Removing the O2 Startup Logo - JASJAR, XDA Exec, MDA Pro General

Please could someone help me in removing the O2 Startup logo, I have completed wiped the extended rom, but I still get the o2 startup logo. PLease help.

tomcullen1 said:
Please could someone help me in removing the O2 Startup logo, I have completed wiped the extended rom, but I still get the o2 startup logo. PLease help.
Click to expand...
Click to collapse
Bootscreen was bulding in CE ROM , no way to change now , I think Buzz can do that , just wait for him , he just make Extended rom unlocker, maybe a fews days we can see that

I have removed or changed the start-up logo from the Extended ROM before, I didn't know it is impossible. If that be the case, I am sure Buzz would be able to fix that. He da man!

use your file explorer and go into my devies/windows/startup/and delete the o2 connections that is in there. that will remove the o2 logo but you will have to keep doing this everytime you hard reset the exec

there is no o2 connection

Related

startup logo same after reset!?

i used to get the qtek logo on a reset, i installed the tmobile config cabs as im on that network.
now even after a hard reset the tmobile background is still there! how is this possible?
it's normal and happened to me... just go to this thread and download any startup logo u want here
PapaDocta said:
it's normal and happened to me... just go to this thread and download any startup logo u want here
Click to expand...
Click to collapse
nice one, i was searching for the wrong words!

desperated

hello. i have an o2 i-mate jasjar phone. i updated my rom and since then my phone wont start up.
i tried going into bootloader mode and re-installing any rom that i could find with that mtty program, even with the original rom, the
the rom installs just fine, but when i do the hard reset the phone goes up to the start up screen showing
the rom info and just stays there.
i also updated the bootloader from v1.00 to v1.01 to see if that fixes anything but no luck.
does anyone have a clue of what is going on?
p.s when i connect the phone with ac power the led that shows if the phone is charging wont light up. dunno why! :S
PLEASE HELP ME!!!
does anyone has a clue of whats going on???
i really need some help here please!!
there are some progs on wiki. Instructions for those stuck on bootscreen.
i am not stuck on boot screen. i am stuck on the screen that shows the ram info, i think its called splash screen....
can somebody help me?

New Rom Installed Blocked My Pda

Hi,
I am writing because I have some problem with my Qtek S200.
I have downoladed on this site a new ROM wm6pdamobile, I have installed it, and now my pda is blocked on a white screen.
When it starts appears the normal HTC page, the check of OS, GSM etc., and then.... nothing... only a white screen.
What I can do?
How I can format my pda? It doesn't works with active sync, because it can't take a valid IP, and so I can't reinstall a precedent ROM version.
Please help Me!!!!
Thanks
It is important to hard-reset your device after upgrading. Have you done hard reset? If not do it.
mine oso
i have installed WM6
i had hard reset..
but.. it goes to Align Screen
and stuck !!!
looool, u must reinstall a new rom.. dont ask me how..

plz help Sp3i freeze on wm splashscreen & cant reflash by USB

my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Your phone can be reflashed with Mtty even when it freeze on the boot screen cause its not necesary have the phone ON.
Tried to do a hard reset maybe is a windows registry problem.. after the hard reset the values on registry will be reset to default.
already done that, and doesnt work, even it reflashes through USB but afther reaching 100% the phone restarts and get stuck again in the same place, no matter if I hard Reset or reflash by USB the phone still get freeze.
can any one tell me how to delete all the data on the memory to make a clean reflash? or how do I reupload the firmware? is there a way to recover the phone?
remember I already install the WM5 and back to WM2003SE but after that the problem started, maybe i screw someting wile doing it?
Solaris_irc said:
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Click to expand...
Click to collapse
Tutorial for sd flash
Check here

Skin Is Not Loaded :(

hi my friends.
I changed my jasjar's tomal 6.1 rom to Original WM5 for sell my phone
but after changing rom, i have a terrible problem.
when i closed the battery for change the simcard and turn it on. when the windows logo appears a blue screen showed and the gsm led begin to work (blinker).
after several soft resets the windows starts and ready to work but when i press the power button to standby the device (sometimes) for turn on the device (after standby) the screen didn't appear.!!
i'm very upset
after that i flashing the radio to newer version (1.18) and flash back to WM6.1 TOmal , WM6 , ... but i still have this problem.
in the tomal's wm6.1 rom (TML_v82_WM61_19960) before the problem shown an error appears under the windows logo > The Skin Is Not Loaded < and after that a black or blue screen appears and nothing...
please help me to fix it.
thanks friends
No Answer ?!
Really ?!
it's very important for me.
plz help
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
-Jonny- said:
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
Click to expand...
Click to collapse
What is the mtty ? doc-format ?
How can i do it ?
tnx for attention
DOC format
-Jonny- said:
DOC format
Click to expand...
Click to collapse
wow , thanks for guide me.
as your experiences , this work would be harmful for the device ?
thankx
It's not harmful - basically it totally wipes the device removing everything (including garbage). So you will, of course, need to flash a ROM afterwards.

Categories

Resources