Related
History of my XDA 2:
• Supplied with WM2003, no problems.
• Upgraded to WM2003SE, no problems.
• Recently upgraded to WM2005, phone did not work ("No Service" everywhere I went).
• Downgraded to WM2003SE, no problems, phone works fine.
• Tried upgrading to WM2005 again, phone does not work again.
I have tried everything I can logically think of to try and get the phone to work. I have checked the country setting (UK), phone settings (all looks fine, but I'm not 100% sure what the settings should be), unlocked my phone using xda2unlock, and tried different sims.
I'm using the BuzzDev 60b.96 release. Has anyone else had this problem?
Update: I've just remembered that my phone did work for a while after upgrading to WM2005. It might have been some program I installed that caused the problem. I've also noticed that when I downgraded to WM2003 and upgraded to WM2005 again, all my settings and programs I installed in WM2005 originally are still there. Does anyone know how to reset the memory completely so my programs and settings in WM2005 will be reset to a clean installation?
Update 2 - Problem Solved!: I've just performed a format by holding the Camera and Record button while doing a reset, and WM2005 just reinstalled. Now the phone works fine!
Try this ...
As for your preinstalled software which doesn't seem to get erased when updating your rom, simply downgrade your ppc to wm2003se and install the extended rom unlocker. Then unlock and unhide your extended rom. Then from file explorer go to your (storage) drive and delete everything inside the drive and then go to your extended rom drive and delete everything there. This should remove any installed software from your pre-wm2005 installation.
Now as for your radio problem, I would suggest you use either radio rom version 1.17 or 1.18 and see which one works. Now if you've tried upgrading your ppc using only buzz lightyears os rom WHICH DOES NOT INCLUDE the radio rom, then you've only upgraded your os rom and have used your pre-existing radio rom that was properly running on wm2003se but seemed to fail on wm20051.6b. Now, in this case, I would suggest you either download radio versions 1.17 or 1.18 nb files and adding them to your os update setup directory along with buss lightyear's wm2005 1.6b You can find both radio versions on our FTP site
ftp://ftp.xda-developers.com/Himalaya_SEs/Radio/
From there you can try both radio roms and see which one works best with u. Good Luck ;-) Tareq A.N
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.
No problem thanks for your help
dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz
Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.
Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.
It works a treat. Thanks muchly!
Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:
I also managed to 'locate' another copy and it works fine, thanks for all the help.
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?
Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!
sorry ignore that post! Work computer blocked the file out
I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.
Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob
Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.
Tried it. Still get the problem :-(
My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.
Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.
I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.
Well finally done,
Do not expect equaliser and FM to work, I have not got the bacground files for them.
That bloody Exrom.img new format is hardnut to crack.
It is My-Systems diskonchip format.
Hope somebody helps me to get it working.
get the mediapluso2 second version from AtomLife hereby attached
hxxp://rapidshare.com/files/34379910/MediaPlusO2.rar
(This is the version 2 from Atom Life WM6 ROM, for WM5 Mediaplus Version 1 please tell me if required and if this not work)
i installed but it says skins are corrupt, cant seem to find an uninstaller with it either to tidy back up again
Carnivor said:
i installed but it says skins are corrupt, cant seem to find an uninstaller with it either to tidy back up again
Click to expand...
Click to collapse
I tested it on my EtenM700 with WM6, and the WM6 Professional Emulator on Laptop.It worked fine on them both.
Check whether a directory has been created with the name
_QHiddenPartition in the root of the device.
else this cannot work.
I just created this with WinCE Cab manager, install/uninstall options I will try to figure out.
_QHiddenPartition was created, and i could look at the bitmaps fine
Carnivor said:
_QHiddenPartition was created, and i could look at the bitmaps fine
Click to expand...
Click to collapse
sSorry, i should have told u, its from Atom wm6 rom, hence v2 will not work on WM5
Did you manage to get FM to work already?
Found Kaiser.HTC.Home.v2.0.814.722-schen.cab in the Hermes forum:
http://forum.xda-developers.com/sho...hlight=Kaiser.HTC.Home.v2.0.814.722-schen.cab
Versin 2.0 allows you to add a diffrent number to favorite People (1.5 defaults to the mobile thus you need to create a new contact to use the Office number.).
