I have the O2 XDA EXEC and just done the the upgrade sucessfully.
I was now trying to install the extra software clearview PDF.
Disaster struck me down, as i was installing it the installation got stuck at the end for a good few minutes so i decided to disconnect and reinstall it.
After a soft reset the the XDA will no longer go past the first splash screen which also displays all the rom details.
I have tried to reinstall the fresh ROM agian and again but the PC will not recognise the USB device.
PLEASE HELP AS I AM REALLY STARTING TO PANIC
errr....you got xda exec????
emm....exec is under universal...not alpine....anyway...which rom you use when upgrading ???
sayekm said:
I have the O2 XDA EXEC and just done the the upgrade sucessfully.
I was now trying to install the extra software clearview PDF.
Disaster struck me down, as i was installing it the installation got stuck at the end for a good few minutes so i decided to disconnect and reinstall it.
After a soft reset the the XDA will no longer go past the first splash screen which also displays all the rom details.
I have tried to reinstall the fresh ROM agian and again but the PC will not recognise the USB device.
PLEASE HELP AS I AM REALLY STARTING TO PANIC
Click to expand...
Click to collapse
restart your pc and connect to your exec , try to flush rom agian , you should be ok
Hi Friends,
My new mobile phone SPV M600 got stuck whil starting showing four lines of messages as shown below.
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 2.10.1.22
Can any one please help me in geting my phone to today's screen.
I also attached the screen shot for reference.
did you try a hard reset ?
Ya I tried both hard as well as soft reset but same screen is stuck again and agian.Can any one please help me in this regard as I am very new to PDA family.
Ok, first things first:
Since you are new to this, are you sure you preformed a hard reset?
It is done by holding power + camera + comm manager buttons (one on the right, two on the left) and pressing with stylus in the reset hole at the same time.
A message should appear asking you to press 'send' (green phone button) to confirm reset.
If this does not help, you may have a serious problem.
Please answer the following:
Is the device fully charged?
Phone will fail to boot if the battery is too low.
Did you install any software right before this happened?
This should have been resolved by hard reset, but just in case I am asking.
Did you change the ROM, attempted CID / SIM unlock?
This could require more serious measures than I can advise on.
I did exactly the same thing which you mentioned.But even then it is stuck at the same screen.
Ya u r right I unlocked my mobile using a software from eBay.The unlock was successfull and I tried to insert T-Mobile sim, it also captured the signal and I was able to make and recieve calls then after that I wantedly switched off the phone and then tried to start it, there got the problem.
Can any one help me in this regard please.
I am having the same problem, but my phone is not sim-locked.
I've got the same problem after attempting smart1_wm6_pp8mb.exe
I'm having the same problem with my G4 QTEK S200:
Attempted to upgrade to WM6 Rom using smart1_wm6_pp8mb.exe
After reboot the phone got stuck at the QTEK Screen
Tried Hard Reset (Camera+Power+Comm+Reset) followed the steps with the same results (bricked)
I also tried re-flashing the rom back to the factory one using RUU_Prophet_220734_2207114_024721_QtekWWE_Ship and ROMUpdateUtility-NoVendorID.exe in Windows Vista with WMDC (Windows Mobile Device Center v. 6.0.6873) and the phone in boot loader mode (tri color screen) with working USB cable, with windows firewall disabled and symantec AV disabled as well, RUU keeps saying error 260 "the update utilitiy cannot connect to your pda phone..." .
Do you think I should try this process using XP instead? No matter what i try i keep getting the error 260
Any help would be greatly appreciated
Got it fixed!
it was definately a Vista issue. once i tried it in XP with ActiveSync it worked like a charm and i got my phone back up and running. also used spb backup and restored all my settings.
ipl/spl screen
i got the same problem with new rom wm6, and the 260 eror, my problem is that i have xp and the activesync does`t connect ...
... means i cant redo the original rom ????
PLEAAASEEE HELPPPP !!
Again My phone SPV M600 got stuck at IPL/SPL screen
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
yekanth said:
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
Click to expand...
Click to collapse
A rom reinstall on xp solved my problems on that one. retry a couple of times! It may not work the first time! hard reset as well...
Try an official wm5 rom just in case
good luck
Can you please gimme step by step procedure
HI Phil,
I am new to these kind of installations . CAn you please Gimme step by step procedure for ROM installation.
mine is now also stuck, after trying to install new rom. wont connect to active sync either, have i fooked it? tried hard reset etc.
thanks
(with a turned off phone, press and hold camera button then insert USB cable)
then flash provider ROM
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
Click to expand...
Click to collapse
from here http://forum.xda-developers.com/showthread.php?t=310452
hi jay
i seen your post in n00b guys one, i fixed it!!!!, thank you so much, i couldnt remember how to get it to those 3 colours.
thanks again
Colin
Hi Iam unable to get the NVID ROM
Hi,
I am unable to get the NVID ROM. The Rapidshare link that has been provided in the other thread is not working. Can some one tell where can i get the ROM.
collywog19 said:
i seen your post ...
Click to expand...
Click to collapse
no problem mate.
..and yekanth i see what u mean about the dead links. i have the files on my computer at home but i'm posting from my prophet right now, so i can't upload. Try using the "pdaviet temp" from one of the wm6 threads?
