Let's start a thread of all the reg tweaks ppl have come up with. If they are saved as .reg files (to an SD), we can install them with a mere double-click by using TRE (options>associate), and anyone can contribute to this post WITHOUT having to build .cab files! Why is this kewl; cos when u hard reset it's a real ball-ache to go back into all the forums to find the tweaks u applied and to navigate thro TRE to re-apply them all. This applies particuarly to settings (Owner info etc). Over and above, we are no longer beholden to tweak shareware, but have full and instant control over our settings.
Each tweak should have 2 reg files; Apply the tweak, and remove the tweak (if possible). In this manner, we can have a directory of reg files, and can turn on and off tweaks with a simple d.click.
Attached is a basic set I've compiled. Please let everyone know if any are a problem (ie perhaps whole key gets replaced and overrides something u have already changed). Files described below:
[*]Reg Date_In_Titlebar ON.reg
Adds the date to the title bar, with format according to your short-date format under settiings>regional (or found manually changed in another Tweak I'll cover later). I do NOT have a .reg file that will undo (ie delete) this new key, but it's easy to see what key is being added so u can delete it. <Credit: Well known PPC tweak - I probably learnt from toenailed>
Can someone please find out where we can change the font for this - it's a horrible bold font that doesn't fit in the space available?
[*]Reg Font_Menu_+_Pop_700 ON.reg
Change menus and popups to a smaller font. Nice size, makes VGA look more VGA-like, yet not so small that it fails cleartype nor looks daft. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_Menu_+_Pop_900 DEFAULT.reg
Reset above change to default of 900
[*]Reg Font_System_700 ON.reg
Changes system font to 2 pts smaller. I find that dialog boxes with radio buttons got a bit wierd, and you don;t get much more screen estate height cos of icon sizes staying the same in file lists, so I don't bother with this tweak. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_System_900 DEFAULT.reg
Turn above off
[*]Reg GPRS_+_3G_Always _On DEFAULT.reg
Awesome tweak to make sure ur phone connects to GPRS/3G and stays there. However, you'll want to switch this off overnight etc, which is the main reason I created this post and these reg files. NOTE: you will absolutely HAVE to replace the "MTN SA Web" bit with the name of your connection which you will find in this key using TRE
<Credit: BrettS http://forum.xda-developers.com/viewtopic.php?t=30277>
[*]Reg GPRS_+_3G_Always _On ON.reg
Turn off the above. Remember to change connection name in file
[*]Reg PIE_Homepage_Default.reg
When u press the E (explorer) keyboard key u go to clubimate homepage - annoying. This resets that hard button to whatever u want (current reg file is windows\default.htm)
<Credit: I forget, someone on clubimate forums>
[*]Reg TerminalServices_Cache_Larger DEFAULT.reg
AWESOME improvement in Terminal Services client horrible black blocks. Increases cache sizez - I did not notice an increase in traffic/cost
<Credit: Carnivor from MS KB http://forum.xda-developers.com/viewtopic.php?t=29996>
[*]Reg TerminalServices_Cache_Larger ON.reg
Turns above off
More coming as I go thro the wiki and toenailed tweak posts and extract usefull ones for us lonely Universal users...
can you add the actual keys to here?
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
cos of this thread
http://forum.xda-developers.com/viewtopic.php?t=30396
Doh! That post came up after I started this thread.
Still this thread is useful for the actual .reg files to same n00bies some time (and to save me time too). I'll make sure everything here is duplicated there tho.
Here are a few more .reg files:
Several versions of date_in_title_bar (covered above)
Hide_Screen_Rotation icon
Hide that icon that allows u to rotate screen - but JJ does it automatically so Icon is not so necessary
Regional_settings
These are for me - u should edit file in text editor to customise 4 yourself. Best part is my short date format that keeps date in title bar small and visible
Ringtone_settings
Customise as above
Screen_Speed_Glyph_Cache
Double your screen cache. COsts a LITTLE memory, and improves screen size
Screen_font_'smaller'
Set screen font size to "smaller". This can be changed in "settings"m and I only include it here in line with my suggestion that we have a collection of files to run quickly on reset. You may want to customise as above
SIP_Settings. Ditto
All in updated zip file.
