when I am setting up my phone I was wondering if there was a button were I could use a button to switch between bluetooth headset or phone piece with a button or something... would be nice. Thanks.
sorry
I forgot that the main problem is I have to go to the setting everytime I want to switch.
anyone have this issue?
Ok, how about this... would anyone be able to develop something for this? thanks
christian15213 said:
when I am setting up my phone I was wondering if there was a button were I could use a button to switch between bluetooth headset or phone piece with a button or something... would be nice. Thanks.
Click to expand...
Click to collapse
Christian,
I use Jabra 620s and have not found a way to switch between lowdspeaker and headset too.
Something else, have an issue that I need to refresh my Jabra as Wireless Stereo everytime I disconnect it. Head-set paring works OK. Do you have this problem?
alex_atanassov said:
Christian,
I use Jabra 620s and have not found a way to switch between lowdspeaker and headset too.
Something else, have an issue that I need to refresh my Jabra as Wireless Stereo everytime I disconnect it. Head-set paring works OK. Do you have this problem?
Click to expand...
Click to collapse
yea it is silly... but I love my Jabra headphones... I jam out all the time and then answer the phone and people just look at me like... WTF... Hahahahah technology PEOPLE... lol
If someone could work on this it would be much appreciated...
It is a well known problem with the BT620s...
I have it as well and have to go through the whole process to set it as a wireless stereo over and over again...
Mythozz said:
It is a well known problem with the BT620s...
I have it as well and have to go through the whole process to set it as a wireless stereo over and over again...
Click to expand...
Click to collapse
is it jabra's problem or BT from the phone's problem?
It is Jabra's problem since the TyTN works with no problems with other Stereo Headsets...
Mythozz said:
It is Jabra's problem since the TyTN works with no problems with other Stereo Headsets...
Click to expand...
Click to collapse
I guess this is bad because I don't think my jabra's can get an update... can they? perhaps I dunno...
Christian,
Look at this link I found in one of the threads
http://www.simplesmartphone.com/BlueCast/
MIght turn to be a solution to the'swithc' problem?
alex_atanassov said:
Christian,
Look at this link I found in one of the threads
http://www.simplesmartphone.com/BlueCast/
MIght turn to be a solution to the'swithc' problem?
Click to expand...
Click to collapse
huh no way... I don't want to bog my stream down. That is not a good solution. sorry thanks for the help though
Mythozz said:
It is a well known problem with the BT620s...
I have it as well and have to go through the whole process to set it as a wireless stereo over and over again...
Click to expand...
Click to collapse
I've had this same issue with my TYTN paired to my SE HBH-DS970 headset so I don't think it's exclusive to BT620s. Every time I turn them on I have to go back to bluetooth settings and click-hold and select "Set as Wireless Stereo". I don't have this issue with HandsFree use, though.
It would be nice to have a one-click method to swap between them but I've been unable to find it.
per Jabra the problem is in HTC TyTn bluetooth.
See what I got from their support:
---quote---
The problem is how HTC implemented the Bluetooth on their device and there’s no way for us to fix it. Contact HTC since they are planning to release a new firmware fixing this problem.
---unquote---
Related
Hi,
I need to automatically pickup on calls. However this doesn't work if a bluetooth headset is attached: I have to use the headset button.
Moreover, if I answer tapping on screen, bt headset deactivates!
If I`m not wrong U have this option in Start/Settings/Phone...and then click on More there U have to check the box saying:
Answer incoming call withouth pressing
And then U have to chose how many times do U want your device to ring before answering...
Hope it will help!
Regards,
Primoz
P.s. If I`m not wrong...U have to chose a short ringtone for this...!
I have already done this, but the phone doesn't answer itself. I choose classic.wav ringtone....
Update
I found autoanswer is not working at all :-(
Anybody issued this problem?
unfortunately, I have the same problem.
The auto answer function was only ever designed for the standard wired headset. It won't work for bluetooth headsets or speakerphone.
JD
jdee246 said:
The auto answer function was only ever designed for the standard wired headset. It won't work for bluetooth headsets or speakerphone.
JD
Click to expand...
Click to collapse
In my oppinion the standard headset which is in the box with the JAM suxs!...is too quiet for me...I have tried it in my car and I have to take the phone from the car holeder and talk in normal way...I haven`t heard almost nothing from the headset...so I`m planning to buy a BT headset...but don`t know whichone to chose...
