Database Users

Selective Install on XDA Exec

Hi peeps.
After reading through various posts on this board, I thought I would hard resst my exec and install the cabs manually as suggested to get the features I want without the bloatware.
So far so good, installed everything I wanted and the connections only cab that is availble but, my MMS doesn't seem to work.
There is no MMS account in poutlook and there's noway that I can see of composing new MMS messages.
How does everyone else go on with this because when I've looked through some of the posts, everyone says thier SMS is working OK.
It's probably something stupid... :roll:
Cheers,
Smiff.

See? That's what happens when you don't proof-read your posts - there's loads of spelling mistooks and typos; and then no-one responds.
But seriously, someone else must have seen this as I'm not the only one to do a minimal install. Any ideas?
Cheers,
Smiff.

Answers in this thread for the cab file to install.
http://forum.xda-developers.com/viewtopic.php?t=32527

I've read that one multiple times but still have no working MMS in this situation...

I THINK
I beleive you have to create new account. It appears to be setting up email just continue through and at some point you can select type and set to mms. Then highlight account click on settings and put in your providers mms setting and bingo...
must say I havent had this problem on the exec but did on xdaiis and that solved it..
hope that helps
stay happy
magpie2000k

Hi
Thanks for the tip but unfortunately, it didn't work that way
However, I have managed to get it working now - i did a hard reset again and a clean install and then installed 5 cabs - voicemail one, bt patch, both "shortcut" ones and the uaprof one.
The only thing I did differently this time from all the others is that I switched it off with the power button and on again before soft resetting it - i'm pretty sure that this did the trick
Cheers,
Smiff.

OK tried everything

I basically bought a brand new wizard from O2 in Uk, hard reset it, reset when "starting customisation", installed "show ext rom cab" and got rid of all that crap.
got everything working on the pda, software installed, but I CANNOT get MMS to work.
Ive tried cabs off here, inputting manual settings, and I cant get it to work.
Im thnking maybe I need to install something else? Ive got "MMS Configuration..." under the different account menu, which is maybe mms composer? I go to about and it says "mms composer v3.0.7.14" but there is nowhere i can DESIGN an mms???
I had this problem on my old compact when I went bigstorage.
ANYONE HELP
thanks by the way, great site.

why don't you install the I-Mate rom instead - and then just delete the antivirus and skype - so that you have a nice and clean install which works really fast (from experience) - and also works with mms 100%?

surely there is an easier way than reflashing the device with a new rom.
I've got this just as I want it bar the mms.

well it's your business ... however... when you hit the reset button to "get rid of the crap"... you might have prevented some patches from being installed - and sometimes these patches are important for stable functionality.
In any case, I agree that there must be a way to get the MMS working without flashing the ROM, however I just feel that the I-Mate rom without hitting the reset during boot and with all the patches - will probably serve you better.
However, I wish you luck with your current ROM.

Somebody said the only benefit of flashing a k-Jam Rom on was the wifi G. Not so, after you have done the extended ROM thing on the K-JAM Rom, you have about 5mb more space, and none of the T-Mob rubbish like that horrible pink dialer. The Camera appears to be slightly better too.

stuhyde said:
I basically bought a brand new wizard from O2 in Uk, hard reset it, reset when "starting customisation", installed "show ext rom cab" and got rid of all that crap.
got everything working on the pda, software installed, but I CANNOT get MMS to work.
Ive tried cabs off here, inputting manual settings, and I cant get it to work.
Im thnking maybe I need to install something else? Ive got "MMS Configuration..." under the different account menu, which is maybe mms composer? I go to about and it says "mms composer v3.0.7.14" but there is nowhere i can DESIGN an mms???
I had this problem on my old compact when I went bigstorage.
ANYONE HELP
thanks by the way, great site.
Click to expand...
Click to collapse
Don't do a reset when the O2 extended rom kicks in, let in run and choose a "Basic" install at the menu. You get all the O2 conectivity and MMS App but no O2 active or anything. it does install a couple of O2 apps that you can remove later.
Oh, there are a couple of O2 items in the start up you need to remove as well.
Not perfect but probably an easier option if like me you couldn't be doing with the hassle of a full reflash

