Related
Hi,
here's the replacement for the bluetooth icon shown in the taskbar.
It doesn't improve anything. It just contains other BT icon set... ehm... which I just drawn.. )))))
It should run on WM2003SE devices with MS BT stack, but i only tested it on my XDA2 with 2.06SE
comments are welcome...
buzz
thx
IT WORKS GREAT!!! THX Buzz_lightyear
Good Work Buzz!
Definitely looks a lot better than stock!
Re: thx
xp said:
IT WORKS GREAT!!! THX Buzz_lightyear
Click to expand...
Click to collapse
hehe, nazdar, teba som cital tusim niekde na ce4you.cz ... )))
buzz
and how do you switch back to the original ? by uninstalling the cab ?
snorlax said:
and how do you switch back to the original ? by uninstalling the cab ?
Click to expand...
Click to collapse
It is not that easy, coz the dll is used by the system and locked for deletion. So if you just uninstall it, it says, that it can't delete it...
You must edit your registry manually to disable my dll first and then uninstall it from Start -> Settings -> System -> remove programs.
It's a bit hard to deal with these system files. It is not like if you have some regular app, which you just install and then uninstall... (
1. Correct your registry to default:
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"="BTIcon.dll"
2. Reset
buzz
have been having this missing BT icon since I first had my JAM. Previously Buzz's headset enabler brought my BT icon back but after a hard reset and install the BT icon is missing again even with Buzz's headset enabler. Will try this replacement BT service cab and report.
still no BT icon for me
BT Icon sometimes doesn't load after soft-reset
Hello Buzz! 8)
Fine work with your Icon... I have found the new icon after flashing my Italian Qtek 2020 to the ROM cooked by Dr.Stein for Brix03 with WM2003SE... in fact in his extended ROM there is your CAB. But Sometimes the Icon disappear, and more on, about 50% times I make a softreset, your Icon doesn't appear in my tray. But Bluetooth works smooth, the same. How can I start the icon independently? Thank you!
Cristian :wink:
Re: BT Icon sometimes doesn't load after soft-reset
tesking said:
Hello Buzz! 8)
Fine work with your Icon... I have found the new icon after flashing my Italian Qtek 2020 to the ROM cooked by Dr.Stein for Brix03 with WM2003SE... in fact in his extended ROM there is your CAB. But Sometimes the Icon disappear, and more on, about 50% times I make a softreset, your Icon doesn't appear in my tray. But Bluetooth works smooth, the same. How can I start the icon independently? Thank you!
Cristian :wink:
Click to expand...
Click to collapse
...will take a look at it...
buzz
...long time lurker; first time poster...
did a search on this once and if it's here, sorry i missed it:
what is the reg-locale for ensuring the Bluetooth System-Tray Icon is enabled to launch when bt is active. since performing the following reg-edits, it no longer appears.
Increasing font cache and screen performance:
"HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE"
Change "limit" from "8192" (default) to "16384"
Increase general performance:
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" to "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
Enable Cleartype in landscape mode:
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
Change "OffOnRotation" to “0”
also... i did this one and then reversed it since i learned (after the fact) that cingular 8125 is already b/g:
Enable 802.11g:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS
Assign a value of 1 to dot11SupportedRateMask
Assign a value of 8 to dot11SupportedRateMaskG
thanks to anyone making time to reply!
can someone confirm that their actually is a bt icon that resides in the system tray (top bar) when bt is enabled???
maybe it was a fluke that i actually saw it there for a brief period today?
maybe i'm seeing things?
I have not seen that icon in WM5. But I would like to have it there.
Oh its there alright. In fact, in the online help somewhere on my 8125 it actually lists the icons and their descriptions. One of them is the BT icon.
Its beyond my why there isn't an application that can indicate with a headset icon to notify you if your phone is paired to a BT earpiece. Someone had posted once PhoneAlarm did it, but alas. It does no such thing.
If anyone else knows of a program that will tell you if you're currently connected to a BT device, please speak now!
Ok, found out where the icon is listed. Go to the main WM5 online help on the device and go to Personalizing your device>Over of the Today screen>What do these status icons indicate?
