I'm not sure its what your looking for.
Well I don't own a stereo BT headset. Just a normal one-ear one.
I want to know if there is a way to port the movie/music sounds through it.
So I think its a bit different to your case. Anyone else?? Thanks
btw, I've used a simple bluetooth headset with my PC before and it ported all the sounds from the PC to my earpiece... so technically it should be the same case for phone? I hope there's a way...
http://forum.xda-developers.com/showthread.php?t=248774
Thanks jonasd,
It seems like its an old thread - any newer applications that are similar?
Does the toggle application for for your X1??
Hi! This issue has plagued me ever since i am using windows mobile. I own a TOUCH HD (though i think this issue is also with other windows mobiles) and a A2DP Stereo bluetooth headset from Sony.
http://images.google.nl/imgres?imgu...ox-a&rls=org.mozilla:en-US:official&sa=N&um=1
Now here's the problem. When I pair the phone with the Headset, it pairs the 2 services HANDSFREE & WIRELESS STEREO. Then i can listen to music via the headset.
When i turn the headset off and then back on again, it switches on the HANDSFREE ONLY !! And i have to go thru the following process to turn on the WIRELESS STEREO again:
1. on phone, click on Bluetooth Devices
2. select the headset device to view the 2 services (handsfree and wirless stereo). Both are selected. Deselect the Wireless Stereo service.
3. SAVE
4. on phone, click on Bluetooth Devices
5. select the headset device to view the 2 services (handsfree and wirless stereo). Re-select the Wireless Stereo service.
6. SAVE
Then it works again and i can listen to my music again.
Its a very annoying process and I wish someone could help me to explain if there is a faster way? Does everyone also have to go thru this process or am i doing something wrong?
Does there exist a program that can automate this process or any other solution?
looking forward to replies!
there are more than one small app to make it easy.i found one that works on my HD. uploaded for you here:
http://rapidshare.com/files/207816065/13-BTaudioTransfer.cab
next time try and do a search....
thanks a lot! It actually works! cant imagine why microsoft creates an OS without this built in as standard !
thanks.
ronald_adi said:
Hi! This issue has plagued me ever since i am using windows mobile. I own a TOUCH HD (though i think this issue is also with other windows mobiles) and a A2DP Stereo bluetooth headset from Sony.
http://images.google.nl/imgres?imgu...ox-a&rls=org.mozilla:en-US:official&sa=N&um=1
Now here's the problem. When I pair the phone with the Headset, it pairs the 2 services HANDSFREE & WIRELESS STEREO. Then i can listen to music via the headset.
When i turn the headset off and then back on again, it switches on the HANDSFREE ONLY !! And i have to go thru the following process to turn on the WIRELESS STEREO again:
1. on phone, click on Bluetooth Devices
2. select the headset device to view the 2 services (handsfree and wirless stereo). Both are selected. Deselect the Wireless Stereo service.
3. SAVE
4. on phone, click on Bluetooth Devices
5. select the headset device to view the 2 services (handsfree and wirless stereo). Re-select the Wireless Stereo service.
6. SAVE
Then it works again and i can listen to my music again.
Its a very annoying process and I wish someone could help me to explain if there is a faster way? Does everyone also have to go thru this process or am i doing something wrong?
Does there exist a program that can automate this process or any other solution?
looking forward to replies!
Click to expand...
Click to collapse
I have a same problem with my car audio, but when i install this BT program in lower post they connect me only to handsfreee, and when i go to play music they disconnected my car BT audio.
Just for you interest - this does NOT make A2DP work.
Mirror site please!!!
KukurikU said:
there are more than one small app to make it easy.i found one that works on my HD. uploaded for you here:
http://rapidshare.com/files/207816065/13-BTaudioTransfer.cab
next time try and do a search....
Click to expand...
Click to collapse
Can someone please mirror this download, my limit is up on.
Here is the source.
I got it downloaded, and here is the developers web site
http://trianglepowers.com/PPC
(sorry all, could not find an edit for my last post)
Pair your stereo headset and select the Heaset and Wireless Stereo profiles, this will work from start.
