Related
Anyone had any problems with this, or any other headset, it seems to bond ok, and i click yes to add it as a headset profile, but I cant get it to transfer the audio to it when making/reciving a call. I know it used to work, and it worked with WM2005 but not with 2003 (had to downgrade)
Ideas anyone
Joel
I've got a problem with Dopod 818 Pro's voice command software.
The software that is use is Cyberon VC 1.6, which is different from Jamin's Voice Speed Dial 1.1
Using Jamin's Voice Speed Dial 1.1 (I've flashed Jamin's rom), I can use bluetooth headset button to activate and dial very successfully every time.
However, when using Dopod's software (Cyberon VC 1.6), I can only activate the voice command once using my bluetooth headset's button. After that I cannot use it anymore and have to reboot the Dopod in order to make it work again. I noticed that after the headset is turned on, it never turns off again using this software.
I'm using a SC HBH-662, 818 Pro AKU2 WWE.
Do anyone experiences this problem? Is it a problem with my Headset instead of a software problem. (I'd need to consider replacing my bluetooth headset). If everyone is experiencing this problem with Dopod, then I think it is probably a software problem, or there are any registry setting that I can use to fix it?
I have noticed the same problem, though not everytime. It seems that if you use the software to dial a phone number, and then end the call, the headset shuts off and may or may not work again with voicecommand.
Anyway, yes, it's weird. I'm using a SE bluetooth headset as well, but I think it's software related.
Anyone not using Sony Ericsson bluetooth headset having the same problem? If yes, I think I'll just downgrade it back to imate rom.
Same Here!! I just loaded the new Dopod ROM and selected the few files from Ext ROM that I wanted and noticed that Cyberon Voice Commander worked once with the bluetooth headset (nxZen) then refused to work after that. Hopefully some genius here can help figure this out. Cyberon's VC seems really good, just need it to work over bluetooth.
voyager
Jabra headset same problem here.
AX2 and Plantronics Voyager same issue. I think it is similiar to the issue people are having with MS Voice Command on the Wizard using the Reg hack to redirect the BT Headset button to activate VC
I'm having the EXACT same problem, with the same headset (hbh662). Interestingly enough, I installed MS Voice Command side-by-side with Voice Commander. Once you activate Voice Commander the first time (and it makes the audio gateway connection to the BT headset), you can use MS Voice Command to issue commands through the headset. The problem is that it seems to only be able to do this once, and then you have to reset. The other thing I've noticed is that all audio is rerouted through the headset; if your phone rings while the BT gateway is active, you will only hear it in the headset (but you get to hear Voice Command anounce the caller). Ah well, at least it works for about 10 minutes per reset. :?
I have exactly the same problem with you guys with my SE HBH-610a and i.Tech Clip R35, and some other SE and i.Tech models which I have also tried. Can only activate once, and will not work again until a soft-reset. This has been like that since the shipped ROM, and the new ROM didn't fix this problem.
Voice command over BT on the i-Mate AKU2 rom works great though, and works 100% of the time!! Though both from same company Cyberon, the one on Dopod is VOICE COMMANDER, and the one on Imate is VOICE SPEED DIAL.
I have tried un-installing Voice Commander from my Dopod and installing Voice Speed Dial (from hack in this forum), but didn't get voicedialling over BT to work this way on the Dopod. Sigh!!
Has anyone contacted Dopod on this matter? If I-mate can implement Voicedialling over BT correctly, I don't see why Dopod can't!! I will write to Dopod. Can't imagine calling their hotline again...the last time I called, I had to wait at least 50mins before my call was answered.
Peter
Still no solution for this?
Still no solution for this issue? Isnt there a way to port/convert Project VCABT to the Prophet?
That would be more than great"!
I have the same problem plus it does not recognize my voice command. Alway dials a wrong person. :evil:
Any progress?
Dear Friends,
Has anyone had any progress with this issue? 3-rd party software? Maybe some bluetooth stack patches.
Please, if anyone has any valuable information to share, please do.
With warmest regards...
there is a major problem with the ROM
Until a new one is produced the BT will be stuffed
Do any of you have MSFT VC 1.6 installed on the Advantage? I know there were many issues with this software app and the TYTN (such as notifications through speaker and being forced to apply a major registry settings tweak). Can someone confirm that using MSFT VC 1.6 works perfectly with the Advantage or if there are similar problems like with the TYTN?
Thanks
fpbiii said:
Do any of you have MSFT VC 1.6 installed on the Advantage? I know there were many issues with this software app and the TYTN (such as notifications through speaker and being forced to apply a major registry settings tweak). Can someone confirm that using MSFT VC 1.6 works perfectly with the Advantage or if there are similar problems like with the TYTN?
Thanks
Click to expand...
Click to collapse
it works perfectly on my DOPOD U1000, no problem at all!
wu5262 said:
it works perfectly on my DOPOD U1000, no problem at all!
Click to expand...
Click to collapse
I copy that! Work like a charm on my Ameo.
Yup, it all works perfectly on my Ameo, even issuing commands thru bluetooth is working fine, which was a pig to sort out on the Universal.
Can you please tell me how you got your msft 1.6 voice command working? My audio still routes through to the speaker, not the BT headset. Do you have to do anything to get it working?
I went through all the other forums about this, nothing works.
~Sigh~
I installed it - and it all worked, no tweaking required.
Have you set the "Notifications" settings to direct the audio to Bluetooth only?
What about Voice Command 1.5?
