Database Users

A2DP

Hi,
I have been searching all over but, i can never find the A2DP Profile for
my BlueAngel Device. Would appreciate if someone can pass it to me.
Thanx

http://forum.xda-developers.com/viewtopic.php?t=15671&highlight=stereo+headset
http://forum.xda-developers.com/viewtopic.php?t=15644&highlight=stereo+headset

Will they work on Magician ?

is there a way for me to use it for music and phone ? i have tried around but, it will never work.

only way i know of is using the I-PHONE headset which use a dongle to play music and bluetooth directly to be a phone headset

Hi,
i have got the a2dp profile working well on my 2s. but, it breaks up quite often. Any ideas. ? I got the motorolla HT820. there is a previous and next track button. It does not work. Any ideas?

rick83 said:
i have got the a2dp profile working well on my 2s.
Click to expand...
Click to collapse
U mean to say that the you are able to listen to MP3 audio using BT in your BT headset??

yes... it works well...

Thanks a bunch for the info

rick83 said:
Hi,
i have got the a2dp profile working well on my 2s. but, it breaks up quite often. Any ideas. ? I got the motorolla HT820. there is a previous and next track button. It does not work. Any ideas?
Click to expand...
Click to collapse
hey guys,
any clues on how do i fix it ????

Mr Rick83
can u upload the a2dp profile patch file here to try it ?
and does it work with Magican ?

dont work on magician as it is using ms bt stack ..

Does this work on 1.40 with 3900?

rick83 said:
hey guys,
any clues on how do i fix it ????
Click to expand...
Click to collapse
I have the HT820 and got no problems like you, I do have the problem that outgoing calls automatically use ht820, but incoming calls the speaker on the phone. Music works fine.

pcrs said:
I have the HT820 and got no problems like you, I do have the problem that outgoing calls automatically use ht820, but incoming calls the speaker on the phone. Music works fine.
Click to expand...
Click to collapse
Hi pcrs,
Can you post the A2DP settings from your registry. Maybe, you have cracked the problem!
And, also AudioGateway settings too!
Thanks,
KOR!

Your Bluetooth Headset?

Ok guys and Gals, I need a Bluetooth Headset, as my Cellink doesn't seem to work.
Any recommendations or a list of BT headsets that are being used by you all
TIA

tt 5 seams run ok even with o2 active installed hasnt crashed yet

I have a bluespoon AX which is very, very small, and makes me look less of a tit than using other large headsets or the Universal itself.

Thanks for the replies, I've also sent an email to cellink regarding this issue. If I get a reply I'll post it here.

Ok finally after a bit of a wait I have a reply from Cellink. they say it should be able to work, and since my last attempt I have got it to be recognised.
Unfortunately when the xda rings I can only hear very faint sounds coming from the headset, I've tried the volume controls on the headset and on the xda.
Maybe I'm missing something! anyone care to comment?

I've got a Motorola HS-850 and it works really well. I especially like being able to just close the fold-in mic boom and it switching the headset off completely. Can last well over a week without needing to be charged.
Cheers,
Smiff.

I have a Jabra BT800, so i can see number of incoming callers without open my JASJAR.
Have Fun

Hi all does anyone know if the xda exec supports Audio Gateway Profiles?

Sagit said:
I have a Jabra BT800, so i can see number of incoming callers without open my JASJAR.
Click to expand...
Click to collapse
Are you saying that you can read the number displayed whilst the BT800 is on your ear? I tried holding a watch up in that position but couldn't read the dial at all - so went for the new thin Jabra BT500. Perhaps its just my tired old eyes.

I'd like to see a picture of that lol :shock: my eyes are aching just thinking about it
http://www.jabra.com/JabraCMS/EM/EN/MainMenu/Products/WirelessHeadsets/JabraBT800/JabraBT800.htm

darkan9el said:
I'd like to see a picture of that lol :shock: my eyes are aching just thinking about it
Click to expand...
Click to collapse
That's just what I thought. I couldn't see the point of having a display on the headset if I could only read the display before putting on the headset. Takes much longer to put on the headset, than it does to open the phone or lift the phone to your ear. And what would be the point of the display whilst you're driving?
There's another model, Sony or Motorola (?), that has a display on the outside of the headset - Just so that you can tell everyone around you who has phoned you. Duh! Seems even more pointless to me.

