Did anyone get this working?
I have an XDA unlocked and using a PAYG Orange SIM, I have had GPRS switched on by Orange for the sim but still have problems.
I am using these settings:-
Modem type : Cellular Line (GPRS)
Baud rate : 19200
IP Address : Server assigned
Software compression : Off
Header Compression : Off
DNS : Server assigned
ALT DNS : Server assigned
WINS : Server assigned
ALT WINS : Server assigned
AccessPointName (APN): payginternet
Username : none
Password : none
Domain : none
I get a 'Connected' message comes up but no data and attempts to surf to any URL pause for a long long while and then come up as 'page could not be found'.
Any ideas anyone?
Any help much appreciated
Just installed the xda-developrs SE ROM
Seems to make the XDA run like a deamon, well impressed so far.
Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.
dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk
but something seems to be missing. Could somebody please supply the complete settings.
WAP...
Ehm, as far as WAP goes...
We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...
If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.
02 internet settings
Is this what you want?
Name: 02 Mobile Web
Select a Modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Access point name:
MOBILE.02.CO.UK
Name 02 MOBILE WEB GSM
Select a modem: Cellular line
Baud rate: 19200
Advanced:
Connection perferences:
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Country code: 44
Area number: 771
Phone number: 2932932
Name : 02 WAP GPRS
Select a modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name Servers:
Use server-assigned address
Access point: wap.02.co.uk
name: 02 WAP GSM (CSD)
Select a modem: Cellular Lime
Baud rate: 19200
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use server-assinged addresses
Country code: 44
Area number: 771
Phone number: 2927927
There ones I use my self
UK 02 XDA
Hi,
Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:
Username: web
Password: password
Domain: leave this blank.
Check the box to save the password.
Gil.
thanks, i will add it to my txt file
missed those
I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.
Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! Thanks.
Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.
Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.
Nobody in UK on O2 pay as you go :?: :?: :?:
Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.
cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here
OK, searched high and low and think this is the best thread to post this in.
Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.
I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.
One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.
Phone works and SMS is fine, just GPRS/GSM
Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:
Thanks
Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it
Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this
Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.
Click to expand...
Click to collapse
im on o2 online genie payg 300 free wap/txts per month.
i got my txts down to 200 and i get 25free mms per month instead
i got all wap/net working for free
just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:
settings are:
MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent
GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201
Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online
Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'
under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'
Untick 'wtls' secured connection.
Click on the 'MMS' settings tab next.
Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)
All the other settings can be setup as you like.
1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.
2) Install EZWAP2.5
3) EZWAP Settings for O2UK:
General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default
Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default
Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N
History/Cache & Identification - default
MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number
MMS Options - delivery recepit and read receipt Y
It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.
ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk
02
username: [email protected]
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk
Hotmail
username: [email protected]
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp
Hi there!
Has anyone been able to use SJPhone with voipbuster on any of these devices?
Thanks
i think that it works with these settings
Proxy domain: sip.voipbuster.com :5060
User domain: sip.voipbuster.com
STUN Server Address: stun.voipbuster.com :3478
Account: (My user name from Voipbuster)
Password: (my password from Voipbuster)
http://forum.xda-developers.com/viewtopic.php?t=36573&highlight=
works great for me:
just like the thread said:
use sip1.voipbuster.com leave port at 0
domain is voipbuster.com
stun is stun.voipbuster.com
ur set to go!
Hello,
Just wondering how you found out the settings from Voipbuster??
natee said:
Hello,
Just wondering how you found out the settings from Voipbuster??
Click to expand...
Click to collapse
the settings are on their page:
http://www.voipbuster.com/en/sip.html
more settings are on different voip sites/forums like www.voip-info.org , u just have to search the net and try and then search again and try again and then ... well, u get my point
Cool, thanks for the tip!
I read a previous post concerning this but I still need some help.
I am trying to get my MMS settings to work with suncom's service, here is my problem i think?
Suncom uses port 9201 and WAP 2.0 - when i set to port 9201 i get a default of WAP 1.2 and when I set to WAP 2.0 I get a default port of 8799.
Can someone please tell me how to change the port settings on the Hermes running WM5....I also have the same issue with an S710 running WM6.
