I have a problem on pairing the device with any bluetooth enabled device. I can recieve stuuf from any Bluetooth device however cannot send anything. I am using a O2 XDA II...ROM 1.60.00WWE Radio 1.08.00 Protocol ver 1337.18 & ExtROM version 1.60.44. Can some body pls help me out' coz i see that on the O2 XDA IIs, when u select Bluetooth, you get various options of connecting to other Bluetooth devices ?
Any help will be greatly appreciated.
Related
hello guys... i'm just confusing
i'm try to connect my xda via bt as a modem ( i use sony erricson phone ) and make the connection as the dial up its working, but not work at xda II ,
i already make the pairing as the dial up cause i always going somewhere with my laptop and xda and connect to the internet via gprs, also i tried at the wi modem of xda through bt connection ...not work....anybody have suggestions..... thanks a lot
The XDA is currently not supporting the modem profile. You can use other device as modem but the XDA it self cannot be used as such via bluetooth.
Regards,
Mark
Hi,
In the following document you can find the answer. (last question)
This is for the qtek 2020 or XDAII with Win XP
Cheers
Somehow I managed to make a connection (pair the evices) but when it comes to establishing what kind of services can happen between the two devices, nothing happens. In the end, I have a connection, the devices show as paired but I can't move files or connect one to the other in any possible way. Any ideas anyone?
Runing ROM 1.66.00WWE
Radio 1.10.00
Protocol 1337.18
Ext ROM 1.66.131
on notebook running
Windos XPhome
Sony USB BT adapter
@MCEITLIN
To what device have you connected?
mark
I paired a vaio V505 tunning XP and my I-mate
Cheers
device
markutah said:
@MCEITLIN
To what device have you connected?
mark
Click to expand...
Click to collapse
i'm using the xda 2 and laptop ibm x 31 with bluetooth install from ibm, u got the answer
Re: device
@MCEITLIN and @benmuliono
If your devices are paired then you can active syn over BT to sync your device and the pass-through to connect to the internet.
Indeed you can't browse the network because the network profile is not supported by the Bluetooth stack used in the XDA.
To be able to browse the network you've to use the WidCom Bluetooth stack and a BT dongle on you PC/Notebook/Laptop whatever which supports the network profile or PAN.
The WidCom bluetooth stack can be found on this forum
Mark
I'm using my XDA as an IP Phone with x-pro from x-ten. If the power comes from the battery, my partner can't hear my voice after 5sec. anymore. Subsequently the whole wlan connection breaks off. When I connect the power cable to my xda the problen doesn't appear...
Therefore my question:
What are the diffrences between battery and cable mode?
Thanks for your help
Ellork
----------------------
xda 2i
ROM 1.11.01 GER
Radio 1.03.00
2003 SE
Help - I have both a Qtek 9090 and a Vodafone V1620 which I use a Jabra BT250V Bluetooth headset with. I have been using all day and then all of a sudden the Bluetooth will disconnect and I can not Longer connect my headset to the PDA.
I have tried a soft reset, unpairing the headset and recreating it but nothing seems to work.
Also I have a collegue who also is having a problem where he can hear the person on the phone but they cannot hear him.
here is the Device information for both devices
Vodafone V1620
Rom Version: 1.31.00 WWE
Rom Date: 12/13/04
Radio Version: 1.12.00
Protocol Version: 1337.42
ExtRom Version: 1.31.175 WWE
Qtek 9090
Rom Version: 1.40.00 WWE
Rom Date: 03/10/05
Radio Version: 1.12.00
Protocol Version: 1337.42
ExtRom Version: 1.40.147 WWE
Does anybody have any ideas if this is the PDA's or the headsets
I just recently bought the Jabra BT250v.
The experience is that it is not as good as the previous model BT250 / BT258.
Everytime after softreset, the connection will disconect even the BT icon (not headset icon) is there.
You then have to disable the bluetooth connection and enable it to get the connection back....(softreset is not required though cause u have already done...)
Hope this help..
Cheers,
Just to clarify, is your device (v1620) a Universal? Isn't it supposed to be the v1640? Here in spain it's called the v1640 but not sure from where you are.
If it is a Universal, pls post your POWER settings when running on Battery.
I have a MDA Pro with a benq-siemens BT headset and am having the same problems. My MDA seems to switch off BT after a call.
my power settings are that the phone shuts off when not used for 3 minutes. Does anybody have a solution?
I upgraded the ROM on my XDA II from 1.60.00 WWE to 1.72. Also upgraded the Radio Version from 1.10.00 to 1.17.00. Everything is working great except the Bluetooth headset. I go through the linking process and it tells me everything is linked, I turn on the Bluetooth but it will not link. Any thoughts or ideas will be appreciated. Thanks.
I did the same thing, and now am facing the same problem with the bluetooth PC synchronisation... the same, that everything's connected, but the bluetooth sync on the device won't just start...
Same with MDAII
Hi.
I did the update on a german t-mobile device (MDAII) with the same effekt. I had the headset working with the Bluetooth Tools once with this rom version, but unfortunately the GPS does not work with BT Tools. The GPS works without BT Tools, but Bluetooth Headset has the problem described in the original post.
Please if anyone can look into that problem and help.
Thanks a lot and kind regards,
Uwe
SOLUTION
try the BCHS bluetooth stack it works well.
Hi All
Found a lot of wonderful stuff here, but still stuck.
Can an O2 XDA Mini S be 'flashed' to support A2DP? I want to
use mine with a set of Motorola S9 Bluetooth stereo headphones
and MP3 player software
I have tried a number of ROMs (TNT 4.0, etc) but it still I only get a
'hands free' check box not a 'bluetooth stereo' or the like box
I have ROM version 2.21.4.1.WWE
Protocal Version 413.1.03
ExtROM Ver 2.21.4.101
Any help for a poor newbie would be great
Thanks in advance.
I use Vanilla by NotTooSmart, and A2DP works fine with this ROM.
If You cant find it on the net, please let me know via PM, and I will upload it somewhere for You.
Hi
Thanks for the reply - I have got a bit further.
It appears my unit may be CID locked, so I have been using batch
tool and pdocwrite and that seems to work.
I have tried Titan V2.0, TNT4.0 and SeeNoEvil all of which give me WM6/
A2DP, however all of them stop my 'Contacts' from working. When I tap
'Contacts', it flashes up and closes again - any ideas? Do I need pocket
outlook installed?
JayDee
Are you saying that if your Wizzard is CID Locket you will not get the A2DP module to work?
I have a G4 and use ShellTolls to flash it.
I am just about to purchase an BT Headset.
Please reply and let me know if there will be any problems.
Cheers,
Slawek