Well that is the good news, the bad is that I cant get it to work on my BA
It installs well.
Under Start - Settings -Today - Items - It adds a HTC Home Tab.
The tick boxes work fine (fast as well JOKE).
And on the Today screen it adds Nothing.
I have done a old uninstall, new install, wait, softreset, wait.
This is a patched version based on the thread so may be the clean version would work.
So has anybody got Version 2.o to work on a BA ??
That's v 2.0.720719.
2.0.814.722 is here: http://forum.xda-developers.com/showthread.php?t=327646
DANDANA said:
That's v 2.0.720719.
2.0.814.722 is here: http://forum.xda-developers.com/showthread.php?t=327646
Click to expand...
Click to collapse
SOME PICTURES PLEASE!!
I didn't try it and MDAIIIUser said isn't working on BA....yet
It looks the same as 1.5 with aditional options, but i can't get it to work either, i install needed certificates but still nothing
xplode said:
It looks the same as 1.5 with aditional options, but i can't get it to work either, i install needed certificates but still nothing
Click to expand...
Click to collapse
2.0.xxx.xxx work much better than v 1.5....thrust me.
Are you able to get v2.0.7xx.xxx to work?
You can see that v 2.0.8xx.xxx and v 2.0.7xx.xxx and v1.5.xxx.xxx all using DIFFERENT certificate to sign. That is my experimenting on the certificates thing. All work OK with my Hermes. Maybe it is certificate thing...maybe it is other matter that prevent the new version from working correctly for BA. But really I DONT see any reason other than certificate. You can try to sign the dll with other certificates to see if it work or not.
I only patch the dll to enable instalation outsite of windows directory and to fix the brightness shortcut. Other than that nothing. So, this should not be the issue
Congratulation guys WM6 finally arrived for BA and Hima user. I should have hold my thrustworthy Hima longer I dont have to upgrade, BUT Hermes ROCKS, no regret.
Thanks schen for your input, i have tryed al the 2.0.x versions with the same certificates (looked mainly into hermes forums) provided for hermes, but the home settings show in today options and the plugin just does not load. I agree that this is certificate error i will try to sign them with difrend certificates to see what will happen
regards xplode
Edit: I have tryed both 2.0 versions on clean hard resseted rom with both certificates installed and none ot them does not work for some reason, now i will try to sign the dll's with sdk certificate to see the results
Anyone have any luck with Home 2.0 on BA?
Same problem with HTC Plus.
I think the problem is certificate sign.
Just to let you know that this issues is just not with your devices, we are also seeing the same problems with the Apache running Helmi's port of WM6. It shows in settings, but nothing on Today screen. Have tried certs and signing as well.
However, both 2.x versions work fine with the Titan running WM6. My thought was that there were some remnants from the WM6 port that were still using WM5.
maybe you are right, because i signed all files with one certificate and then with another ans it is the same result
If you guys have install the sdkcerts.cab before installing home then I dont think it is certs problem...it is more like device specific security setting problem
Maybe you guys can take a look at the WM5 security...each of the ROM might have different default setting. Some device even dont allow security setting to be change.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppcgen/html/wmsecurity.asp
I will also try copying the SampleDevPrevCert.pfx to the device and click on it. It will add the root cert to the thrusted certificate store. It may work it may not but very simple and worth a try.
Bottom line, if you try the "No Security" setting which allow all signed or unsigned apps to pass and the HTC Home still not working then I dont have any idea anymore.
Please try....
Out of curiosity why v2 of HTC home working on certain device and rom and not working on others, I have resigned all the dll, exe, and mui files with my own certificate.
Installation note in the Readme file inside the zip.
I am looking for some people to try if the cab work. As soon as 2-3 report still not working I will delete the attachment.
Test it, i couldn't install at all; "installation of ... was unsuccessful"; thanks anyway Schen.
Now installing, will keep you posted in few minutes
the instalation of the cab is unsuccessful (the home cab)
DANDANA said:
Test it, i couldn't install at all; "installation of ... was unsuccessful"; thanks anyway Schen.
Click to expand...
Click to collapse
Same error message for me
schen said:
Out of curiosity why v2 of HTC home working on certain device and rom and not working on others, I have resigned all the dll, exe, and mui files with my own certificate.
Installation note in the Readme file inside the zip.
