I dropped my phone and the screen now doesnt respond properly: The hardware DID successfully upgrade to the XDA ROM. But touching it causes the backlight to go on, - but most of the keys dont do what one would expect them to do: The phone turns on with a reminder from the calendar on the screen which wont DISMISS or CLOSE. Pressing on the windows logo and then on the phone key causes the calendar to come up and I am not sure which numbers are entered when I do manage to get the phone to come onto the screen (none of the right hand numbers seem to work at all). Does anyone recognise these symptoms and/or could they just show that my SX-56 needs the ROM RE-flashing? I should add that pressing the Master Reset button with this ROM in place seems to make the phone shut off and then when you restart it, all of the data remains in place. I wonder if there is any possibility that the XDA ROM has prevented the reset button from working normally?
A user on another forum said that to him, '"Sounds like the digitiser is up the swanee - have you tried recalibrating it?"
10-12 vertical black lines started appearing to the right hand edge of the screen. Sometimes they are there, sometimes not. THere is usually at last one there somewhere. At about that time the screen stopped responding as I mention. Today the left third started displaying the same veritcal lines, though spaced quite far apart (about a millimetre). Screen doesn't APPEAR cracked: Does this sound like a digitiser and if so, how do you recalibrate it please or is there a link to somewhere on the XDA site which I cant find which might tell me? Or could it be the cable is loose in the circuit board? As you touch the lower right hand corner of the metal casing where the vertical lines are, those lines flash (the right 10 or 12) on and off. And every coloured bar everywhere on the screen or word of text has vertical lines on it (the white parts don't)??
Someone on ebay has said that his phone "fell from my pocket and onto the carpet and the screen cracked, I then used it for about a week" "I sold the screen to someone cause the wanted the touch pad part of the screen for there phone". and wonder what it was he sold or which part can be replaced on it? IS there a touch part and a screen part on this phone?
To be honest, itsounds like you have brocken a connection somewhere between the LCD and the gfx output, probably not possible to repair yourself.
I wonder where the break would be?
I thought that might be the case: I wonder if it would be worthwhile trying to get another screen?
I should probably try to take the unit apart and see if some break somewhere can be identified if it is a break as opposed to some electonic part having failed. It SEEMS to be in the lower right hand corner?
Related
I took apart my tytn, including the screen part.
After reassembling it, I've had random issues related to the keypad and screen.
By keypad, I mean all the keys on the screen part of the phone (D-pad, call/hangup,soft left/right, Internet Explorer & Email).
They will randomly cease working and randomly restart working (usually after turn on/off the screen with the power button)
The screen will also randomly turn white and come back on only if I turn off the screen and then back on.
Im thinking it has to do with a loose connection somewhere in the screen section of the phone, however, Ive taken it apart 2 more times to check everything out and the problem persists.
I wonder if anyone experienced the same thing and found which specific internal is the issue.
i would like to know too cause my buttons just stopped working. so the talk, end, message, Internet explorer, ect. but the left down up right and center button work.
I have the exact same issue.
All the keys (not keybord keys) randomly stops working. I am so used to it now, that I dont even try to answer the phone with the green key button.
The screen fades to white, sometimes (maybe 1-3 times a day).
The screen is white when awakening from "sleep mode", turning on and off the screen fixes that after a while (50% of the time white screen when from sleep mode).
I have found out that putting a finger nail between the keyboard and the screen, on the right hand side, when in closed position, and then putting the screen back on, gives me a 99% chance of funktional display.
The problem also accurs in the "full keyboard position", But putting the finger nail in the same spot helps.
So I think the problem of the connection is in the keyboard part of the phone, since those slide contact always are on the right hand side, and the display contact shift side.
I would lite to know if any body have a permanent solution for this.
(I have now opend my phone yet, and I have tryed the putting thin plastic between the display and the cover, with minimal success)
thanks for your time
alkizmo said:
I took apart my tytn, including the screen part.
After reassembling it, I've had random issues related to the keypad and screen.
By keypad, I mean all the keys on the screen part of the phone (D-pad, call/hangup,soft left/right, Internet Explorer & Email).