Will be the best... i suppose....
http://www.bluetake.com/Products/BT450Rx/BT450_subD.htm

I use my old SE HBH 200 handsfree and so far everything is well. I use it cos the LCD display is not near my ear so I can see it very fast. http://www.infosyncworld.com/reviews/n/5488.html

Sagit said:
I have a Jabra BT800, so i can see number of incoming callers without open my JASJAR.
Have Fun
Click to expand...
Click to collapse
oki doki, but to what extent functionality of BT 800 is for real ?
1. does it give you just the number, no matter, whether the contact IS IN the contact book already ? or it gives you the name instead of number ? assuming it is for already stored contact ...
2. what is the roughly distance between Exec and BT800 allowing for smooth operation and without strange noises ?
I am looking for good and fully functional BT headset for my Exec but as far as I am concerned there is a problem on BT800 with a/m functionalities
regards

I have a Sony Ericson HBH 662, and it works fine.

does anybody knows a BT headset that use the same mini USB of Universal for charging?

marcov said:
does anybody knows a BT headset that use the same mini USB of Universal for charging?
Click to expand...
Click to collapse
www.bluetake.com

jabra bt250v
hi all
is it just me or is it the jabra 250v crackling when i use it with the universal? sometimes works fine and most of the time there is a lot of crackling noise?
if it helps i had the same problem on the blueangel (xda2s)?
thoughts please.

gazela00 said:
marcov said:
does anybody knows a BT headset that use the same mini USB of Universal for charging?
Click to expand...
Click to collapse
www.bluetake.com
Click to expand...
Click to collapse
http://www.bluetake.com/products/BT400G5.htm
I see the DC jack, not the mini usb

marcov said:
gazela00 said:
marcov said:
does anybody knows a BT headset that use the same mini USB of Universal for charging?
Click to expand...
Click to collapse
www.bluetake.com
Click to expand...
Click to collapse
http://www.bluetake.com/products/BT400G5.htm
I see the DC jack, not the mini usb
Click to expand...
Click to collapse
http://www.bluetake.com/products/BT450Rx/BT450_subD.htm. English Manual pag 17...

o2 mini new bluetooth stack (AKA bluetooth stock).

hi guys, i know all of you want more bt stack rather than ms bt stack. now i found new bluetooth stock for dopod 818(o2 mini).
this is support your o2 mini support stereo bluetooth headset, but make should your bt headset supports. and there is also file transfer stock......and other thing, but stereo bluetooth function need to be improving.
attention: backup you system first.
i learn a lot in this forum, so i want to share this stock for all of you. this stock is i find from somewhere, so i can not fix any bug. anyway just enjoy....

First post and delivering such a revolution? Makes me nervous...

Chatty said:
First post and delivering such a revolution? Makes me nervous...
Click to expand...
Click to collapse
HAHA, I KNOW. BUT YOU CAN TRY, PLEASE FIND ATTACHED PHOTO. THIS DRIVER COME FROM ONE BLUETOOTH HANDSET.

Could this be? Can anyone verify?

Handsfree versus headset
Hi,
I tried and first thing, everything work now as fine as before so a first good point.
Second one problem : my Bluespoon AX is only recognize as a Hands-free and you can only set "Audio redirection" for Headset.
Perhaps some registry work ?
I will continue to investigate

very nice patch indeed..
installed it on my JAM... an it runs OK...
some extinsive testing is required however... I'll let you know later
Thank you kevinyang6688
If this works, you'll be the best

Works here aswell!
it even seems to support bluetooth printing???

---

just downloaded.. will give it a try.
thanks.

Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse

Re: O2 MINI NEW BLUETOOTH STOCK.
vicqoo said:
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
When you're logged on, you can download the file in the first post.

INstalled it but I have no clue how to make it work. Been to the BT settings and everything is there but I have no clue to as it does not detect my my Jabra BT250V.
Will this work in actually turning my Jabra into an audio headset or is it only as phone headset?

Does this help at all with the Nokia car kit echo issue?
Cheers

i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?

To Leewenam
Same thing for me but my Bluespon ax is only detected as a handsfree

Re: To Leewenam
eurorpeen said:
Same thing for me but my Bluespon ax is only detected as a handsfree
Click to expand...
Click to collapse
I guess this audio streaming thing only work for stereo BT? can anyone confirm this?

leeweenam said:
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
Click to expand...
Click to collapse
maybe delete the device and bond it again???

Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Man, you seriously kick a$$! This cab adds A2DP, FTP (successfully sent a series of 3 files to my Magician :shock: :wink: ), Audio Gateway (was able to use my laptop as a BT handsfree ), BT Printing Profile... AWESOME!!! Takes MS BT stack to a whole new level :shock:

But you could already send files with activesync over bluetooth without this stack (do i suppose ftp service is the same thing). Btw can you acces the files located on your computer from your mini now??? (if yes plz tell me how)
As far as I am concerned, it works but doesn t change anything with my bluetooth headset and voice command, i always don t hear any voice command sound in my bt headset, but then I hear the phone conversation directly in the headset...so nothing has changed.
Would have loved so much to hear and launch voice commands directly from the headset's mic.
But thx anyway! that s a really good thing for us anyway =)

It does work with I-tech S35 Stereo BT Headset
As per subject really...
Just tested this on my 1.12.00 T-Mobile Rom and indeed all audio is indeed being re-directed to my headset. Only 'drawback' is that I can't get it to work with PocketMind Pocket Music- the sound it just muted.
But it works perfectly well with Windows Media Player. Slight hitch with WMP is that I am unable to change the volume on the software or indeed the JAM system volume directly- a minor fault for me since I have a volume control my headset Also the music seems to cut out for a second or so every 7-8 seconds.
Music pauses and restarts when an incoming phone call is received.
A massive thanks goes out kevinyang6688. Cheers mate, I have been wanting this for ages! Thanks again!

