come on guys, any of you who might know how I get the blocked comport problem using gps nagivation fixed when i use the blootooth stack? very unfortunate side effect.
when i do a hard reset leaving the stack uninstalled navigation works fine again.
help me out i LOVE this stack;-)
Related
Like the topic says, my BT all of sudden stop working ever since i install the gps software and synced the gps with my xda II. I uninstalled the GPS but still isnt working, im using the bT belkin gps which looks like a rebranded fortuna one. My BT was fine until this. I wanna avoid doing a hard reset but I cant figure out a solution to this. Anybody know how to reinstall the BT stuff?
Hi all, I bought a Qtek S100 and tried to connect it with my BT GPS receiver (Falcom Navi 1). It didn't work properly and I suddely lost te BT icon on the lower right hand side of the S100. It hasn't re-appeared even after several soft resets?
Does the S100 have the sae BT problems with GPS as the xdaII had?
I use BT GPS and the only problem so far is that I have to re-pair them sometimes.
Try Start->Settings->Connections->Bluetooth to get to the same screen as you would get to by clicking the BT icon.
THanks for the reply. Which BT GPS do you use? and with what Navigation program?
Holux GR-231 and TomTom3.
I am having problem with Bluetooth GPS as well. I have 2, one is iTrek Bluetooth GPS and one is ArcoreTech Bluetooth GPS.
Since I have tried both GPS units, I am pretty sure it's i-Mate JAM's Bluetooth problem.
Instead of upgrading my ROM to 1.06.00 WWE, I should have tried it out with version 1.03 first. I upgraded from 1.03 to 1.06 as soon as my JAM finished charging. BIG MISTAKE!
I ended up usiing "Pocket Bluetooth Tool" to designate COM8 (for example) for my GPS. However, if I happen to soft reset or turn of Bluetooth, I would have to pair it again.
I read many article's on the internet and the problem seems to point to the MS Bluetooth stack (instead of Widcomm used in my i-Mate PDA2K - and by the way PDA2K works perfectly with my GPS units).
Hopefuly i-Mate will address this problem during the next ROM update.
So how come Loboman's holux works ok?
Loboman are you using a different BT stack?
I would like to guess that he uses ROM version 1.03...
Jazzedout said:
So how come Loboman's holux works ok?
Loboman are you using a different BT stack?
Click to expand...
Click to collapse
I use 1.06.00. All i do is that I tap on the BT icon, choose 'Devices', tap 'New...' and waits until the phone finds the GPS. Then I add it and pair it with the passkey. Then I had to scan all serial ports using a program that Holux supplies (I bet it works with any BT reciever though) to find out that my port was COM5 and finally I set my programs to use COM5. As I previously stated, I do have to re-pair them sometimes for some reason, but I can live with that.
I previously had an Acore unit which worked ok with my iPAQ 5450 (also MS BT stack) in WM2003. It took me all the way from northern Sweden to Barcelona in Spain last summer
I have not used Pocket Bluetooth Tool, but I have read about it. I think that it works without it so far. I also leave my BT on 24/7 since I don't think that it uses too much battery.
I hope things work out for you.
Absolutley no problems with Rom 1.01.01 Ger and Navilock BT-308 GPS-Mouse
I am not sure if the following has anything to do with Bluetooth but at least it cured my Bluetooth vs. GPS problem, for now.
On Club i-Mate's ROM update page, I found out that if the radio version is 1.10, then I am NOT suppose to apply the camera patch. After I uninstalled it, my JAM seems to work better with Bluetooth GPS units. My biggest problems were:
1. Once I soft reset my JAM, I have to re-pair my GPS units.
2. PrymeNav software took a long time to scan for GPS - and crashes sometimes when I designate already-scanned port.
3. Unable to hold two paired GPS units in Bluetooth Device List (though only used on at a time).
I have played with it after I uninstalled the camera patch and to this morning my GPS units still function well. Another key is to turn on the GPS unit and make sure it is linked (as indicated by its LED) - then turn on the GPS software. That way the hardwares are ensured to be linked.
As a side bonus, now I can perform Bluetooth Activesync on my Mac (via PocketMac software). However, I still require Pocket Bluetooth Tool installed on my JAM.
Weird!