They will randomly cease working and randomly restart working (usually after turn on/off the screen with the power button)
The screen will also randomly turn white and come back on only if I turn off the screen and then back on.
Im thinking it has to do with a loose connection somewhere in the screen section of the phone, however, Ive taken it apart 2 more times to check everything out and the problem persists.
I wonder if anyone experienced the same thing and found which specific internal is the issue.
Click to expand...
Click to collapse
These are the exact symptoms of the "SCREEN FADING INTO WHITE" problem. See this thread for more info: http://forum.xda-developers.com/showthread.php?t=303872
The common causes for this are a bad connection to the D-PAD controller PCB (in the technical manual they mention it should be carefully checked and the really small screews with same torque making a 90 degree with the PCB), a bad controller (that was my case, had to order a new one) or not enough pressure on the square black chip on controller (some people seem to have fixed it by putting a plastic sheet in between the chip and the case, to apply constant pressure).
I suggest you try to re-open your phone and reconnect the D-PAD PCB as carefully as you can, double checking the connection and the screws there.
I did fix my problem, by ordering a new PCB and replacing the old (probably bad) one. It started to happen after I dropped my phone and it's the only thing that worked. Now my phone is as good as new.
Hope this helps!
Similar Issues with screen
I have similar issues;
Anything thats on the foreground gets closed by the 'x' button and if I slide it open the start button gets continually pressed!
Seems to be the top right corner of my TS thats at fault
sometimes it's fine....most of the time its not!
Andy.
I have the same! I have a huge dead spot in the middle of my (Tytn) screen, and if you tap there it actually activates the "ok" in the top right corner. The rest of the screen works ok. Whilst drawing in notes any drawing near the center dead spot results in a streak to the top right hand corner...
Bad screen?
Bad rom?
Bad motherboard?
lepic2019 said:
I have the same! I have a huge dead spot in the middle of my (Tytn) screen, and if you tap there it actually activates the "ok" in the top right corner. The rest of the screen works ok. Whilst drawing in notes any drawing near the center dead spot results in a streak to the top right hand corner...
Bad screen?
Bad rom?
Bad motherboard?
Click to expand...
Click to collapse
You can rule out the ROM and M/board in my view for this specific problem. Your issue is very similar (and I think has the same cause) as those who find programs close randomly when in portrait mode and when they open the keyboard the start menu often pops up untapped.
I think this is just a case of a bit of pressure being put on the screen top right corner. Some folks have tried the business card run around under the bezel fix and had some success others have had to return for replacement/repair.
Some have taken the device apart and removed the gasket around the screen under the bezel, but this is not guaranteed to work.
Others have replaced the screen and for this particular problem it is very rarely successful as the screen is not normally damaged.
If you have a warranty use it - all of the above "fixes" are warranty voiding.
Mike
Hi Mike
It's an interesting problem as when performing a click and drag in Notes (drawing mode) the center section of the screen seems to work normally - a square box can select an area right through the middle of the screen - suggesting that the screen (as you say) is OK. So what is causing the a tap in the middle of the screen to register in the top right hand corner, when we now know that the center of the screen can work and respond in the correct manner. The size of the affected area is about the size of a thumb print EXACTLY in the middle. Personally I would like to believe that performing screen alignment 4 - 5 times a day for the past year has worn out the center dot and that is affecting the surrounding area. The trouble is that this fault has been reported on this site a few times now, and everyone says it's caused by something else! What did I do immediately before this happen I hear you ask? I flashed a new radio rom and was fiddling with a piece of card I have wedged down the RHS side of the screen to try and help stabilise the screen alignment. Since this problem arouse, I have removed the gasket - but that hasn't fixed it. I'm going to try and boot up the phone out of the casing to see what "zero" pressure applied to the screen does.
I'll report back...