Next time you turn on your stereo headset it will only connect as standard headset (ie mono for phone calls)....
Just press the play/pause button on your headset and it will auto connect to A2DP stereo also.
Simple EH?
Tried that!
I have tried that, and do it on my laptop (another set and stereo profile only), it may be dependent on the headset you are using.
The Triangle Powers BT Stereo is mono output only, and made the audio quality poor on my HD. http://trianglepowers.com/PPC/ViewApp.aspx?ID=52
I installed teksoft A2DP Toggle 1.1 this morning http://teksoftco.com/forum/viewtopic.php?t=1885 and added it to the program button in TouchFlo, not the today screen. it seems to work fine if you press the button twice, better than 7 clicks. (My HD info in the signature, Telstra TouchFlo replaced by Standard HD)
GSamways said:
I got it downloaded, and here is the developers web site
http://trianglepowers.com/PPC
(sorry all, could not find an edit for my last post)
Click to expand...
Click to collapse
Looks like promising software, I will play with it and update in few days with pros and cons
GSamways said:
I have tried that, and do it on my laptop (another set and stereo profile only), it may be dependent on the headset you are using.
Click to expand...
Click to collapse
If pushing the Play/Pause does not connect a previously paired BT Stereo Headset to your HD then it is not a true A2DP profile headset.
See if you can get your hands on a pair of folding Sony DR-BT22 headphones.
True A2DP with built in mike to answer incoming calls. Bass is very good and full funtion with the HD.
Highly recommended.
ronald_adi said:
Hi! This issue has plagued me ever since i am using windows mobile. I own a TOUCH HD (though i think this issue is also with other windows mobiles) and a A2DP Stereo bluetooth headset from Sony.
Click to expand...
Click to collapse
ronald_adi said:
Hmm! I pair the HD with a great bluetooth headphones from Sony I got in Tokyo recently (not the same as yours). I dont have any problem with the A2DP connection at all. I have perfect high audio definition thru to the headset.
Sorry not much help-but it may be the headset not the HD thats your problem!
Click to expand...
Click to collapse
Agree
You guys are correct, the smaller headsets that try to share the Play/Answer/end button are probably the issue.
I have been using A2Dp Toggle 1.1 as mentioned and link above and it works great, no loss of sound noticed.
We should start an XDA (not just HTC) WiKi to list headsets that connect or not for WM5 and WM6.
HD Compatible Headphone
I have a Sony DR-BT50 headphone that works beautifully. The sound is brilliant for Music and particuarly movies that I have transferred from DVD to the HD with MP4HT4HD!
I never thought that i would watch a movie on a screen so small but the clarity is something else and the high audio signal with the bluetooth headphones make it a pleasure! Great for long layovers at airports etc.
Any in-ear types that work?
All the sets that I have seen posted as working are the full headphone (over ear) types, and this may again be a shared button thing.
Does anyone have / know of an in-ear / earbud type that works / connects correctly
A2DP Toggle 1.1
I dowmloade that A2DP Toggle 1.1 on my phone. I use HTC TYTN1 running Windows Mobile 6 Professional and this software gives hell to say the least.
When I connect it to my headset, it works fine BUT it does not pay MP3s on my headset. It keeps on saying ERR on the icon of the head speakers (the second icon form bluetooth icon). I even asked most of the technician but no one knows anythings. If anyone knows what my probles is, please rescue me!!!
I might be doing something, please help me guys
Toggle works for me!
I had the same problem, the triangle powers prog didn't work for me. In fact the headset icon was on but no playback.
The toggle 1.1 works, none of the funcitons described on it's website are available, setup and various icons are from the home page but HTC Touch HD home page doesn't support that.
Never the less, putting Toggle in my program list and using it toggles easy between phone speaker and headset. Like someone has already said, two clicks and we're in business from starting my van to getting music from my phone on the stereo. I'm happy enough with that.
I have a Pioneer stereo with Parat built in, so I get BT audio and Hands free calls. All seems to be working perfectly now. Thanks to this thread.