I would really appreciate if anyone can find a way to get rid of the Last Call in the dialer screen... I know its somewhere hidden in Registry, but I dont seems to be finding a way to get tru it...
Having the Last Dialed No. showing rite up on the Dialer Screen is really bothering and if you happened to press the phone button by mistake twice there we go the last dialed no. has been dialed already for you....
Bump: no-one contributing to this learning?
haven't found anything else worth posting yet m8, u got the best ones already :wink:
craigiecraigie4: Thanks for these - great idea!
I have a suggestion:
HKCU/ControlPanel/Backlight sets the backlight duration for the keyboard (in seconds). It's available through the control panel, but I like it set to more than the CP maximum of 10 seconds. Sorry - I don't know how to create a reg file.
To reset, choose another value in the backlight control panel applet.
Don't have any others to add though
Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.
This one is in this forum:
from davidberrysmith
--------------------------------------------------------------------------------
Any body remember these reg tweaks from himalaya? they still work
*** Speed Up Your Windows Mobile Pocket PC.
1. Open your registry editor o_n your Pocket PC
2. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE\
3. Change the value of 'limit' from 8192 to 32768
4. Close registry editor and soft reset.
*** disable start menu animation
Browse to HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\
Change the "AniType" value from 6 to 0.
_________________
i-mate jasjar
Click to expand...
Click to collapse
SiliconS said:
Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.
Click to expand...
Click to collapse
Nice one dude. I can't make the .reg file cos I can only create reg files of the entire key, and there are too many other things under GWE that users may have changed.
Internet Explorer
Somewhere in those forums I found the IE reg hack to make mine 5.5, this helps connecting to my bank account and viewing other secured sites.
read this somewhere
To change the ability to receive files via Bluetooth (OBEX)
The setting is at 'HKEY_LOCAL_MACHINE\Software\Microsoft\Obex'
The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
says receive so i dont know about send, try it!! might be it
But apparently now this is the same feature as the receive incoming beams setting in connections.
Yes, I know that's not free but 90% of all this hacks have been included in Tweaks2K2. And the other 10% are about to be included :twisted:
Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.
craigiecraigie4 said:
Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.
Click to expand...
Click to collapse
With your .reg files as inspiration I'm just about getting there in the same way. I've written down all the steps and I just run through them. I've done this since I had my XDA2 and it makes a hard reset so much less traumatic:
Code:
Hard reset. Wait for Today screen then soft reset.
Connect cable to ActiveSync. Set up guest connection.
Turn off beams, error reporting
Set basic clock accuracy
Copy Step 1 files to root of PPC [These are the CABs for the programs I install]
Run CABs. Leave O2 Connections CAB. Put gps.CAB and PIMAddin onto storage card
Run TRE registry editor. Associate .reg files to TRE
Open the .reg file [This applies my registry settings. See below]
Run O2 connections CAB
Copy all Step 2 files to root of PPC [This adds shortcuts to StorageCard-installed programs to my Start Menu and gives me my freeware email client and PZP icons and profiles]
Run SDK Certs CAB
Run OzVGA. Change all fonts to same size as qVGA
PPC: edit registry: browse to HKLM\ControlPanel\GPS Settings. Delete the DWORD marked "hide"
CPL > Personal > Buttons: match Button 2 to [Task switcher], Button 4 to <Rotate Screen>; Set button lock
CPL > Personal > Menus: ActiveSync, File Explorer, Internet Explorer, nPOPw, Pocket Informant, Task Manager, TomTom Navigator
CPL > Personal > Owner: set owner information
CPL > Personal > Phone: change band to GSM
CPL > Personal > Today: set items to Date, PZP, PocketPlus, PocketBreeze, Messaging; set theme to Windows Default
CPL > System > Clock: Show time on all screens
CPL > System > Regional: Set locale to UK
CPL > Connections > GPS: set program port COM0
Soft reset
Set password for PPC
PC: backup previously sync'ed files folder
PC ActiveSync: delete previous partnership. Don't delete sync'ed files folder
CPL > System > About: Set DeviceID = XDAExec
Connect PPC and PC with cable
Sync only Contacts, Calendar (all), Tasks, Favourites
Sync files. Replace the items on the device
PocketBreeze: import settings
PocketPlus: import settings
PocketInformant: run and let it fanny about
PocketWeather (on PocketBreeze tab): import settings
Run ListPro. Enter registration code
Disconnect from PC
Set up phone speed dials
Set up voicedial tags
Set up ActiveSync via Bluetooth to Workstation
Set up bond to headset
Set up bond to GPS thingy. Choose Serial Port as profile
Start TomTom Navigator. Run through startup.
