my jasjar is freezed at the blue screen at startap it gives me the rom number and stops i tryed to hard rsest and i reinslaled the rom but its stil the same please heeeeelllp me
Related
Please could someone help me in removing the O2 Startup logo, I have completed wiped the extended rom, but I still get the o2 startup logo. PLease help.
tomcullen1 said:
Please could someone help me in removing the O2 Startup logo, I have completed wiped the extended rom, but I still get the o2 startup logo. PLease help.
Click to expand...
Click to collapse
Bootscreen was bulding in CE ROM , no way to change now , I think Buzz can do that , just wait for him , he just make Extended rom unlocker, maybe a fews days we can see that
I have removed or changed the start-up logo from the Extended ROM before, I didn't know it is impossible. If that be the case, I am sure Buzz would be able to fix that. He da man!
use your file explorer and go into my devies/windows/startup/and delete the o2 connections that is in there. that will remove the o2 logo but you will have to keep doing this everytime you hard reset the exec
there is no o2 connection
I had my EXEC/uni stoped at the o2 boot image and freezed. so I used the varios methods here for updating the rom and the screen is with colors fuzzy colors , very strange ... so any one can help me please.
I can enter boot loader I dont know what rom I had... I am in Portugal so dont have O2 support
thanks
Have you successfully loaded the ROM even once?
I loaded the rom, then the congratulation screen apeared and I made the hard reset and the fuzzy colors apear... i am getting a little bit scared. it was working yesterday night and today.... freezed the boot.... i tried 3 difrent roms the qtek rom in the cd, in the webpage (my-xda), a rom from qtek in portuguese didnt work.
the light doesn't lit when I plug the wall charger... and I am affraid of use all the battery in the process of loading the roms...
I solved the problem installing the wm6 rom on it. and now it boots
me beri gapppy lol
Hello, i tried to install wm6 on my qtek 9100, first i have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613 , but the wizard_love rom failed, and then i CID unlocked my phone and that worked fine but then when i tried to install T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130..._ship.exe.html an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues. So i installed button_rom again from the gudie and the install worked fine, but when i restarted my phone i gets stuck in bootladder screen (not the 3 colored screen) and there are IPL/SPL 1.01 but i dont came any longer, i tried to reinstall button rom but it´s the same thing, i get stuck and my phone wont go in to windows...
What shall i do??? pleease help me i have just buy this phone for 400 dollars, so i must make it work again, the best is if i get the orginal swedish rom for my qtek 9100 pleeeease help me please
Sincerly yours// Johan
Edit: almost every rom i try to install, it gets stuck and a error message comes upp: Error 326 ( i think) please check your NBF file or something like that, what is the NBF file? and how do i fix it?
Hi
I have a Dopod with the following symptoms
It starts up and gets hung in the Dopod flash screen. Just hangs there and does nothing
It can be soft booted into bootloader ver 1.09
Can be hard reset - gets grey screen - press R on keyboard then space and it takes you back to splach Dopod screen fine
Tried to update to SP7 But gets com error 260 and wont go any further
Tried several ROMS and gets to load screen 1% then gets comm error 260 etc
Driving me mad - it should be salvageable but I cant seem to get it correct
Please help if you have ideas
Kind regards
John
Hi
Ok did some more reading and fixed it by reloading the original early ROM and going from there
All good now!!
John
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!