I am looking for some people to try if the cab work. As soon as 2-3 report still not working I will delete the attachment.
Click to expand...
Click to collapse
I tried 3-4 times, but always installation of HTC Home cab was unsucessfull
Hi Schen,
Thanks for your help with this issue. I can confirm DANDANA's results on my Apache (Helmi's WM6 AKU .7) with no prior version of HTC Home installed. Your cert cab installs OK but the Kaiser.HTC.Home.v2.0.814.722.Resigned-schen.cab fails to install.
I believe this is due to the mui files (from my own experience in trying to unsign/resign them I think the certificate table gets corrupted somehow).
I sent you a PM earlier, but would it be possible to obtain a copy of all of the original HTC Home 2.0.814.722 PE files (prior to any hex editing & re-signing)? Helmi would like to take a look at it since it seems to be an issue with his WM6 ROMs (also affects his AKU .42 release for APAC).
Thanks again!
i have removed flags in cab for the self registering and shared for WmpPluginToday.dll and now it installs but it still does not work
xplode said:
i have removed flags in cab for the self registering and shared for WmpPluginToday.dll and now it installs but it still does not work
Click to expand...
Click to collapse
Yes....I forgot to remove the self registering of the plugin, that is the cause of installation unsuccessfull....Earlier I tested this on my hermes manually coying the files and it work OK.
I have remove the cab. AT least I am convince by now it is not the certs thing.
Luv...got your PM...I will have to look for the original HTCHome.dll if I still have it. As I said before....the hack I did was just to change the default directory (\windows) to (\HTCHome) for the graphics AND change it to call HTCUti1.dll instead of HTCUtill.dll...They are unicode hex editing only. You could hex edit and change "\HTCHome" back to "\Windows" and "HTCUti1" back to "HTCUtill", resign it and everything is back to original. The mui files came unsign. I have to sign the mui files to get it to work for hermes.
In the mean time....the main difference between v 1.5 and v 2.0 is the "PROFILE" Tab...Try to install, disable the "Profile", reset if necessary to see if it work. The attached cab only enable the Home tab by default...if it work, you can enable all other tabs one by oneto see which tab is causing the problem.
hi everyone!
as there are many various cabs flying around here (eg. cab & cab2 from xplode, Addon cabs on Helmi_C's WM06 rom, various HTC plugins, etc.), i wonder if there is a correct or some kind of "best" order to install them!
how does everyone's install sequenz look like?
are there any known problems, which result from installing in a wrong order?
or is it totally nonrelevant...?
regards,
krz
AFAIK the only cabs to be installed in a order are:
1. ArcsoftMMS4.2.8.1.cab
2. MMS_enable.cab
from Xplode cabs2
DANDANA said:
AFAIK the only cabs to be installed in a order are:
1. ArcsoftMMS4.2.8.1.cab
2. MMS_enable.cab
from Xplode cabs2
Click to expand...
Click to collapse
QFE
You are right about that
thanks for your answers!!
i knew about the MMS cabs...
i just wondered, because the first time I upgraded to WM2006, everything worked totally fine. I hab no problems no matter what, wifi worked like it should, bluetooth as well, no turning on here and turning on there again (HTC Home Prob), ...
now, after i have downgraded to WM2003, merged the ExtROM and upgraded to WM2006 again, i am experiencing loads of problems!!
the "turn wifi on"-bug occured, i could not turn wlan adapter on with one simple click on the icon in CommManager...
then, after a softreset, the device froze while booting (there is some other thread about that problem). so i had to perform a hardreset again...
i configured my device again and installed the various cabs again, but in the end my device turned out to be totally screwed... turning on wlan was a pain, message-windows in which u can normally choose one of the available wifi spots were text-less (just empty window, only headlines visible...)...
so, i had to hard reset my blueangel the second time today and am now sitting in front of a fresh install of WM2006, thinking about what to do.....
what cabs should i install?
which HTC Home cab is actually the "best"?
any known problems regarding PPCContacts Manager?
do you thinkl, that those problems are somehow connected to merging ExtROM?
disappointed,
krz
ps: can anyone recommend a good backup problem, which saves me from setting up all settings all over again after eacah hard reset(timezone, regional settings, device id, reg tweaks, ...) ??