Thanks in advance for your help.
changing the port settings on TyTn
I still have not figured out how to change the port settings but I did get MMS to work after much trial and error.
I hope this helps anyone that is working on this.
the settings that i haqve gotten to work after much trial and error are as follows.
make a new connection called "internet"
Cellular line GPRS
access point name: mobileinternet
user name, password, and domain are blank
and thats it.
MMS settings are:
create a server i called it suncom mms
gateway: 66.150.33.115
port:9201
server address: http://mms.suncom.net:8088/mms
connect via: i set to my isp (im not sure if this matters but it is working)
wap version: WAP 1.2
The wap version and port number are fixed on my phone. I have found that the port number is more inportant than the wap version.
I hope this helps.
wondered if anyone could help me, im trying to set up TIP in wm6, ive emailed tesco and theyve sent me the settings which are:
SIP Protocol
Domain: sip.tescointernetphone.com
Proxy Server Address: sip.tescointernetphone.com
Proxy Server Port: 5060
Registrar Server: sip.tescointernetphone.com
Registrar Server Port: 5060
Outbound Proxy: sip.tescointernetphone.com
Outbound Proxy Port: 5060
SIP Signalling Port: 5060
SIP Data Port: 5004
User ID / Authentication Name: Tesco Internet Phone Number
Authentication Password: Tesco Internet Phone password
ive entered them in using the sip config tool, i can now recieve calls but when i dial it says number may be invalid.
Any help would be great
Need help on the same thread
How do i set up VOIP using Tesco's VOIP service. The internet phone supplied by them is not a valid PPC application ! I'm based out of India and I get a lot of voicemails on my Tesco no. Would be great if i'm always connected
fring and tesco sip
being trying today and set user as phonenum of tip, pass as password set up, proxy as sip.tescointernetphone.com in fring, and it rings on incomming with caller id, but hangs up when answered, and out does not work, it hangs up before first ring. i assume it is not negotiating a audio codec stream channel between end points, but the sip protocol layer is working to inform.
i hope it does work soon, as it is a bit of a pain in the arse.
trying this at moment
http://wiki.xda-developers.com/index.php?pagename=VoIP_on_Windows_Mobile_6 and
ftp://xda:[email protected]/WM6VoIP.CAB
and
http://thinkabdul.com/2007/04/25/sip-config-loader-free-utility-to-automatically-configure-load-_setupxml-file-for-sip-voip-on-windows-mobile-60-device/
gets TIP available on a 3g network with data plan.
will try calls later after top up
no need for fring
Anyone else having any problems / luck getting this up and running?
I using these settings from the first post above, but get the "No Service" error on my device. sipgate settings work fine and I can use the same TIP settings in XDA-Lite without any problems at all!
Hi.
I have never tried to set up tesco on WM but have manged to get it to work on Symbian. The way I got it to work was to leave the proxy settings blank and just filled the registrar settings with 'sip.tescointernetphone.com'.
It was alot of trial and error. I'm sure you can do it.
Good luck.
Tesco Internet Phone
Had no luck with the voip in wm6, so been using this software, using tesco iax settings.
USER= Tesco Internet Phone Number
PASS= Tesco I.P Password
SERVER= gateway.tescointernetphone.com.
Not as nice looking as keypad ets in wm6 but works ok.
It used to work
I did get it working at one point, but it has been No Service for many months now.
PPC-IAX works
Just wondered about the other settings for input and output.
Tesco Internet Phone settings on fring
download fring on your mobile
register and then login
then click on sip
go down the list list and choose other
you will be asked to enter thefollowinguser:
ID enter your tescointernet phone number
eg 0207432****
password enter the passwrod for your tescointernetphone it is the same one as the one for the account .
proxy address type the following : sip:voicedot.net.uk.sbc.lon.uk.voicedot.net
enjoy tescointernetphone on your mobile
the good thing about fring it can connect you via 3g connection or a wi fi connection . 3g connection is better quality but you need tocheck with your phone provider if they will charge you for the data use
http://www.fring.com/fring_is/why_fring/
goodluck