Lepic.
lepic2019 said:
Hi Mike
It's an interesting problem as when performing a click and drag in Notes (drawing mode) the center section of the screen seems to work normally - a square box can select an area right through the middle of the screen - suggesting that the screen (as you say) is OK. So what is causing the a tap in the middle of the screen to register in the top right hand corner, when we now know that the center of the screen can work and respond in the correct manner. The size of the affected area is about the size of a thumb print EXACTLY in the middle. Personally I would like to believe that performing screen alignment 4 - 5 times a day for the past year has worn out the center dot and that is affecting the surrounding area. The trouble is that this fault has been reported on this site a few times now, and everyone says it's caused by something else! What did I do immediately before this happen I hear you ask? I flashed a new radio rom and was fiddling with a piece of card I have wedged down the RHS side of the screen to try and help stabilise the screen alignment. Since this problem arouse, I have removed the gasket - but that hasn't fixed it. I'm going to try and boot up the phone out of the casing to see what "zero" pressure applied to the screen does.
I'll report back...
Lepic.
Click to expand...
Click to collapse
It will be interesting to see what results you get. You'll need the old rubber band technique to hold the battery in place while you do it!
Mike
Well it's not due to the case squishing the sides of the screen as I just dismantled my hermes, wired it all up in bits on my desk, powered it up and still the screen has a dead spot in the middle and phantom taps in the top right. Temperature is normal room temp, approx 22deg c today.
I'm not sure the exact mechanisms of how these touch screens work out where you are tapping (resistance, voltage), but it looks like there are 3 separate strips running around the screen. 1 goes straight across the bottom, two goes up the LHS and across the top and 3 goes up the RHS. Therefore there is a gap between strips 2 and 3 in the top RH corner. Coincidence? hmmm It seems to me for it to register a tap in the top RH corner, strips 2 and 3 would register low voltages (or high resistance) and bottom wouldn't register at all. Thus suggesting a fault with the PSU that powers the touchscreen. Taps near the edges work because they are near the edges and therefore the resistance is not too great and can be detected, taps in the middle and worse off because they are far from all the detecting edge strips.
Does anyone think that there might a registry tweak for boasting power to the touchscreen?
Hermes Whie Screen Problem
To fix the "white screen" problem, you have to take your unit apart, and reconnect the ribbon cable.
I have a new 8525 and it started happeneing to me, so I took it apart this week, and reseated the ribbon connector.
Fixed the problem.
Has anyone here read and understood all that is said here:
http://msdn2.microsoft.com/en-US/library/aa919680.aspx
Perhaps someone could compare the touch.dll in Black Majik to WM5 - should be the same right?
How come that HKLM/hardware/devicemap/touch doesn't show the touch.dll driver as drivername? Keyboard has it's driver...microsoft says it should say drivername = touch.dll
Do you all have that in your registry?
I have read a few posts about the white screen issue and some seem to pertain to my problem and others don't. My screen is white 100% of the time from power on to power off. So I can't seen anything when it first boots or comes out of standby mode or any thing else. The only way that I can get the screen to be anything but white, is to hold it in my left hand with the keyboard slider bottom left corner of the phone pushed up against the base of my thumb muscle and my other fingers pushing on the bottom right corner or the phone on the screen slider. Sometimes if I hit it in the bottom right corner then squeeze it I can get it to work without tiring myself out from squeezing after 1 minute.
Seems to be a pressure and angle thing i think. The phone has been dropped on more than one occasion. Ten tops. Sometimes when I squeeze it i get lines from left to right, then fade to white.
If I put the phone on 65-90 degree angle from my eyes I can see a little black mark at the top of the screen under the C of HTC. That is what had me thinking that it was a cracked LCD.
Any help would be greatly appreciated. Phone is still under warranty, but would rather not be without it for the 6 -8 weeks I was told it would take, only to find out it was a cracked lcd and they won't fix it.
I believe you have to open it. Try to connect every single connection again.
I Had This
I had this problem when i dropped my Vario 2 the screen cracked and was all white, when i went on ebay and bought a new screen I took the vario 2 apart and replaced the screen BUT the ribon connector that plugs into the board was not quite in so when i re-assembled it i just got power and white screen.