Towards the bottom you'll see the icon... IT EXISTS IT EXISTS!... sigh
it does because today... it appeared for a moment. it played peek-a-boo while device was bugging-out. glad to know i wasn't seeing things. i wonder if having the clock reside in the sys-tray has anything to do with it???
i have found this application http://www.pocketpcfreewares.com/en/index.php?soft=1319 to at least show when the BT is on. It also tries to connect to a headset when there is an incoming/outgoing call. Not having a headset myself, I have not been able to test this function, but bt does turn on on a ring and turn off when I end the call.
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
majdi said:
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
Click to expand...
Click to collapse
Thanks! This .cab works great.
Now I only need the same type of icon for wifi. Anyone got such .cab file???
Works Great on KJAM JASJAR and EVEN A T O M !
Thanks.
I tried it on my k-jam but unfortunatelly... nada
I downloaded the cab file to my pc through the link, then copied the file to my devise and run the installation therein...
Am i missing something?
Weird
I installed this, and nothing happened, so I deleted the program, using "remove program" from Settings/System, and it started working. Go figure.
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Styxer said:
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Click to expand...
Click to collapse
Also still searching for the wi-fi one!
It Does not work on my QTEK 9100. It actually warned me that it's not compatible while trying to install..
Hi
I want to phone to keypad lock itself automatically as a normal mobile do. There must be a setting for this? As for now I have the lock thing in my today screen and have to press it. I often miss and hit something else and the phone calls people all afternoon while in my pocket. Somewhat anoying.
/d
Would be nice to have a device lock that didnt take up so much space on the today screen.
knowsleyroader said:
Would be nice to have a device lock that didnt take up so much space on the today screen.
Click to expand...
Click to collapse
Then look for the DeviceLock CAB file and assign it to a hardware button so you can remove it from the Today Screen (just like I did last week ).
Did a search for that cab file, but didnt find it. Where is it supposed to be?
/d
i used vjkeypress with the link -133 which will lock the device and assined it to my comm butten because i don´t use it that often and have it in my tray also
I cant seem to install the devicelock.cab on my Blue Angel ... is it because it wont run on WM2003 or some other reason maybe.
Does anybody know about another program for key locking the BA?
Cheers
xdjneo said:
I cant seem to install the devicelock.cab on my Blue Angel ... is it because it wont run on WM2003 or some other reason maybe.
Does anybody know about another program for key locking the BA?
Cheers
Click to expand...
Click to collapse
You might want to ask that in one of the BA forums, this is a Wizard Forum...
Frezzor: How do you assing the shortcut to the comm button? I can only choose installed program when assigning the buttons.
/d
Is there anyway to easily rotate the screen on the prophet (besides turning it around in your hand) other than going into settings display and changing it there?
Ive tried the registry changes to add an icon but they dont seem to work.
thanks
Try PHM key tools.
V
Well i just figured out i can do it using the built in buttons app in settings :roll: but i ideally want to keep all the existing buttons. For now ive mapped "Comm manager hold" to rotate but I want to add another button cnofig i.e OK button hold that would rotate.
I have found the registry keys which control the buttons but need some assistance in understanding them. I can copy an existing key and with a bit of fiddling have "Button 6" appear in my buttons panel but I need help configuring it to map to a button and function in the correct manner
Hello
The Orange SPV M600 came with a little desktop icon, everytime you touch it, it rotates the screen landscape portrate, left right etc.
I am guessing it operates the built in system settings. I found a CAB in the Orange Extended Rom, if it will work, I do not know, you take the risk.
I have included it here for you to try.
It Works!
NewSPV said:
Hello
The Orange SPV M600 came with a little desktop icon, everytime you touch it, it rotates the screen landscape portrate, left right etc.
I am guessing it operates the built in system settings. I found a CAB in the Orange Extended Rom, if it will work, I do not know, you take the risk.
I have included it here for you to try.
Click to expand...
Click to collapse
Thanks 'NewSPV'. I lost this functionality when I upgraded from the M600 Rom to the Dopod ROM. Glad to have this back, as it also frees up the re-mapped 'Communication Manager' button I used to Rotate the screen. :wink:
Hi,
I installed MoDaCo screen rotate on my Qtek s200.