InternetExplorer: sort out view settings. Set default page to about:blank
Choose Transcriber input method. Import settings file
This is my .reg file that does almost everything I need done in one step:
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings]
"Group"=dword:00000002
[HKEY_CURRENT_USER\ControlPanel\Backlight]
"QKeyLedTimeout"=dword:0000001e
[HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client]
"Keyboard Layout"="00000409"
"BitmapPersistCacheSize"=dword:00000001
"BitmapCacheSize"=dword:00000015
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00004000
[HKEY_LOCAL_MACHINE\nls\overrides]
"SSDte"="d/M "
[HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD]
"PieHomePage"="about:blank"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"TBOpt"=hex:\
13,00,00,00
It makes a massive difference using commercial software that has a reliable import/export process for the settings and this, IMHO, is usually the biggest difference between paid-for software and freeware alternatives.
Silicon, don't u want to re-post your post here:
http://forum.xda-developers.com/viewtopic.php?t=31697
We need more of these 'standard' configs to help new users get up n running without giving up on their universal.
dude, your screen - how?
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same
Re: dude, your screen - how?
simon_darley said:
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same
Click to expand...
Click to collapse
You don't want merc!! well u can just f off then! ;-)
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins
Re: dude, your screen - how?
craigiecraigie4 said:
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins
Click to expand...
Click to collapse
Whatever it is, it's distracting to have such a big picture in your signature in such text-based forums.
Sorry craigiecraigie4. Don't mean to offend. Just MHO.
Does anybody know why this happens:
Whenever I change registry (for example HKCU\Control Panel\SIP\..), after reboot it gets reverted to original value.
I used Total Commnader. Roms I tried: 2.17 (qtek) and 2.24 (cingular).
Help appreciated.
Thanks.
after changing your registry, be sure to save the changes by a soft reset. To do this, do NOT poke the reset hole with your stylus, but rather shut the device down with the on/off button. Hold it for 5 secs untill the warning pops up. By resetting this way, your device uses the 5 secs untill the screen pops-up to write the registry to the ROM. If you soft reset immediately with your stylus after chaning the registry, the device has not enough time to write the changes to the ROM. Therefore, after a quick soft reset with your stylus changes might not be saved and the registry remains unchanged.
Problems with Registry settings
I also have problems with Registry settings. For instance some values seems to change back after a turn off/on (power button). Does anyone have a good doc/link that explains which Registry settings that actually can be changed by CAB-files and stay changed ?
Just to mention - on an SP5 (sorry for this in Wizard/K-JAM) I had a CAB-file that changed the Contacts soft-button into starting a 3rd party application. This only changed when an incomming call/phone application was started..a little confused about that
hi people, i would like to know what cab do i need to make this menus much smaller? i've found it before.... but i never downloaded it, thanks
You can use Advanced Config to reduce the font size in the menus.
thank you very much
But... I tried it and everytime i change the values, it auto resets when i restart... I'm using spb mobileshell by the way !
Really...strange. I've used spb and it has never fudged with those reg values.
When I changed the values in Advanced Config, I needed to soft reset before the changes would be applied anyway.
You can create a shortcut that applies the reg settings and put it in the Windows\Startup folder. Still that kind of hack should not be necessary. Perhaps you have some other program in Startup that is causing the problem.
you gave me the idea and i just tried... putting the folder on C:
and then i changed the values with the keyboard, it reseted... and stayed that way for a lonnggg time until i took out the battery and turn it on again
then I changed the value by holding the down button and then selected other stuffs and restarted and now it's ok
Thank you very much !!
Uhm...glad I could help, I think,
they should be a setting in the setup to do that.
Go to google, type in "htc small menu", click on the VERY first link you see. Brings you to a thread here at xda.
That's what you were talking about right?
If so then you're welcome .
Also: If you want to easily and fully customize the font for everything on the phone (size and font type), look into downloading something called ING Change Font.