There are a couple of little lugs on the ribon cable and i though that once they were butted up to the connector on the board that it was in properly. BUT the lugs actually needed to be pushed that little bit further and slide under part of the connector. BANG it worked fine.
bmaffin13 said:
I have read a few posts about the white screen issue and some seem to pertain to my problem and others don't. My screen is white 100% of the time from power on to power off. So I can't seen anything when it first boots or comes out of standby mode or any thing else. The only way that I can get the screen to be anything but white, is to hold it in my left hand with the keyboard slider bottom left corner of the phone pushed up against the base of my thumb muscle and my other fingers pushing on the bottom right corner or the phone on the screen slider. Sometimes if I hit it in the bottom right corner then squeeze it I can get it to work without tiring myself out from squeezing after 1 minute.
Seems to be a pressure and angle thing i think. The phone has been dropped on more than one occasion. Ten tops. Sometimes when I squeeze it i get lines from left to right, then fade to white.
If I put the phone on 65-90 degree angle from my eyes I can see a little black mark at the top of the screen under the C of HTC. That is what had me thinking that it was a cracked LCD.
Any help would be greatly appreciated. Phone is still under warranty, but would rather not be without it for the 6 -8 weeks I was told it would take, only to find out it was a cracked lcd and they won't fix it.
Click to expand...
Click to collapse
Either send back and keep warranty or try the several solutions posted. I myself am pretty sure I found the correct solution and I posted it in the appropriate thread.
Thanks guys, I think I'm going to try my luck with sending it in. Will probably add a link to the main whitesrceen thread so hopefully I get no hassles. Will post back When I get it back.
I had a similar problem and voided my warranty because I don't have a spare device... anyway, here is where I found my solution.. http://forum.xda-developers.com/showthread.php?t=321163
Good Luck... My phone is still working fine....
Hi mates yesterday i bought a used herm...with excellent condition. but when i opened any dialog. the window closed automatically. and the screen light remains always on. and touch is creating problems.
and after some time the touch screen totally stop working. i dont know what happened. al the buttons are working fine. i upgraded my t-mobile herm to its original t-mobile wm6 rom. and again the touch screen is not working. and the screen light always stay on..
so is this hardware or software problem.?
guide me if you have any clue about this..
according to my thinking.. i think some button is pressed continuesly.. but everything is working fine.. only the touch is not working.
broken digitizer for the touch screen, buy a replacement lcd/digitizer together and replace yourself, about $100Aud. Use Mike Channons site to download the service manual. Use the search function and type in "htc service manual hermes".
As for the light, you will have to use your buttons to navigate to settings>system>backlight>battery power and external power. you can select how long the backlight remains on for.
Cheers...
Hi mate thanks for your reply.. Actually the situation is that. the screen is working perfectly. all buttons are also working perfectly. but suddenly the touch feature stopped working.
that time i was just opening some menus and they closed automatically. it looks like that there is some button pressed. and the screen light never stops. it continuously remains on. all buttons are working perfectly and everything. on the touch feature is not working.
i upgraded my device with genuine shipped t-mobile wm6 rom and again it stopped at the starting screen where i have to click the screen and the device brings the window for stylus adjustment.
so i wanna ask that is this also possible that some touch drivers are corrupted or something like this.? or is this a hardware failure.?
Kind Regards
I had same problem, it was hardware. Thats why I said to change the lcd. It is theoretically possible to replace JUST the digitizer, BUT, it is a MAJOR hassle.
As for getting past the alignment stage, look up Remote Screen Alignment. Its a cab file that stores the alignment settings on your pc. You WILL have to have a friend that has the same phone so you can get their settings as you need to copy them to your pc first. You can then copy the settings to your phone so you can use it until you replace that pesky lcd...
Cheers.....
I had a similar problem with my hermes. After a lot of investigating, I found out that this is a heat related issue with the hermes. The unit will heat up an some connection somwhere gets messed up and continually registers ghost taps on the upper right corner of the screen, which causes the continual opening and closing of programs/task manager. This overloads the phone which then causes the screen to eventually become unresponsive due to excessive computing.
With my phone, it must be heat related because it will only occur during or after heavy use or overcharging. Other people have had this exact problem with the conclusion being overheating. The worse part is, there is apparently no way to fix this, replacing the screen doesn't change anything. setting your screen alignment very far left will fix the problem but then everything you tap needs to be compensated for.