well, ive got no o2 cabs on the device anymore, only stuff like resco and the likes in its place :lol:
but I made a copy of all the cabs, does anyone know what they are?
And which ones people would recommend to install
THANKS!!!!!
AutoRun.exe
CAB-Customization-O2UK-Wizard-01-05-05Oct05XML.CAB
CAB-Shortcut-MMS1-JAVA5XX-VOICE-O2-31Oct05.CAB
Config.txt
PhoneLight_Skin_O2_WWE_1005.CAB
Rilgsm_STK.sa.CAB
Signed_DiscoButton_16.sa.CAB
Signed_O2UK_103040101_RingTone.sa.cab
Signed_O2UK_exception.sa.CAB
Signed_O2UK_Region_Customize.sa.CAB
signed_Prodigy_o2AUI4_build26.cab
Signed_Remove_BatteryIcon.sa.CAB
Signed_UA.sa.CAB
Signed_Version.sa.CAB
Signed_WIZ_O2UK_PIE_homepage.sa.CAB
SmartDialing_enable_0915_signed.CAB
STK_Service.sa.CAB

Update please
Hello
I am in the same situation as you!
Have done a hard reset to get rid of the o2 crap which makes the machine run loads better.
I have everything back to how I want it except the MMS function.
How did you solve your dilema?
Thanks

Me as well, any way to get the MMS accont back?

I had a similar problem of not being able to send MMS, but never have done and found out 6 months later that O2 hadnt set it up on my account !!!
Worth a check

I had a similar problem of not being able to send MMS, but never have done and found out 6 months later that O" hadnt set it up on my account !!!
Worth a check

I found this useful:
http://forum.xda-developers.com/viewtopic.php?t=43176

Rogers Canada Cab for GPRS & MMS

I created this Cab originally for myself and I have had some requests for it so here it is. If there are any issues please direct them here and I will look into them.
If people are interested I will soon include a cab with the MMS at default 600k, let me know.
Before Installing cab make sure that you delete your old settings first!
Enjoy!
New Cab for VPN users, settings from mangopudding. I don't use these settings, just made the changes from the settings provided.

Grabbed it, thanks!

nice job lurch i will send people to this file next time I am asked. I will check it out to see which server addy u are using.. apparantly there is a different one these days, with the new vision stuff out

y2whisper said:
nice job lurch i will send people to this file next time I am asked. I will check it out to see which server addy u are using.. apparantly there is a different one these days, with the new vision stuff out
Click to expand...
Click to collapse
The new vision stuff isn't on here, the guy that was doing the testing for that for me went on vacation for a month so I haven't been able to finish that off.
I will keep looking into though.
If you have the base settings or anybody else pm me with them, I will get it done sooner that way.

hi lurch how yu doing. i installed the cab and had already manually entered the settings. my problem is recieving ppicture messaging. i can send but not able to recieve any at all. i'm using the softbank x01ht. do u know a solution that could fix this

Mr-R said:
hi lurch how yu doing. i installed the cab and had already manually entered the settings. my problem is recieving ppicture messaging. i can send but not able to recieve any at all. i'm using the softbank x01ht. do u know a solution that could fix this
Click to expand...
Click to collapse
Have you manually gone in to look at the settings?
If you have let me know what the differences are from what you entered manually, It is possible that the MMS settings didn't completly override the old settings.

ok do forgive for the little naivety that will be displayed...i check in connections and everything is supposedly set up correctly according to the stettings you had written before you made the cab...i also setup the server when i'm gettin ready to send a mms message...just so you know i'm using the new black shadow rom with radio 1.43 is there somewhere else i'm suppose to make changes...when i go to manage existing connections, do i have to setup anything under proxy settings

Mr-R said:
ok do forgive for the little naivety that will be displayed...i check in connections and everything is supposedly set up correctly according to the stettings you had written before you made the cab...i also setup the server when i'm gettin ready to send a mms message...just so you know i'm using the new black shadow rom with radio 1.43 is there somewhere else i'm suppose to make changes...when i go to manage existing connections, do i have to setup anything under proxy settings
Click to expand...
Click to collapse
No leave the proxy settings alone.
Go to messages, SMS/MMS (forgot you had Shadow running), options, click on MMS, and then the servers tab at the bottom, you should only see one thing there highlighted "Rogers MMS"
If you don't let me know. Or if there is 2 different ones there tell me what they are.

