Database Users

MMS on QTek S110

Hi there.
I've got a QTek S110 (as title) on O2 UK, and I'm trying to set up MMS messaging. I've spent quite a bit of time searching these forums and google, and although I've had a little success, it's still not working properly. The situation is this:
I can successfully configure the device to send MMS messages, and this works fine. The problem I currently have is with the receipt. If I'm connected to the O2 Wap GPRS connection I have set up for MMS, which sends the messages, then I usually can receive messages I send to myself from another phone. However, if this connection is not active, then the messages just get lost. I'm not notified at all that a message was incoming, and even if I manually connect the device, the message is not received. I never have any knowledge of its passing.
Can anyone help me with this? I'm beginning to go mad, I think...

Have you tried the original O2 MMS cab file from the ext-rom? You can find them on the ftp.
M

oltp said:
Have you tried the original O2 MMS cab file from the ext-rom? You can find them on the ftp.
M
Click to expand...
Click to collapse
I hard-reset my device last night when trying to get it to work, and it didn't configure, so I guess the CAB isn't built into my rom. Could you give me a bit more guidance on the FTP server, I'll take a look myself, but not really sure what I'm looking for.
Thanks for the response.

I got kids, so I say: chips there's no UK O2 ext-rom uploaded on the ftp.
But I found you this:
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
@ this site: http://www.filesaveas.com/mms.html
Hope it helps,
M
URL address: http://mmsc.mms.o2.co.uk:8002

oltp said:
I got kids, so I say: chips there's no UK O2 ext-rom uploaded on the ftp.
But I found you this:
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
@ this site: http://www.filesaveas.com/mms.html
Hope it helps,
M
URL address: http://mmsc.mms.o2.co.uk:8002
Click to expand...
Click to collapse
These are the settings I believe I'm using...
In connections, I have:
Advanced->Select Networks
Internet: O2 MMS Test
Private Network: O2 MMS Test
In tasks, I have
'O2 MMS Test' Is my connection
Manage existing connections->Modem tab->'O2 GPRS WAP'->Edit
-- Modem: Cellular Line (GPRS)
-- Access Point: wap.o2.co.uk
-- user: o2wap
-- password: password
-- advanced:
-- -- tcp/ip:
-- -- -- Use server-assigned: checked
-- -- -- Use software compression: unchecked
-- -- -- Use IP Header compression: unchecked
-- -- servers
-- -- -- DNS: 193.113.200.195
I have also, under the proxy tab, got
This network connects to the internet: checked
Uses a proxy server: checked
Advanced->
-- HTTP: 193.113.200.195 port 8080
I set this proxy as it allows me to access the internet through this connection; it doesn't seem to affect the MMS operation.
In MMS settings, I have:
Prefs:
Connect via: O2 MMS Test (the connection I set up)
Retrieve message immediately: checked
Ok to download when roaming: checked
Save sent messages: checked
Attempts before giving up: 5
Photo Res: 640x480
Servers:
Gateway: 193.113.200.195
Port: 9201
Server address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitation: 100K
--Gavin

Rereading your first post & adding up your last comments, I'm beginning to think to network screws up in this case. Either it doesn't register you as being offline, or it can't store & forward the MMS for you.
Maybe O2 themselve can help you in this, I don't think your device is incorrect configured.
M

I had similar issues with my S100 on Orange. I could send MMS to anyone but the only MMS I could received were if I sent them to myself. I think I've finally cured the problem with the latest T-Mobile MMS client.

6thElement said:
I had similar issues with my S100 on Orange. I could send MMS to anyone but the only MMS I could received were if I sent them to myself. I think I've finally cured the problem with the latest T-Mobile MMS client.
Click to expand...
Click to collapse
So you're using different software for the MMS? Could you direct me to where I could download this/how to set it up.
Thanks
--Gavin

On the FTP
Copy the downloaded CAB file to your S110 and run it to install. MKae sure your messaging app is closed first though! If your wallpaper messes up once you've installed it just reset your wallpaper again.

6thElement said:
On the FTP
Copy the downloaded CAB file to your S110 and run it to install. MKae sure your messaging app is closed first though! If your wallpaper messes up once you've installed it just reset your wallpaper again.
Click to expand...
Click to collapse
Woohoo!
That works, thankyou very much .

My invoice is in the post

Since an hard reset i also have probs with qtek s100 and mms. Does the application which is downloadable a few posts ago compatible to austrian phones too ?

djtwok said:
Since an hard reset i also have probs with qtek s100 and mms. Does the application which is downloadable a few posts ago compatible to austrian phones too ?
Click to expand...
Click to collapse
The application is the same as the one packaged with the phone, just a newer version; so yes is the answer, it should work with austrian phones.