Regards,
Primoz
p.s. This was only my personal oppionion!
jdee246 said:
The auto answer function was only ever designed for the standard wired headset. It won't work for bluetooth headsets or speakerphone.
JD
Click to expand...
Click to collapse
may be is some additional software to fix the problem with autoanswering? It is very big problem for me! because I use BT headset when I'm skiing with helmet on my head.
/
Yeah, the same with me. I used to use my NOKIA 6230 + jabra250. Jabra suites nicely under my Arai hemlet and I can ride my motorcycle and answer phone calls.
Any ideas what should be done?
Igor
Hi,
I have been searching all over but, i can never find the A2DP Profile for
my BlueAngel Device. Would appreciate if someone can pass it to me.
Thanx
http://forum.xda-developers.com/viewtopic.php?t=15671&highlight=stereo+headset
http://forum.xda-developers.com/viewtopic.php?t=15644&highlight=stereo+headset
Will they work on Magician ?
is there a way for me to use it for music and phone ? i have tried around but, it will never work.
only way i know of is using the I-PHONE headset which use a dongle to play music and bluetooth directly to be a phone headset
Hi,
i have got the a2dp profile working well on my 2s. but, it breaks up quite often. Any ideas. ? I got the motorolla HT820. there is a previous and next track button. It does not work. Any ideas?
rick83 said:
i have got the a2dp profile working well on my 2s.
Click to expand...
Click to collapse
U mean to say that the you are able to listen to MP3 audio using BT in your BT headset??
yes... it works well...
Thanks a bunch for the info
rick83 said:
Hi,
i have got the a2dp profile working well on my 2s. but, it breaks up quite often. Any ideas. ? I got the motorolla HT820. there is a previous and next track button. It does not work. Any ideas?
Click to expand...
Click to collapse
hey guys,
any clues on how do i fix it ????
Mr Rick83
can u upload the a2dp profile patch file here to try it ?
and does it work with Magican ?
dont work on magician as it is using ms bt stack ..
Does this work on 1.40 with 3900?
rick83 said:
hey guys,
any clues on how do i fix it ????
Click to expand...
Click to collapse
I have the HT820 and got no problems like you, I do have the problem that outgoing calls automatically use ht820, but incoming calls the speaker on the phone. Music works fine.
pcrs said:
I have the HT820 and got no problems like you, I do have the problem that outgoing calls automatically use ht820, but incoming calls the speaker on the phone. Music works fine.
Click to expand...
Click to collapse
Hi pcrs,
Can you post the A2DP settings from your registry. Maybe, you have cracked the problem!
And, also AudioGateway settings too!
Thanks,
KOR!
Ok guys and Gals, I need a Bluetooth Headset, as my Cellink doesn't seem to work.
Any recommendations or a list of BT headsets that are being used by you all
TIA
tt 5 seams run ok even with o2 active installed hasnt crashed yet
I have a bluespoon AX which is very, very small, and makes me look less of a tit than using other large headsets or the Universal itself.
Thanks for the replies, I've also sent an email to cellink regarding this issue. If I get a reply I'll post it here.
Ok finally after a bit of a wait I have a reply from Cellink. they say it should be able to work, and since my last attempt I have got it to be recognised.
Unfortunately when the xda rings I can only hear very faint sounds coming from the headset, I've tried the volume controls on the headset and on the xda.
Maybe I'm missing something! anyone care to comment?
I've got a Motorola HS-850 and it works really well. I especially like being able to just close the fold-in mic boom and it switching the headset off completely. Can last well over a week without needing to be charged.
Cheers,
Smiff.
I have a Jabra BT800, so i can see number of incoming callers without open my JASJAR.
Have Fun
Hi all does anyone know if the xda exec supports Audio Gateway Profiles?
Sagit said:
I have a Jabra BT800, so i can see number of incoming callers without open my JASJAR.
Click to expand...
Click to collapse
Are you saying that you can read the number displayed whilst the BT800 is on your ear? I tried holding a watch up in that position but couldn't read the dial at all - so went for the new thin Jabra BT500. Perhaps its just my tired old eyes.
I'd like to see a picture of that lol :shock: my eyes are aching just thinking about it
http://www.jabra.com/JabraCMS/EM/EN/MainMenu/Products/WirelessHeadsets/JabraBT800/JabraBT800.htm
darkan9el said:
I'd like to see a picture of that lol :shock: my eyes are aching just thinking about it
Click to expand...