Can anyone help with this,
I have an O2 Exec (Latest O2 ROM etc)
I have a Bluetooth GPS & Bluetooth Headset, when using the GPS, if a call comes in I can answer it on the headset, but the GPS goes all screwy, starts losing position, even after the call is ended the GPS is erratic
I have installed Buzzs Bluetooth Patch, and no effect,
Its a bit of a pain if I can't use a Bluetooth headset and GPS at the same time.
Anyone had this and found a cure?.
EXEC, Details are
1.13.82 WWE
11/30/05
1.04.02
42.37.P8
1.13.118 WWE
Help appreciated
Thanks
Richard
Richard im on the same rom as you but without the bt patch and ive no problems
alix776,
I will try it again later on, I had the problem before I installed the patch, so I installed it to see if it cured it, but it didn't
I will do a hard rest later and start from scratch again, see if that helps,
I didn't have any problems using the same BT Headset on an XDA 2i, so assumed it would work ok on the EXEC, the only change to the setup is the GPS unit, I am using a really cheap and cruddy £30 jobbie off ebay (Its only 8 Ch, and seems a bit flaky!),
I will have a new Sirf3 unit arriving in a few days, so can try that to see if the problem is with the cheap BT GPS!.
I need to get a solution sorted in the next 10 days before going back to work in the US, or I will have to take the TTOne with me if I can't get this setup working 100%
Cheers
Richard
Alix
I just tried it again from a hard reset and the same problem
GPS works fine till I answer a call, then It stalls and loses GPS Position till I hang up, then GPS connects again but there is massive lag and the Map is nowhere near its true position,
Not cured until you exit TT and restart,
How did you install TT, I copied the cabs across and installed from the SD, I paired the GPS and set it to COM0, then in TT5 selected Other Bluetooth GPS and COM0.. am I doing something wrong with the way I am trying to get it installed
This has always worked on all the other systems I have used!
Cheers
Richard
I have the same problem and other...
I have the same problem when using Tom Tom ,if I pick a call with my BT headset the gps lost the position and when I close the phone call TT says No GPS device.......it restarts by himself after few mins , but the position is uncorrect, it has like a sort of delay, the arrow on the display "follows me" 2 or 3 Km behind.
So, mi car is quite fast..but be faster than a navigation device is very funny...
Btw my gps antena is an Hamlet HBTGPS
Other problem I have is that Tomtom 5.21 don't allow me to use my TT5.00 maps,it only see Italy ,Iberia and UK...
I think I will get Navigon asap....
Bye...
just a thought have you tried formating the storage card and reinstalling the map just back it up first in using a sirf3 apos and jabra 250v headset ive also used a ttmk2 bt receiver with no probs either
Same here
I am also getting this issue on an SPW M5000, flashed to the Imate test rom. I don't know if it was happening before on the original (crappy) orange rom that it shipped with as I had to upgrade my GPS to a bluetooth from a mouse.
It is a real pain not being able to use them both together and I'm tied to the phone with a wire at the minute.
Any help on this issue would be greatly appreciated.
Hi All
I have the above setup and am having a nightmare trying to get the bluetooth GPS to work. I have tried every setting I can find and even upgraded the ROM to 1.90.96 to see if that helped but still no joy. Basically whichever COM port I assign 0,4,5 or 8 (the only options allowed) it shows up in the "Other Bluetooth GPS receiver" catergory in TT6 but it will not connect. I have also noticed that the only time the BT LED on the Holox device flashes is during the initial pairing with the jasjar, before the device default password "0000" is added. Once this function has been completed tthe light remains solid and tt6 does not recieve the gps signal.
I know the Holox unit and the TT6 is working fine as I have tried it on an old HP 1940 with wm2003 and it works perfectly.
Has anyone got any ideas, suggestions or experienced the same problems
When you set up the Pairing with the GPS receiver use COM0 and select the serial port. Once this is done, set up a new outgoing COM port and make sure that the "Enable secure connection" box IS NOT checked. My Exec never works with any BT GPS receivers if this box is checked.
Then in Tomtom set use other BT GPS receiver and select COM0.
Pug.
Hi Pug
No joy I'm afraid. Have tried this more times than i care to mention but TT^ will not recognise the gps device.