JABRA blue tooth stereo headphone issue a2dp on 8525

when I am setting up my phone I was wondering if there was a button were I could use a button to switch between bluetooth headset or phone piece with a button or something... would be nice. Thanks.

sorry
I forgot that the main problem is I have to go to the setting everytime I want to switch.

anyone have this issue?

Ok, how about this... would anyone be able to develop something for this? thanks

christian15213 said:
when I am setting up my phone I was wondering if there was a button were I could use a button to switch between bluetooth headset or phone piece with a button or something... would be nice. Thanks.
Click to expand...
Click to collapse
Christian,
I use Jabra 620s and have not found a way to switch between lowdspeaker and headset too.
Something else, have an issue that I need to refresh my Jabra as Wireless Stereo everytime I disconnect it. Head-set paring works OK. Do you have this problem?

alex_atanassov said:
Christian,
I use Jabra 620s and have not found a way to switch between lowdspeaker and headset too.
Something else, have an issue that I need to refresh my Jabra as Wireless Stereo everytime I disconnect it. Head-set paring works OK. Do you have this problem?
Click to expand...
Click to collapse
yea it is silly... but I love my Jabra headphones... I jam out all the time and then answer the phone and people just look at me like... WTF... Hahahahah technology PEOPLE... lol
If someone could work on this it would be much appreciated...

It is a well known problem with the BT620s...
I have it as well and have to go through the whole process to set it as a wireless stereo over and over again...

Mythozz said:
It is a well known problem with the BT620s...
I have it as well and have to go through the whole process to set it as a wireless stereo over and over again...
Click to expand...
Click to collapse
is it jabra's problem or BT from the phone's problem?

It is Jabra's problem since the TyTN works with no problems with other Stereo Headsets...

Mythozz said:
It is Jabra's problem since the TyTN works with no problems with other Stereo Headsets...
Click to expand...
Click to collapse
I guess this is bad because I don't think my jabra's can get an update... can they? perhaps I dunno...

Christian,
Look at this link I found in one of the threads
http://www.simplesmartphone.com/BlueCast/
MIght turn to be a solution to the'swithc' problem?

alex_atanassov said:
Christian,
Look at this link I found in one of the threads
http://www.simplesmartphone.com/BlueCast/
MIght turn to be a solution to the'swithc' problem?
Click to expand...
Click to collapse
huh no way... I don't want to bog my stream down. That is not a good solution. sorry thanks for the help though

Mythozz said:
It is a well known problem with the BT620s...
I have it as well and have to go through the whole process to set it as a wireless stereo over and over again...
Click to expand...
Click to collapse
I've had this same issue with my TYTN paired to my SE HBH-DS970 headset so I don't think it's exclusive to BT620s. Every time I turn them on I have to go back to bluetooth settings and click-hold and select "Set as Wireless Stereo". I don't have this issue with HandsFree use, though.
It would be nice to have a one-click method to swap between them but I've been unable to find it.

per Jabra the problem is in HTC TyTn bluetooth.
See what I got from their support:
---quote---
The problem is how HTC implemented the Bluetooth on their device and there’s no way for us to fix it. Contact HTC since they are planning to release a new firmware fixing this problem.
---unquote---

Bluetooth audio "piping" APP needed

I have looked and read and Googled the interweb for several days now, I am in search for an app similar to MS Voice Commander, which is for WM devices? I loved the app immensely on my tytan/touch pro etc and was trying to find anything remotely close to it for Android. Any help is appreciated. At bare bones minimum I would like to find some way somehow to pipe all audio through a mono Bluetooth, which this did on my WM devices.
I do not know if it is possible to do so on current Android builds, but I never assume anything to be impossible when it comes to this site.

same thing
I found a few solutions, but non of them worked for me. You should try to call ** (dial ** and than call). Maybe it'll work for you.
There's an app too, called Sound route switcher http://www.appbrain.com/app/com.omercade.headsetProjectII
It couldn't help either.
I hope somebody can help us.

Same problem
At WM6 there is a registry tweak to transfer a ringtone to the bluetooth headset. It's very usefull when you don't want to take a look at the screen everytime you want to know who is calling.
Is there any way to do it at Android?
Help us, please.