I finally have an icon on my Today screen!
One little drawback tho, everytime I tap the screen icon it rotates 90 degr. to the left. So the second time I tap it's upside down in landscape. The third tap brings it back to normal portrait mode.
I had hoped it just would rotate left or right and then back left or right.
Now I have to turn my phone to find the icon.
Edward
NewSVP Thanks for the CAB. Works great.
nypra1314, how is the MoDaCo screen rotate different than the M600 cab? Also where did you find MoDaCo's? I searched the forums but no sucess.
Hi niker,
I will try the M600 cab later today.
The MoDaCo cab, I found also in this forum. didn't know it until I installed. In ActiveSync\ Software it is mentioned as MoDaCo.
Thanks!! Will give MoDaCo's version now.. Cheers!
pt_screenrotate acts the same as ScreenRotate from MoDaCo. :-(
One other drawback tho, I can't locate it in software installations, to remove it, because PT is 88Kb and SR is only 42!
How do I uninstall PT_ScreenRotate please?
Edward
try AEButton
phoneAlarm has a nice little exe in it's directory called rotate.exe which flips between landscape and portrait, rather than going from right handed landscape, upside down, left handed landscape and back to portrait.
I'd post it here, but I'm sure it's copyright software. You'd probably get it in the trial version.
Wisbar 2 has function to rotate screen , with it installed you can set a hardware button to rotate portrait/landscape
On my M600 I just hold the Comm Manager button to rotate screen...
I would like to know please if it is possible to change the Tray shortcuts like Removing the battery icon or modiying it . I know that Tray launcher can add application to tray but it cannot remove the default ones . If someone would guide me on HOW to do it i'll be thankful
Tray icons reg settings.
"dword:00000000" - disable, "dword:00000001" - enable
Power icon
[HKEY_LOCAL_MACHINE\Services\Power]
"ShowIcon"=dword:00000000
Rotation icon
[HKEY_LOCAL_MACHINE\System\GDI\Rotation]
"EnableTray"=dword:00000000
And wireless icon
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
"Keep"=dword:00000000
Use WIKI and search
thanks dude.
How do I enable the battery icon on top of the taskbar near the clock like in WM6 cause it mine it doesn't show by default.
Someone please help me get that up so that I can also remove the battery and rotation icons from the bottom small taskbar.
1ceMaster said:
How do I enable the battery icon on top of the taskbar near the clock like in WM6 cause it mine it doesn't show by default.
Someone please help me get that up so that I can also remove the battery and rotation icons from the bottom small taskbar.
Click to expand...
Click to collapse
Use this tool it will be very helpful.
krishan2207 said:
Use this tool it will be very helpful.
Click to expand...
Click to collapse
Dang, it's busted for me.
I get a DirectoryNotFoundException when I launch it and I can't seem to find the reason for it.
Worked nicely for me, thanks!
It also works nicely for me. However, I am looking for a way to disable the System Tray and so far, nothing. Have tried most of the reg hacks mentioned here and run into a brick wall as my Dell Axim x51v doesn´t have those reg entries (?!?!?!)
All I want to do is remove the WiFi & BT icons so that the system tray will close. Any ideas folks?
That is because your device uses different drivers for it. However it should not be too hard to find the correct registry entries for your device. Try playing with entries in HKEY_LOCAL_MACHINE\Services\ dir.
Thanks Wexx. Even with the extended ROM visible I only get as far as "HKEY_LOCAL_MACHINE\Services\" before I lose my way. What really *isses me off is that I HAD managed it a while back but cant for the life of me remember how!!!!
Anyway, thanks!
krishan2207 said:
Use this tool it will be very helpful.
Click to expand...
Click to collapse
This is Tool Not work on My Blue Angel WM6 Helmi
Why?
ajie said:
This is Tool Not work on My Blue Angel WM6 Helmi
Why?
Click to expand...
Click to collapse
This tool is working perfect on my Blue Angel "XDA2s" WM6 Helmi.
What error do you get?