After logging on the ftp it tells me "file not found" ? btw: the app was made for s110 and mine is an s100 does that matter ?

djtwok said:
After logging on the ftp it tells me "file not found" ? btw: the app was made for s110 and mine is an s100 does that matter ?
Click to expand...
Click to collapse
That link still works for me, and it should be fine on an s100; there's not much difference between the two.

VoIP/SIP Config for VoIPBuster

Hi All,
I am try since some hours to get the VoIPBuser working.
I have installed WM6VOIP, SIP Config Tool 2.0.1. Put all informations into SIP Config Tool and get my connection with my Provider.
I made a call to try. The otherside can hear me but i CANT hear them with my HTC P3300..
Those are the VoIPBuster Connection Information
SIP port : 5060
Registrar : sip.voipbuster.com
Proxy server : sip.voipbuster.com
Outbound proxy server : leave empty
Account name : your Voipbuster username
Password : your Voipbuster password
Display name/number : your Voipbuster username or voipnumber
Stunserver (option) : stun.voipbuster.com
Alternate Servers:
Proxy server: sip1.voipbuster.com
Proxy server: connectionserver.voipbuster.com
Domain/Realm (optional*): voipbuster.com
STUN-Server (optional*): stun.voipbuster.com
If you have audio problems:
Use a STUN server (e.g. stun.voipbuster.com) with port 3478 (if supported by your device)
Use the G.711 codec
Here is the connection not working.. Does anyone had before the same problem or does anyone now the way to resolve this Problems?
http://www.voipbuster.com/en/sipp.html

great thanks ive been looking for voip for a while now you made my day

Ok i got the Problem.. Installed now SJPhone and choosed for call Handsfreetalk..
How is it possible to config the Audio for WM6VOIP??

no idea look in wiki or google

3G connectivity plz help!

Those of you who are using 3G on your Uni, can you please check your settings and let me know what do I need to do in order to set up my 3G connectivity please!
I already have the following:
APN
IP Address
2 DSNs
however when I enter this information it doesn't seem to connect perhaps I'm doing something wrong.
I do have a data plan (3G) so that is not an issue which I am currently using with my iphone without any problems.
Thank you very much for your help!

Over 30 ppl read this post and none of you on 3G?
Please your help is greatly appreciated

Re 3G setting for a Uni,
Hi serjay,
Sorry for the wait I have only just come across your message. Here are the setting you need. I hope they work for you?
You can input all the settings, but I can't seem to be able to access the 3 portal.
In settings, connections tab, connections
advanced tab, select networks
new, and input the relevant info from here:
Data accounts: Create one called 3 GPRS.
APN: three.co.uk
Username:
Password:
Login request: Off
Allow calls: Automatic
IP address:
DNS address:
Authentication: Normal
Data compression: Off
Header compression: Off
MMS settings can be entered via outlook menu
gateway: http://mms.um.three.co.uk:10021/mmsc
proxy: 217.171.192.2
port: 8799
(account is the 3UK avvount above)
Not sure if u need to input the Video gateway.
If anyone know how to actually open the portal, plz help,
I think the problem is that the page detects what device you are using, and an exec is not on their list
secondly - use the http://mobile.three.co.uk/hb/7600/HutchKey as access to the portal - just make it your homepage. this one is for nokia, it works with me.
For those who won´t get the 3Zone to work, try the following:
Using a registry editor, find the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent
then edit the default value to "Nokia6680"
reset
and then surf to the 3Zone Homepage for a nokia 6680 (ask someone who has one to find the url out)
3 Reads the "User Agent" String of the browser yourphone uses to find out which phone you have.
With the trick above you configure the Pocket Internet Explorer of your universal to convince three it is indeed a nokia6680.
So normally you only get phones to work which three has in it´s program.
Regards
Michael.

m1dul said:
...In settings, connections tab, connections
advanced tab, select networks
new, and input the relevant info from here:
Data accounts: Create one called 3 GPRS.
APN: three.co.uk
Username:
Password:
Login request: Off
Allow calls: Automatic
IP address:
DNS address:
Authentication: Normal
Data compression: Off
Header compression: Off ...
Click to expand...
Click to collapse
Hi Michael, thank you for your help but I was unsuccessful; perhaps I’m doing something wrong.
This is what I’ve done:
Start
Settings
Connections Tab
Connections
Advanced Tab
Select Networks
New
Entered “3 GPRS” as my ISP name
Modem Tab
New
Renamed connections to “3G”
Selected a modem: Cellular line (GPRS, 3G)
Next
Entered Access point name:
Next
Entered User name, and password
Clicked Advanced
Selected “Use specific IP address” and entered the IP
Servers Tab
Selected “Use specific server address” and entered both the DSN and Alt DSN
Ok
Finish
Soft Reset
However I still can’t connect!!!
Please if you can provide further direction; hopefully I’ve done something wrong…