Lurch3559 said:
No leave the proxy settings alone.
Go to messages, SMS/MMS (forgot you had Shadow running), options, click on MMS, and then the servers tab at the bottom, you should only see one thing there highlighted "Rogers MMS"
If you don't let me know. Or if there is 2 different ones there tell me what they are.
Click to expand...
Click to collapse
i'm only seeing one that says mms rogers....i'm guessin thats from your cab. i erased the one i had entered

ok this is what i'm going to do...i'm going to reset my phone...hard reset and then start from scratch...i didnt add nothing else so i odn't mind...then maybe you can walk me through it then if possible

ok phone has been resetted and ready to start from scratch

Mr-R said:
i'm only seeing one that says mms rogers....i'm guessin thats from your cab. i erased the one i had entered
Click to expand...
Click to collapse
Here's a long shot but have you went to send and receive.
Doesn't make any sense?
I had to try myself on the 17745 build, I sent a message to myself and I received no problem.
Is the problem on the other sending end, send one to yourself, make sure that you put in the number like this 9995554444, no prefix and you have to have the area code in there which in my example is "999".
Sorry that I am writing all this out but there are people out there that don't know this and I am making sure that I am being very clear.

Hard reset works to.
I guess you don't want to waste time.
I am at work, but the PC is on, I usually get the messages fast so I will get you through this.
Once you are up and running install the cab file, no need to hard reset, then send yourself a MMS, look at my previous post. tell me if you get it, you will probably get a screen saying that a download is there, click download anyway.

Lurch3559 said:
Here's a long shot but have you went to send and receive.
Doesn't make any sense?
I had to try myself on the 17745 build, I sent a message to myself and I received no problem.
Is the problem on the other sending end, send one to yourself, make sure that you put in the number like this 9995554444, no prefix and you have to have the area code in there which in my example is "999".
Sorry that I am writing all this out but there are people out there that don't know this and I am making sure that I am being very clear.
Click to expand...
Click to collapse
no worries i understand what you mean...
ok i ran your cab and sent a message to myself...the message was sent but not recieve as usual..the problem is send and recieve is not highlighted either...
i'm in toronto so i added my 416xxxoooo

Mr-R said:
no worries i understand what you mean...
ok i ran your cab and sent a message to myself...the message was sent but not recieve as usual..the problem is send and recieve is not highlighted either...
i'm in toronto so i added my 416xxxoooo
Click to expand...
Click to collapse
Where did you get the other settings that you were using?

also there was a time before i did so much flashing that i was able to recieve the messages after playing with it for a while...i feel like i'm missing something but can't remember what i did back then.

Lurch3559 said:
Where did you get the other settings that you were using?
Click to expand...
Click to collapse
i was using the one you wrote before you created the cab...i only notice the cab today

Mr-R said:
i was using the one you wrote before you created the cab...i only notice the cab today
Click to expand...
Click to collapse
The settings are absolutly identical.
Question did you have any issues before you changed ROM's.

Lurch3559 said:
The settings are absolutly identical.
Question did you have any issues before you changed ROM's.
Click to expand...
Click to collapse
if i'm not mistaken i was able to send it on the wm5 but think the problem occurred when flashed to wm6...i've only been using black roms so far, there was one time when send/recieve was highlighted but i use to get error synchronizing back then asi notice some people did also but now its just not highlighted at all...other than that no problems

Mr-R said:
if i'm not mistaken i was able to send it on the wm5 but think the problem occurred when flashed to wm6...i've only been using black roms so far, there was one time when send/recieve was highlighted but i use to get error synchronizing back then asi notice some people did also but now its just not highlighted at all...other than that no problems
Click to expand...
Click to collapse
Right now all that I can suggest is to try and manually install the MMS, go to the settings and delete the MMS Rogers that is there and make a new one, you shouldn't have to change the connection settings, and see if send and receive will highlight.

hutchinson 3G sms settings

as per title above, does anyone know the 3 network sms settings for xda orbit 2? im using bepes opera edition.

I am on hutchingson 3g. Just use the HTC connection setup wizard tool it works fine.
Then if you want to go further edit your browser ID to nokia N95 and you can access all the 3 video content etc

orbit_noob said:
as per title above, does anyone know the 3 network sms settings for xda orbit 2? im using bepes opera edition.
Click to expand...
Click to collapse
Try this my friend... it sets up the 3 network settings for you!
View attachment 3UK.CAB

thanks for all for your help but I still cant send any sms messages only reciever them. Its says 'your text message cannot be sent'.
What am I doing wrong I've tried both the connection wizard and the .cab file but its still not working?