Ill give the app a shot, although im sure its a long shot at that. I find it amazing that the demand is not higher for this.
liljom said:
same thing
I found a few solutions, but non of them worked for me. You should try to call ** (dial ** and than call). Maybe it'll work for you.
There's an app too, called Sound route switcher http://www.appbrain.com/app/com.omercade.headsetProjectII
It couldn't help either.
I hope somebody can help us.
Click to expand...
Click to collapse

G_Technik said:
Same problem
At WM6 there is a registry tweak to transfer a ringtone to the bluetooth headset. It's very usefull when you don't want to take a look at the screen everytime you want to know who is calling.
Is there any way to do it at Android?
Help us, please.
Click to expand...
Click to collapse
I'm trying to figure out the same trick on android. I want to hear my custom ringtones through my bluetooth headset. I have a milestone and a jawbone.

I am really surprised we haven't found a solution for this. I would be willing to pay a good chunk of cash to make this happen.

puresnow said:
I am really surprised we haven't found a solution for this. I would be willing to pay a good chunk of cash to make this happen.
Click to expand...
Click to collapse
You and i both! I was finally able to get my Blueant Q1 to update to firmware 2.1 (not the android OS) so now i can do a2dp with it. However i would pay for the ability to hear ALL sounds through the headset of my choice. I know my Jawbone Icon is supposably slated for a2dp firware upgrade in the future, but neither one of these are my headset of choice - and its ever changing.
*update* Icon has been updated to a2dp firmware!! Im getting closer, now if i could getting piping on any headset.

Bounty on Bluetooth voice dialing
$100 to the first one who can enable decent Bluetooth initiated voice dialing and voice prompts on the Incredible. If you need an example just pick up and featurephone like my E815...works great.

ill pony up
Ill offer $50 for an app that will work for android 2.1+ that will pipe bluetooth audio to mono BT headsets. Much like the before mentioned winMO app. My testing BT headset will be the MOTO HX1

jimbobcooterrooter said:
You and i both! I was finally able to get my Blueant Q1 to update to firmware 2.1 (not the android OS) so now i can do a2dp with it. However i would pay for the ability to hear ALL sounds through the headset of my choice. I know my Jawbone Icon is supposably slated for a2dp firware upgrade in the future, but neither one of these are my headset of choice - and its ever changing.
*update* Icon has been updated to a2dp firmware!! Im getting closer, now if i could getting piping on any headset.
Click to expand...
Click to collapse
I have the Q1 too. I just purchased it a couple of weeks ago. How can I make it send audio to BT?? I have a spring hero.

Just something I have been working with -
Does anyone know the android bluetooth service name? can we pipe audio from "MediaPlaybackService | Bluez" ?? I just don't know what the bluetooth service is I guess.

no idea on the service name.....The q1 can be updated by d/l and installing the firmware on the blueant website.

G_Technik said:
Same problem
At WM6 there is a registry tweak to transfer a ringtone to the bluetooth headset. It's very usefull when you don't want to take a look at the screen everytime you want to know who is calling.
Is there any way to do it at Android?
Help us, please.
Click to expand...
Click to collapse
Can you please advise the registry tweak for WM 6.1 Pro on HP iPAQ914c and BT headset Nokia BH-101 or any link to it? Thanks a lot.

jimbobcooterrooter said:
Ill offer $50 for an app that will work for android 2.1+ that will pipe bluetooth audio to mono BT headsets. Much like the before mentioned winMO app. My testing BT headset will be the MOTO HX1
Click to expand...
Click to collapse
did anyone find out anything about this? im having the same problem on my hero200 i have a mono bt headset and no music will play, no matter what app i use through the bt headset, i tried everything. if you have found out anything to this old post please pm me or something i would love to find out how to get audio through the bt mono headset on the hero 200

Here is the solution I use.
Super BT mono. It is in the app Market. It is $3. Money well spent in my opinion. It has a widget you can toggle that sends all played audio to BT Mono headset. I am using an LG 235 and it works great. The audio quality leaves a lot to be desired but I am only listening to podcasts while at work. This $3 app and cheap $15 mono bt headset sure beats the crap out of a $50 set of stereo a2dp headset for casual listening. Here is link to where I found my solution.

Crank my tunes through EVO to Plantronics Voyager Pro via Super BT Mono Froyo Pro. Funny name but it is a one of a kind app. Its in the market.

I have a jabra halo stereo headset. I can listen to music just fine. However, ringtones don't get routed properly to the headset - instead its the default jabra ringer. As a result, I have to look at my phone to see who is calling.
Is there any solution to getting ringtones to play on the headset?

bump bump for bluetooth

Works for me
SuperMonoBT Froyo works great on my HTC Inspire / ATT / Plantronics Voyager Pro. A bit of static from time to time, but otherwise fine. It automatically switches back to speakers if you turn off the BT. Menu includes an item to automatically pipe to the heatset if it is connected, which it did when launching Google Maps Navigation.