Hi serjay,
Sorry for the wait I have been on short break to Kent so I have not managed to come back to you.
All I can think of when I did it on mine was I left Username and Password blank and the IP adress as well.
I am sorry I can not help you any further because I use a Nokia N95 as my mane phone now and not the PDA.

thank you Michael for your help thus far, I guess I'll keep on trying.
Thank you..

m1dul said:
All I can think of when I did it on mine was I left Username and Password blank and the IP adress as well.
Click to expand...
Click to collapse
It worked! I left the username, pass and ip address blank and it worked!! thank you very much!
However 3G on Uni is 5 times slower than on the iphone... a shame!

serjay said:
It worked! I left the username, pass and ip address blank and it worked!! thank you very much!
However 3G on Uni is 5 times slower than on the iphone... a shame!
Click to expand...
Click to collapse
Glad it worked for you.

serjay said:
It worked! I left the username, pass and ip address blank and it worked!! thank you very much!
However 3G on Uni is 5 times slower than on the iphone... a shame!
Click to expand...
Click to collapse
Well, you have to notice the Uni is 4 years older than Iphone, so.... it´s no too bad. Remember when Uni came out no other device can do all that Uni!!
Uni it´s like the grandpa of all the new devices, so we have it some respect as even some of the today devices are not as good as UNI

how to use hotmail?

Can anyone tell me how to check hotmail in G1 expect to check it by browser?
Someone told me to use the Moxier Mail.
But What is the Sever for hotmail??
And Why my Brower cannot go to www.hotmail.com in these days...
any one can help me figure out these problem???Thanks a lot

www.hotmail.com works fine for me.
Try google searching hotmail and clicking on the first result?

i dont know why.....
but i just wanna know....is there any application to use hotmail like gmail??of course...it is free...

Try m.msn.com in the browser.

What you can do is what i have done, and it is change your passport account settings.
You change your location to a European country [for me i chose france] ( on your control panel on msn or what not)
And then on your phone,
with the e-mail application, you input your email and password and then click manual setup instead of next.
-------
choose pop3
use these settings,
username: [email protected]
password: yourpassword
pop3 server: pop3.live.com (ssl always port 995)
----------
once you pass the pop3 section you will get to the smtp section:
username: [email protected]
password: yourpassword
smtp server: smtp.live.com (port 25 [tls or none, you should test both])
then you should be good.
When setting and using wifi at home, or work your smtp will not work, which means if you try sending e-mails via WiFi your message might not be sent, (most ISP's block their port 25 from usage [for spam reasons] and more money for them too)
so for that same reason while in smtp you might not be successful if you are not using the phone's web.
Hope this made sense. But it works.
---
also you can use this anywhere on any device and computer which you want to set up pop3 access.

Just set it up in Email (the stock Android software). It gives a warning about Plus accounts, but it finalizes fine. I was on wifi when I set it up, I think it has issues when setting up on 3G/GPRS.
Everything works, incl. alerts and all..

try the steps i have posted here
they worked for me and others
How to Forward Hotmail to Gmail Without paying!
http://allshadow.com/forum/viewtopic.php?f=9&t=4680

elmejor183 said:
What you can do is what i have done, and it is change your passport account settings.
You change your location to a European country [for me i chose france] ( on your control panel on msn or what not)
And then on your phone,
with the e-mail application, you input your email and password and then click manual setup instead of next.
-------
choose pop3
use these settings,
username: [email protected]
password: yourpassword
pop3 server: pop3.live.com (ssl always port 995)
----------
once you pass the pop3 section you will get to the smtp section:
username: [email protected]
password: yourpassword
smtp server: smtp.live.com (port 25 [tls or none, you should test both])
then you should be good.
When setting and using wifi at home, or work your smtp will not work, which means if you try sending e-mails via WiFi your message might not be sent, (most ISP's block their port 25 from usage [for spam reasons] and more money for them too)
so for that same reason while in smtp you might not be successful if you are not using the phone's web.
Hope this made sense. But it works.
---
also you can use this anywhere on any device and computer which you want to set up pop3 access.
Click to expand...
Click to collapse
This worked for me.

This is a great guide to get my Hotmail on my G1!..and it worked perfectly..
Is it completely free though? Even with the notifications?..
I hope so..this is making things A LOT easier that going to Hotmail in my browser..

i have to unlock my G1 if i want to change the location?
if not, how to change it?

jasoncook16 said:
i have to unlock my G1 if i want to change the location?
if not, how to change it?
Click to expand...
Click to collapse
You need to change your location in hotmail, not on the g1.