orbit_noob said:
thanks for all for your help but I still cant send any sms messages only reciever them. Its says 'your text message cannot be sent'.
What am I doing wrong I've tried both the connection wizard and the .cab file but its still not working?
Click to expand...
Click to collapse
Seems like the sms message centre number has changed - it should be: +447782000800
I cant seem to find were to change the number though, hope someone else can help?

someone must know, help help!

someone must know, i tried calling three, but the indian call centre, suggested i go to a three store. thats miles away

have you checked your sms service center number.
Go to settings then phone. Then services. The voicemail and text messages. Click get settings and let us know what service number you have in

This is the number already in the settings +447782000800. So everything should work, but it doesnt.
So all you dont have any problems sending text using 3 network?
Why is mine like this

i found the problem. after 3 months of no ability to text, numerous calls to the indian call centre, and countless hours on the forums looking for the answer. heres what fixed mine:
under advanced network settings i changed the sms txt to GSM rather than GPRS.
so simple in the end, a big thanks to all who have previously tried to help me. I holpe this may help others out there who might have the same problem.
im off to send some txt to my friends now haha

TF3D Voicemail Message

Hello!
I've purchased a Touch HD a couple of weeks ago.
But I have a problem with the notification on TF3D homescreen saying there's one new voicemail message.
When I call voicemail, listen to the message, delete it, the notification does not go away.
I've searched the forums, and the solution to call myself and leave a message and then delete it does not fix the problem.
Also a soft reset does not make it dissappear.
Is there a register hack to remove the message?
Or something else I can do to make it go away?
H.

this is a bug - mine is doing the same thing.

And there's nothing we can do to solve it?
H.

Not sure if this will help but I had the same problem with an old wm device. The trick was to listen to the message, delete it/save it then wait a couple of seconds before hanging up.

similar problems with my old hermes and the problem was to do with sms_providers.dll file.
I had to replace this file.
Do a search in hermes directory

I think this may be due to the phone not being correctly setup for the network. I've had this on other WM handsets after flashing the ROM - and sorted the problem by installing the correct settings for the network, otherwise I'd get these kind of problems and sometimes strange SMSs with control characters in them.
Try going to "Connection Setup" in Settings -> Connections and resetting to the correct network & country.
Hope that helps.

dsm52 said:
I think this may be due to the phone not being correctly setup for the network. I've had this on other WM handsets after flashing the ROM - and sorted the problem by installing the correct settings for the network, otherwise I'd get these kind of problems and sometimes strange SMSs with control characters in them.
Try going to "Connection Setup" in Settings -> Connections and resetting to the correct network & country.
Hope that helps.
Click to expand...
Click to collapse
lol - of course its set up for the correct network. I made sure it was one of the first things I did!

Well, tried the solution with the sms_providers.dll change, but no luck.
Actually I don't think that was going to work anyway because I don't get weird text messages saying new voicemail.
That works just fine. The only problem I have is that it displays the 1 one voicemail message in between the call info and the calendar on my home screen. And what I try, it just won't go away.
I've also tried to reset the connection setting, but that didn't help also.
I'm going nuts about this!
Is no one else having this issue?
For your info, it's a dutch official rom version.
H.

Also when I leave myself 2 voicemails it still displays 1 new voicemail message.
It appears to be stuck.
Is there a registry setting for tf3d to remove this or something??
H.

Ok,
I've done a hard reset and the notification is gone now.
Hopefully it's not coming back anymore!
Thankz for all your help!
H.

h.vanleeuwen said:
Ok,
I've done a hard reset and the notification is gone now.
Hopefully it's not coming back anymore!
Thankz for all your help!
H.
Click to expand...
Click to collapse
Has the notification come back? I have the same problem with my new WWE official ROM.
Thanks dhatw.

dhatw said:
Has the notification come back? I have the same problem with my new WWE official ROM.
Thanks dhatw.
Click to expand...
Click to collapse
Okay, I just sent myself a voicemail and when I retreived it I deleted it and waited until the voice said deleted and then I pushed * to exit and now the notification is gone from my screen. I don't know if I had to do all of that but it worked anyways.

Registry Fix to Clear Voicemail Indicator
Using any registry editor go to the following keys
HKEY_CURRENT_USER/System/State/Messages/vmail/Line1/Unread
HKEY_CURRENT_USER/System/State/Messages/vmail/Line2/Unread
Display values and change Count value back to zero.
Worked like a charm!
HTC TyTN (a.k.a HERMES)
Windows Mobile 6.1 (CRC's ROM)