Sounds like a problem with your BT stack then. If it worked on your other device then it's obviously a problem with the Uni. Seen as this isn't a common problem, might be some problem with your setup. Thinking about it now, Tomtom overwrites some BT files during install, as you seem to be using an AKU3.2 ROM which will have updated BT stack, try deleting these from the windows folder.
ttn6bt2003.dll
BtCoreIf.dll
BtSdkCE30.dll
If it doesn't work, you can always re-install TT6
Big G said:
Hi All
I have the above setup and am having a nightmare trying to get the bluetooth GPS to work. I have tried every setting I can find and even upgraded the ROM to 1.90.96 to see if that helped but still no joy. Basically whichever COM port I assign 0,4,5 or 8 (the only options allowed) it shows up in the "Other Bluetooth GPS receiver" catergory in TT6 but it will not connect. I have also noticed that the only time the BT LED on the Holox device flashes is during the initial pairing with the jasjar, before the device default password "0000" is added. Once this function has been completed tthe light remains solid and tt6 does not recieve the gps signal.
I know the Holox unit and the TT6 is working fine as I have tried it on an old HP 1940 with wm2003 and it works perfectly.
Has anyone got any ideas, suggestions or experienced the same problems
Click to expand...
Click to collapse
Try reading here:http://forum.xda-developers.com/showthread.php?t=283253
That should sort it.
Mav
Still No joy with Jasjar, Holox BT-321 GPS & Tomtom 6
Hi All
I've tried all fixes for the above problem suggested by pug and mavrik64 earlier on this thread but without success. This is a little frustrating to say the least. The Jasjar has had clean install with nothing loaded other than the default programs included with the latest ROM build 1.90.96 from Jwrightmcps, the UK 'O2' setup and TomTom 6. As I know the software and Holox unit work fine on my old HP1940 running on wm2003, I'm convinced it is something in WM5 that is giving me the problem. I have read other forums were other people appear to have similar problems.
Please note; the main reason I flashed the ROM from that previously installed 1.30.76 was to try and find a fix for this problem. The older version gave me exactly the same problem.
Anyone got any ideas
I am using Ivans Beta 15 and no problems, try flashing with that.
You have a new PM in a few moments as well.
PUG
Any idea where I can get hold of a copy of Ian's Beta 15 ROM. I've trawled round this site but can't seem to locate it
Big G said:
Hi All
I've tried all fixes for the above problem suggested by pug and mavrik64 earlier on this thread but without success. This is a little frustrating to say the least. The Jasjar has had clean install with nothing loaded other than the default programs included with the latest ROM build 1.90.96 from Jwrightmcps, the UK 'O2' setup and TomTom 6. As I know the software and Holox unit work fine on my old HP1940 running on wm2003, I'm convinced it is something in WM5 that is giving me the problem. I have read other forums were other people appear to have similar problems.
Please note; the main reason I flashed the ROM from that previously installed 1.30.76 was to try and find a fix for this problem. The older version gave me exactly the same problem.
Anyone got any ideas
Click to expand...
Click to collapse
Sorry to hear this didn't work. I am using JCs current rom with TT6 and Holux GPSlim 236 and it works like a charm.
Good luck
Mav
Hi
I have an XDA Exec which is only a few months old. I have used it with TomTom6 and a bluetooth GPS receiver without any problems. I haven't used it for a few weeks and I have been tryng to set it up for a trip but I keep seeing "No GPS Devive" on the screen.
Now you may be thinking that it's the receiver which is faulty as I did at first. I tried the receiver with another device and it's working fine.
I haven't changed or installed anything since it was last working so I'm at a total loss.
I have a bluetooth headset which is still working so the bluetooth is okay. I have even tried a hard reset and reinstalled TomTom.
Anyone any ideas please?
Andyfr
Hi,
You might try this:
http://franson.com/gpsgate/
I've had pretty good luck with it but I'm still learning about my Universal.
Good luck!
I would go to your Bluetooth manager page tap and hold on the GPS icon and select DELETE, next re-establish the bond/ pair between the device's and your application should start working again.
If you are unsure about setting up the device have a read through http://www.pocketgpsworld.com/modules.php?name=Forums&file=viewtopic&t=50105 Which details setting up an Exec to work with the TomTom application - you should not need to use Fransons GPS Gate to get TomTom working, the utility from Franson is a great application when you find you have a need for it - Mike