Click to collapse
That's just what I thought. I couldn't see the point of having a display on the headset if I could only read the display before putting on the headset. Takes much longer to put on the headset, than it does to open the phone or lift the phone to your ear. And what would be the point of the display whilst you're driving?
There's another model, Sony or Motorola (?), that has a display on the outside of the headset - Just so that you can tell everyone around you who has phoned you. Duh! Seems even more pointless to me.
Will be the best... i suppose....
http://www.bluetake.com/Products/BT450Rx/BT450_subD.htm
I use my old SE HBH 200 handsfree and so far everything is well. I use it cos the LCD display is not near my ear so I can see it very fast. http://www.infosyncworld.com/reviews/n/5488.html
Sagit said:
I have a Jabra BT800, so i can see number of incoming callers without open my JASJAR.
Have Fun
Click to expand...
Click to collapse
oki doki, but to what extent functionality of BT 800 is for real ?
1. does it give you just the number, no matter, whether the contact IS IN the contact book already ? or it gives you the name instead of number ? assuming it is for already stored contact ...
2. what is the roughly distance between Exec and BT800 allowing for smooth operation and without strange noises ?
I am looking for good and fully functional BT headset for my Exec but as far as I am concerned there is a problem on BT800 with a/m functionalities
regards
I have a Sony Ericson HBH 662, and it works fine.
does anybody knows a BT headset that use the same mini USB of Universal for charging?
marcov said:
does anybody knows a BT headset that use the same mini USB of Universal for charging?
Click to expand...
Click to collapse
www.bluetake.com
jabra bt250v
hi all
is it just me or is it the jabra 250v crackling when i use it with the universal? sometimes works fine and most of the time there is a lot of crackling noise?
if it helps i had the same problem on the blueangel (xda2s)?
thoughts please.
gazela00 said:
marcov said:
does anybody knows a BT headset that use the same mini USB of Universal for charging?
Click to expand...
Click to collapse
www.bluetake.com
Click to expand...
Click to collapse
http://www.bluetake.com/products/BT400G5.htm
I see the DC jack, not the mini usb
marcov said:
gazela00 said:
marcov said:
does anybody knows a BT headset that use the same mini USB of Universal for charging?
Click to expand...
Click to collapse
www.bluetake.com
Click to expand...
Click to collapse
http://www.bluetake.com/products/BT400G5.htm
I see the DC jack, not the mini usb
Click to expand...
Click to collapse
http://www.bluetake.com/products/BT450Rx/BT450_subD.htm. English Manual pag 17...
I don't know what I did do wrong! now all the sounds in U1000 disappeared. every sound moves into the Jabra BT8010. I have to turn off my jabra so that the sound of U1000 reappears.
Any advice! Thanks
jlingo said:
I don't know what I did do wrong! now all the sounds in U1000 disappeared. every sound moves into the Jabra BT8010. I have to turn off my jabra so that the sound of U1000 reappears.
Any advice! Thanks
Click to expand...
Click to collapse
Problem is temporarily solved by deleting all the pairing and redo the pairing of the headset but only choose as handsfree instead of wireless stereo.
jlingo said:
Problem is temporarily solved by deleting all the pairing and redo the pairing of the headset but only choose as handsfree instead of wireless stereo.
Click to expand...
Click to collapse
Ok whenever I turned off my Jabra and then turn it on again, the sound from U1000 all transferred to Jabra again. I have to redo the pairing again. The same with Charging! It's very annoying. Not sure if this happens to everyone else with A2DP bluetooth headset.
I was able to replicate this problem with my Universal WM6 as well. So I assume that it's a problem with all A2DP headsets?
Doesn't happen with me...Phone Ringing is from spkrs..all other sounds to 8010.
jlingo said:
Ok whenever I turned off my Jabra and then turn it on again, the sound from U1000 all transferred to Jabra again. I have to redo the pairing again. The same with Charging! It's very annoying. Not sure if this happens to everyone else with A2DP bluetooth headset.
I was able to replicate this problem with my Universal WM6 as well. So I assume that it's a problem with all A2DP headsets?
Click to expand...
Click to collapse
hdubli said:
Doesn't happen with me...Phone Ringing is from spkrs..all other sounds to 8010.
Click to expand...
Click to collapse
how about the sms sound? does it come out of the U1000 or Bluetooth headset?
SMS sound is to Bluetooth..
I think this is standard behaviour: once you set your BT headset to "Wireless Stereo" mode, all sounds will go to your headset, but phone rings will still happen on both the speakers and the headset.
Same goes for my Dopod U1000 and iTech R35.