Wowowowow.....It is running perfectly....Thank You soooooo much^ ^
haha...im still a new user for G1 even though i have bought it for half an year...T.T

Yahoo email account setting

Yahoo POP3 transfer needs one to have a premium account (paid account) which many of us don't have. I couldn't find much information on the forum so I decided to post the setting in case someone else is looking for similar details. Sorry if this has been previously discussed.
1) From Application menu click on Email
2) Click on left button(settings) and click Add account
3) After you are done putting you information for username and password in, click on Manual Setup
4) Click on IMAP
5) For IMAP server: imap.mail.yahoo.com - Port: 143 leave the rest alone
6) For SMTP server: smtp.mail.yahoo.com - Port 587 leave the rest as they are.
7) Follow the steps per your preferences and you are done!
I hope I could help a bit.

Yahoo.com does that, Yahoo.(other country) will have pop3 access automatically.

I'm trying to configure my hotmail acount with no sucess...anybody knows how to do it please?

rogeriok said:
I'm trying to configure my hotmail acount with no sucess...anybody knows how to do it please?
Click to expand...
Click to collapse
See if the below setting can help:
POP server: pop3.live.com (Port 995)
POP SSL required? Yes
User name: Your Windows Live ID, for example [email protected]
Password: The password you usually use to sign in to Hotmail or Windows Live
SMTP server: smtp.live.com (Port 25)
Authentication required? Yes (this matches your POP username and password)
TLS/SSL required? Yes

Nimche said:
See if the below setting can help:
POP server: pop3.live.com (Port 995)
POP SSL required? Yes
User name: Your Windows Live ID, for example [email protected]
Password: The password you usually use to sign in to Hotmail or Windows Live
SMTP server: smtp.live.com (Port 25)
Authentication required? Yes (this matches your POP username and password)
TLS/SSL required? Yes
Click to expand...
Click to collapse
Thanks for reply,but this setings are not working"can't find this server"

Nimche said:
Yahoo POP3 transfer needs one to have a premium account (paid account) which many of us don't have. I couldn't find much information on the forum so I decided to post the setting in case someone else is looking for similar details. Sorry if this has been previously discussed.
1) From Application menu click on Email
2) Click on left button(settings) and click Add account
3) After you are done putting you information for username and password in, click on Manual Setup
4) Click on IMAP
5) For IMAP server: imap.mail.yahoo.com - Port: 143 leave the rest alone
6) For SMTP server: smtp.mail.yahoo.com - Port 587 leave the rest as they are.
7) Follow the steps per your preferences and you are done!
I hope I could help a bit.
Click to expand...
Click to collapse
is this push mail or pull mail?

Thank you so much omg i finally got rocketmail working

Setings for hotmail
I found in google the setings for hotmail acount and works to me
incoming settings
protocol =pop
pop server = pop3.live.com
security type =ssl
server port =995
outgoing settings
login required =ticked
username =hotmail addy ie [email protected]
smtp server=smtp.live.com
security type=tls
server port=587
Account name =Hotmail
Your Name =what ever you want it to display

Nimche said:
Yahoo POP3 transfer needs one to have a premium account (paid account) which many of us don't have. I couldn't find much information on the forum so I decided to post the setting in case someone else is looking for similar details. Sorry if this has been previously discussed.
1) From Application menu click on Email
2) Click on left button(settings) and click Add account
3) After you are done putting you information for username and password in, click on Manual Setup
4) Click on IMAP
5) For IMAP server: imap.mail.yahoo.com - Port: 143 leave the rest alone
6) For SMTP server: smtp.mail.yahoo.com - Port 587 leave the rest as they are.
7) Follow the steps per your preferences and you are done!
I hope I could help a bit.
Click to expand...
Click to collapse
Doesn't work on my x10...
I got the same message: "incorrect user name or password" after I put the IMAP server settings ang click Next
Any suggestions?

Hi, I managed to sort out my yahoo mail. It is however for *@yahoo.co.uk
Note that I'm on the regular Yahoo mail, not Plus or anything paid. However I am on the new yahoo interface as opposed to classic.
1. Log into your yahoo mail and click on "options" on the far right area of your screen
2. Select "More Options..."
3. Click on "Pop and Forwarding" on the left menu
4. Ensure "Allow your Yahoo Mail to be POPed" is selected.
Ok now onto your phone settings (change yahoo.co.uk to *.com where applicable).
Incoming Mail (POP3) Server: pop.mail.yahoo.co.uk
Outgoing Mail (SMTP) Server: smtp.mail.yahoo.co.uk (use authentication, optionally use port 587)
Account Name/Login Name: Your Yahoo! Mail ID (your email address without the "@yahoo.com")
Email Address: Your Yahoo! Mail address (e.g. [email protected])
Password: Your Yahoo! Mail password
Hope it helps