Has anyone got 1.5 to work?
When I try, I just get "Voice Command has encountered a problem. Restart Voice command and try again"
I've tried installing it both to Main Memory, and Microdrive. I've tried resetting it both before and after installing.
No joy.
Anyone else have more luck?
dalelane said:
Has anyone got 1.5 to work?
When I try, I just get "Voice Command has encountered a problem. Restart Voice command and try again"
I've tried installing it both to Main Memory, and Microdrive. I've tried resetting it both before and after installing.
No joy.
Anyone else have more luck?
Click to expand...
Click to collapse
I have had same issue with v1.5 going to try v1.6 hope it works ok
Doesn't really work on my Advantage. Works just like it did on the Tytn.
Activating MSVC thru headset works. All audio comes thru speaker phone. Notifications do not go thru headset only thru speakerphone
And yes, I have notifications set to onlu bluetooth..Oh Well
eagle 1 said:
Doesn't really work on my Advantage. Works just like it did on the Tytn.
Activating MSVC thru headset works. All audio comes thru speaker phone. Notifications do not go thru headset only thru speakerphone
And yes, I have notifications set to onlu bluetooth..Oh Well
Click to expand...
Click to collapse
strange mine one works.....didn't change anything
Mine works flawlessly through bt when initiated from the device. However, I am unable to initiate with my Jabra BT8010
I found out that if I uncheck the Password Protected box in MSVC settings' dialogue that it works fine.
activate Voice Command via BT Headset?
Can you activate the BT via the BT headset? I remember trying one long itme ago on a Blue Angel and I had to configure a button on the device to activate it. Does it work there?
Thank you.
delsolman said:
Can you activate the BT via the BT headset? I remember trying one long itme ago on a Blue Angel and I had to configure a button on the device to activate it. Does it work there?
Thank you.
Click to expand...
Click to collapse
it works on mine, by just pressing a button on my bluetooth headset
victoradjei said:
Mine works flawlessly through bt when initiated from the device. However, I am unable to initiate with my Jabra BT8010
Click to expand...
Click to collapse
Have you changed the mode to phone on you BT8010s? Otherwise it just keeps playing/pausing your music.
Works perfectly on the three x7500's I purchased. ;-)
I've been using the Mocrosoft voice commnd v.1.6 for a few weeks now. I have the US version, which unfortunately have a different dialing rule from ours in Australia. So, you can't use the dial funtion - only the call funtion would work in Australia. For those not familiar, "dial command" is supposed to let you dial a number. whereas "call command" lets you call a contact by name or nick name in your address book. The numbers, to be acceptable and recognised by the dial command must be one of the following formats:
nnn-nnnn
nnn-nnn-nnnn
1-nnn-nnn-nnnn
n-1-1
international dialing with a + or 0 prefix.
I was puzzled as to why I was unable to use the dial command, and to me a while to realise the limitation.
I heard from other forum participant that he has used the UK version, which allow him to dial the australisan numbers.
If you use this product, could you kindly look into the help file under tips for making calls and list all the number formats acceptable to the UK versions please?
Thanks
Have now purchased VC 1.6 German - disappointed....
In my car I have an FWD audio com car kit - no audio comes from the car kit. Everything is going throug Ameo speaker and mic. Therefore impossible to use in car while driving.
Settings: password unchecked, BT only.
What can I do ?
Dieter
dieterpapa said:
Have now purchased VC 1.6 German - disappointed....
In my car I have an FWD audio com car kit - no audio comes from the car kit. Everything is going throug Ameo speaker and mic. Therefore impossible to use in car while driving.
Settings: password unchecked, BT only.
What can I do ?
Dieter
Click to expand...
Click to collapse
Is your BlueTooth turned on? Is your car kit paired using the Hands-free profile?
TO CHECK:
In Comm Manager, go to Setting menu and select BlueTooth.
In "Mode" tab, made sure BT is on!
In "Devices" tab,
* If it shows in the list tap on it and see whether Hands Free is enabled.
* If it does not show, tap "Add New Device..." and follow the steps.
When I press the bt500's headset button to activate voice command I still have to speak into the trinitys built-in microphone and the responses come from the built-in speaker.
I've had a look around and the solutions so far seem to be for wm6, im still on wm5, or reg updates for keys I dont seem to have.
My apologies if I have missed anything obvious but is there a solution for this problem?
Also while im here is there a way to turn off the confirmation request for dialing contacts through voice command.
I'm having the same issues. I owned an imate Jamin before the this and it worked perfectly. I understand the jamin was manufactured by HTC so I do not know why the p3600 doesnt work.
Will Hermes Fix work?
Does the hermes fix for the voice command 1.6 issues work on the trinity?
http://wiki.xda-developers.com/index.php?pagename=Hermes_Utils
Hi,
I have an original i-mate JAM and one of my frustrations is that it does not support making voice activated calls over bluetooth.
Is anyone able to confirm that this is possible with the JAMin?
TIA
G
Yes it is.
The Jamin (at least with official i-mate ROM) has built in "voice speed dial" (cut down version of Cyberon voice commander) and it works fine over BT.
Tried with Motorola H350 and Scala 500.
Thanks for the answer levenum.
Related question: has anybody been able to use a Jamin with Ford's in-car audio system? I can't get it to connect but, even more annoying, my daughters £50 phone connected first time!!!
Bumping this in the hope that someone out there uses a JAMin or similar with Ford Audio in-car bluetooth...