Good luck, hate to be the harbinger of bad news, but it's better to know whats wrong and that you can't fix it then not know whats wrong and keep trying to fix it.
same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??
kingsfan said:
same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??
Click to expand...
Click to collapse
Some of the suggestions in the white screen thread/s might help. The problem is that those who have the heat related problem will find it very difficult to trace the actual fault. The heat may be causing miniscule expansions on the boards / components and connectors. The tiniest of cracks or poor connections can therefore break with the expansion.
Another theory is that rather than heat it might be a capacitor that is breaking down either over time or again through heating. Unless you are a skilled electronic engineer that is virtually impossible to check, particularly since schematics are not available.
You might just be lucky if you dismantled and re-assembled - it might just re-set a connector or adjust a board so it does not get affected in future. That would be very much a matter of luck and of course potentially the situation might be made worse!
Mike
Hi mates. I am back with some issue.. i moved my device to a repair center and he said that its a software issue. and he fixed my device without changing any rom.. i dont know how..
but again when i open some window like programs. the right scrollbar make a problem... when i move scrollbar it automatically press the top close button..i aligned my screen 3 times but same problem with right side scroll bar.
and after playing with it. the touch totally stopped.
now the thing is.all the buttons are working fine and everything is working fine. even sms and calls. but when i check sms and press my scroller button. it displays the right click menu instead of opening the sms. and the screen light is continuesly on. as something is pressed. so. i think this thing wil help. i am now trying this method to check my pc.
http://inuchanbt.blog54.fc2.com/blog-entry-99.html
check this out as well.
i will send you details soon.
might just have something lodged between the case and screen.. also to get rid of the screen alignment, cable it up and delete welcome from the startup programs and then reset it.. should get you past it so at least you can use it until you repair your screen
Hello,
for first I've already read some topic covering the white screen problem. I have the white screen every time on my Hermes since booted. Going into bootloader also shows white screen. I don't see any signs of misalignment.
I've already taken apart my Hermes and reconnected all connectors I've seen, including D-Pad connector, tightening and loosening the screws by it. I see there's nothing else I can fix without replacing any parts (or am I wrong?) What should I buy? Do you think that the actual screen may be faulty? Or maybe the flex is damaged and I should buy it? (well I think that some chip is connected to flex so I don't know if it can be replaced anyway). My main question is: if the screen is all white, is it possible that the actual screen be faulty?
It could be a number of things which could amount to $$$$ by throwing parts at the phone - may be cheaper to just buy another. Before the completely all white screen did you have occasional white screens with increasing frequency? First try some of the fixes for correcting whitescreens - pressure on the dpad - etc. If you still get nothing the chip could have come loose - but who knows?!!!! Need some more information - history etc.
Unfortunately don't know the history... bought cheap off ebay hoping it can be easily fixed already ordered the screen, if no luck, will send as spares/repair in my country - should earn something anyway.
i have a fault with mine some times (well a lot now) when i open it or close it all the way i get a funny fuzzing on the screen and some times it just ends up going black, move it back and forth a bit and the screen collour is inverted. i have to press the power button twice once for off then back on and it stays normal collours till u move the screen again. is this called white screen?
Not really - yours should be an easy fix. Seems like the flex cable is either loose or cracked slightly. It only occurs when you slide the keyboard out right? Any problems with the front keypad - with the unit closed?
Hello everybody,
I have a accidentally cracked Pixel 4. The Display cracks after it falls from around one meter height. I decided to fix the screen and buy a new one. It seems to be not an original Bit the board of the new and the old screen seems to be exactly the same. I opened the phone and replace the screen without any damage. After the screen was inserted I test it if it woks. Success! Everything works (I not tested the touch Funktion yet) after I build most of the things together I give it another try and I recognized that the touch Funktion does not work. No matter how hard I press or hold the connector down etc. I tried many things also a Hard Reset. I never seen such problem before. And my question is: is this the screen, the phone or a software problem? And how I can fix this issue? I am completely confused because I fixed many phones but something like this is new. Regularly the complete Amoled does not work.
If I go to the left upper corner, there is some movement in the screen and this also stays if I release my finger (video).
Video 1
Video 2