(http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip)
Hi Iam able to update the Rom but no use
Hi,
To mention my phone is from orange-UK. I got the orange rom from our FTP site and did the flashing/update what ever you say.But still it is getting stuck at the same IPL/SPL screen. Iam very much worried that I will not get a proper solution for my problem.It will be very grate full if some one resolve my problem.
just seems strange...how did you fix it last time? did it just start working again? A random guess would be that the camera button got liquid spilled on it or is stuck in.
If the camera button is pressed in the phone will go to 3 colour screen every time it is turned on.
It won't do any harm if you try to press/move that button to see if u can "unstick" it, not likely I think but u never know...
Hi,
I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen) so i made a hard reset and it was working.as i didn't want to keep orange OS i tried to flash it.
As a newbie, i tried to flash it with a HTC Rom without unlocking the CID. and..... didn't work !
Retry : updater says no system at all was installed on the phone then, it had passed by and installed the rom (don't know why)
yap, installed but didn't work! still blocked on splash screen sometimes go on WM6 welcome screen and one time accessed the Windows Mobile.
And one hour later.... black screen !
So, i tried to reflash it in bootloader mode with the original orange ROM, it worked, but still blocked on the orange splash screen and the OS version written on this screen was 1.84.0.0 (it should be 1.84.73.2) and screen was brightening so reflash a second time with that original rom, error 276: update error. Now everytime i start the phone, it is in bootloader mode with RUU written on it (in update process i suppose) and everytime i retry to update, error 276: update error. then tried with SD card: card no recognized and still blocked on the bootloader mode update process.
So,
- is there a way to update or flash the bootloader ?
- has my phone his hardware totally crashed
(because i think orange won't never accept warranty, even in normal way they only accept it when you are dying front of their door, and its not sure if they could kill you just for pleasure they'll do)
OK I am stuck at the screen showing IPL SPL GSM and OS.
I was wanting to change the ROM so I used Resco backup and made a full backup.
Then I flashed back the original Rom for my Cingular 8125 / HTZ Wizard
Then I flashed to HTC Business Edition ROM CE OS 5.2.1622 Build 18128 AKU 4.4 http://forum.xda-developers.com/showthread.php?t=376667
Then ran my restore but since I forgot to put in my name and other personal info it said some stuff couldnt be restored so I Put in all my info and then did the restore again and it said it was complete and needed to soft reset so I said ok and now Im stuck at the boot screen like I said.
Since Im at this spot active sync wont connect and I cant reflash that way.
any help or ideas would be appreciated.
Cheers,
Chris
I am sort of in the same boat, got the wizard flash with buttons image, but now it won't connect via activesync, hopefully we will both get an answer.
cholubaz,
I got my problem solved by ....
1) doing a hard reset on my phone
2) un-installing active sync AND deleting the active sync folder then re-installing a fresh copy
I wanted to pull what little hair out that I have left, but it all came out good.
I fixed mine too just a few min ago
Mine wouldnt even hard reset. Holding the Power button down did nothing no matter how long I held it down.
I took the battery out and put it back in after a few min to a few hours and still it would only boot to the same screen I mentioned.
What I found out was that if I held the camera button in and then turned on the phone I was able to get in to boot loader mode and then I was able to reflash to a new ROM.
So Im back in business now
Cheers,
Chris
Recently I have updated the March update of Windows Phone and the process have stucked in 8 of 10 and the Zune have closed incorrectly and my Trophy have turn off and now I can't start it anymore. I press the power button and nothing happend.
Any help?
Thanks in advance.
any tips please?
Same problem, what did you do?
I wasn't able to start it anymore. any tips you guys?
Zune has made a backup of your system. go into the settings to restore
I have the same problem. I just updated my HTC Trophy to the latest version of from 4. January 2012 (v7.10.8107.79).
Before I updated my phone I had the version 7.10.7740.16 from 17. Nov. 2011.
No hacks, no jailbreak or anything else. It was just offical developer unlocked.
So, I started the update and it after the reboot on step 9 of 10 it started vibrating 7 times in a row. After that it was just hanging on the HTC logo boot screen. After an hour or so I disconnected the phone and removed the battery. When I start the phone I got always those 7 short virations and it hangs on the logo screen.
I tried the hard reset as well without success.
Does anybody have an idea what I can do with my phone?
BTW: I made the update with my MacBook Pro but with a nativ windows installation on it.
Thanks in advanced.
What carrier is your Trophy on? You should attempt to flash the stock rom back onto it.
It's a Swisscom branded phone from Switzerland. But I use it atm anyway just as a test device without a SIM card.
How can I do that to flash the stock ROM on my phone? Do you have a link where I can get some instrutctions?
Thanks
EDIT:
I found this thread, I will try this to solve my problem. I'll let you know if it works.
http://forum.xda-developers.com/showthread.php?t=1257986
You can also forgo trying to use that method and use the HSPL process to try a rom like DFT Freedom. It will let you do a lot of neat things a stock rom cannot do (like run Opera).
You would then download HTC Connection Setup and change the carrier settings to your carrier (so you would recieve SMS, etc).