Is there an easy way to end Stereo A2DP mode but leave phone headset mode on?
After listening to music on the way to work I want to leave the headset on for calls only, not linked for music (and draining battery more) all day. At the moment I have to turn my headset off and on to do this.
BTW, i have a Jabra BT-150. It sucks with the Ameo. Its the worst POS ive had. It worked fine on other phones, but just doesnt play nice with my Ameo.
On the other hand, my cheap iWing stereo headset from maplin works great! It had problems with wm6 on my old Universal, but works so well on the Ameo.
UK people should check out the £29.99 maplin deal on iWing headsets.
Pyrofer said:
UK people should check out the £29.99 maplin deal on iWing headsets.
Click to expand...
Click to collapse
I'm interested, however can't seem to find them on the Maplin website. Can you tell more?
Would an URL do?
http://www.maplin.co.uk/Module.aspx?ModuleNo=98974&criteria=sale&doy=25m4
I have them and apart from poor low end response in music they work fine.
I just discovered that its not even stereo by default!!!!! You want real stereo? Get out your reg editor...
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/BitPool=30 - change to 48
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/MaxSupportedBitPool=30 - change to 58
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/UseJointStereo=1 - change to 0
Find a song with lots of stereo seperation that you know, listen... Do the reg hack (Soft reboot), listen again.
Man, That sucks! What a stupid default, and why no simple tick box in bluetooth settings to change it?
A simple method just check the A2DP box in BT manager proporties of your handfree and uncheck it.
Pyrofer said:
I just discovered that its not even stereo by default!!!!! You want real stereo? Get out your reg editor...
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/BitPool=30 - change to 48
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/MaxSupportedBitPool=30 - change to 58
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/UseJointStereo=1 - change to 0
Find a song with lots of stereo seperation that you know, listen... Do the reg hack (Soft reboot), listen again.
Man, That sucks! What a stupid default, and why no simple tick box in bluetooth settings to change it?
Click to expand...
Click to collapse
Ahhhh .... no wonder I find that the music streaming from the U1000 sounds a bit hollow and not as stereo as my previous Qtek 9000. Will try this out later. Thanks!
Pyrofer said:
Would an URL do?
http://www.maplin.co.uk/Module.aspx?ModuleNo=98974&criteria=sale&doy=25m4
I have them and apart from poor low end response in music they work fine.
I just discovered that its not even stereo by default!!!!! You want real stereo? Get out your reg editor...
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/BitPool=30 - change to 48
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/MaxSupportedBitPool=30 - change to 58
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/UseJointStereo=1 - change to 0
Find a song with lots of stereo seperation that you know, listen... Do the reg hack (Soft reboot), listen again.
Man, That sucks! What a stupid default, and why no simple tick box in bluetooth settings to change it?
Click to expand...
Click to collapse
HOLLY MOLLY!! It resulted in amazing separation and much better sound quality!!! I can't believe it!
Here I have connection problem between X1 and DS205, and it may happen to other A2DP headsets. The pairing is OK, music and phone call are also OK. The only issue is whenever ending a phone call (in or out), the DS205 is disconnected anyway, while the BT status is still on. Thus I have to push the play/stop key to connect DS205 and X1 again. Did you run into this problem? Any solution for this? Thank you!
wdq30 said:
Here I have connection problem between X1 and DS205, and it may happen to other A2DP headsets. The pairing is OK, music and phone call are also OK. The only issue is whenever ending a phone call (in or out), the DS205 is disconnected anyway, while the BT status is still on. Thus I have to push the play/stop key to connect DS205 and X1 again. Did you run into this problem? Any solution for this? Thank you!
Click to expand...
Click to collapse
Yes, I have the same problem w/ DS-205 and JVC BT-1 (I had a review post before and talk about this issue as well). I think this is a common problem of HTC device since my ATT Tilt also has the same issue.
Maybe we should complaint to Sony and let Sony gives some pressure to HTC to fix this issue.
jackleung said:
Yes, I have the same problem w/ DS-205 and JVC BT-1 (I had a review post before and talk about this issue as well). I think this is a common problem of HTC device since my ATT Tilt also has the same issue.
Maybe we should complaint to Sony and let Sony gives some pressure to HTC to fix this issue.
Click to expand...
Click to collapse
Thank you! I have sent my complaint to Sonyericsson, and now I'm waiting for the response. This problem is quite annoying during listening to music. And I guess it's only for the stereo headsets, doesn't happen to the mono one. Am I right?