Database Users

xdarit old version

hi all
may i konw where can i find the old version of xdarit?
cos i already try all the method but cannot used for me
cos i have bootloader 6.22 wrongly update to t-mobile ppc2003
kingmax card reader n 1gb transcend sd card.
cannot use a xdatools cos it pop up same problem most of people that problem in here...
xdarit 1.02 cant used cos it display failed to open devices
any solution other than use xdarit old version
hope all expert in here can help newbie like heheheh
ok thank you in advance

1GB card detected as 135MB-Problem Solved

I have a problem, the SD card works, the device asked me to format it, but after the format my S100 detects it as a 135 MB card. I don't have a card reader to try formating the card in it , but while in the phone i tried to format it from my PC - no change - after the formating it's still detected as 135MB. How can I fix this?
I've tried Resco Explorer, Softick CardExport II<both format on the device and from my PC in card export mode> and Pocket Mechanic<both in FAT16 and FAT32> - all the three of them detect it as 135 MB card. The card is working great with Universal, and in camera the card is working too, so it's OK and it's realy 1 GB....
the brand is 1GB PQI hi-speed 133
============================
S100
1GB PQI hi-speed 133x
R 1.13.00
G 1337.43
D 1.13.00 WWE

Subject: 1GB card detected as 135MB????? HELP ME PLEASE
Hi use this app inside the windows with a card reader,
CompuApps SwissKnife V3 3.22
link: http://software-files.download.com/...48&siteId=4&edId=3&pid=10485574&psid=10070864
good lock , [/quote]

10x, pal, as soon as i 've tried i'll write what's the result.

There's some kind of problem- Swissknife gives me an error when I try to run it under Windows XP SP2. During the install there were no errors. But the program crashes everytime I start it up... I've downloaded again from the developers site reinstlled it and - nothing - it gives me the same error again. everytime I run it I end up witjh the MS error reporting tool...

Problem Solved
IT WORKED. I've just needed to restart my PC. The card is shown now as 955MB card. Great tool. I've even succeded without the card reader-used Softik Card Export II and formated the card via the USB directly on my Qtek
+++++++++++++++++++++
Credits and thanks go to ronald11
10x buddy
+++++++++++++++++++++

SDHC Card support

Since there is new card specification, Secure Digital High Capacity, a question if present devices will manage to work with this new standard is up to date. I read about SDHC driver that is present in newest leaked roms (aku 3.3 / crossbow) and I foud it myself in wizard ROM. The file name is OMAP850_SDHC.dll, I can't check if SDHC cards really work because I don't have such card but I'm curious if it can Looking through hex code seams it is the driver we all wont but when we look at registry we find HKLM\Drivers\BuiltIn\SDHC and nothing about SDHC in HKLM\Drivers\SDCARD\ClientDrivers\Class. And now my question to developers and hackers how it should look like to make it work? Do we need to simply add SDHC_Class or it needs some more magic?

SDHC here means SD Host Controller, not SD High Capacity (

TomTom Home can't detect my SD 2G

Hi,
After my upgrade to the new HTC PT ROM I have instaled the new version of TomTom Home. So far so Good...
why can't the program detect my SD 2G card in the Device?
Only internal memory has been detected.
Thanks
WP

Have you tried formatting it. I use a 2gb card and tomtom recognized it with no problem.
Have you tried using the Sd adapted with your card and connecting it to your PC directly?

I have copied a orginal TomTom card to my SD 2G Card with my PC card reader, and, when i conect through activesinc my p3600 (to PC) and run my tomtom Home , The aplication just see the internal memory at Uper right corner.
Formatting it is not a option because i have programs instaled in it.
Thanks again.
WP

1. Copy content of SD card to PC
2. Format SD card with the PANASONIC formatting tool (see other thread)
3. Copy content from PC to SD card
This should solve your problems.

OK
I will test it and report the result.
Thanks
WP

I have exactly the same problem. Please let me know whether the solution of formatting help you.

Works Great for me on HTC p3600 !!!
and Kingston SD 2G
The tomtom Home Now sees the SD Card
Very Thanks man.
...but i still have some problems doing a Full backup with tomtom home software. Always popup an error when reading some files instaled in SD card by other programs
Sory my English is a litle bit rusty.
WP

I did have the same issues when trying to make a backup from TomTom home (I didn't have issues with previous versions of TomTom home). I contacted their support department and this was their response (I did have to translate it):
At this moment it's not possible to create a back-up from a PPC with TomTom Home version 1.5. This will be adapted but at the moment we advice you to make a manual backup.
Then they explained how to make a manual backup which basically required a SD card reader. They didn't specify a date on which it would be fixed.

Speedycon said:
I did have the same issues when trying to make a backup from TomTom home (I didn't have issues with previous versions of TomTom home). I contacted their support department and this was their response (I did have to translate it):
At this moment it's not possible to create a back-up from a PPC with TomTom Home version 1.5. This will be adapted but at the moment we advice you to make a manual backup.
Then they explained how to make a manual backup which basically required a SD card reader. They didn't specify a date on which it would be fixed.
Click to expand...
Click to collapse
I'm Glad is not my problem
Thanks
WP

I think only formating the fat32 to fat will solve your problem.
but first copy all the files inside the 2gb sd to computer and unhide the file which is hidden. all files must be copied. Thats all.

please help installing sdhc drivers....!!!!!

can some one please tell me step wise from where and how can i install sdhc drivers into my gene p3400 currently running original wm5 factory rom......
thanks in advance....

If you install wm6 rom (the official one) or any custom rom you'll have the sdhc drivers.

hi
thx for replying...
but cant i use those drivers in my wm5 rom...
and also tell me waht are these sdhc cards....
are they the same micro sd 4 gb cards or something different....

These drivers are for you can use SDHC (SDHC are cards with high capacity and speed) cards with gene. If your card is not SDHC then you not need it. btw I think in General section you'll find it.

SDHC stands for Secure Digital High Capacity cards. Cards >= 4 GB storage come in this format. MicroSD cannot support that much storage. SDHC cards are also available in both MicroSD form factor (small card) as well as the SD form factor (full size card). To use these cards a driver file called OMAP850_SDHC.dll is needed to be in your phone, plus some registry settings.
Better way to get it is to use a WM 6.1 ROM, official or cutom, as per your choice. Otherwise, you'll have to search for these as i dont know about that. My P3400i came with WM 6 so never needed these.
Good luck!