Whenever I have to soft reboot (button reset), it starts vibrating and playing a tune for a couple of minutes.
Anyone tell me how to stop this please? I havent spotted a config setting to turn it off.
Hmm, the only thing I can think of is that it's in your notification queue somewhere - though that's a long shot. My Exec certainly doesn't make any noises or vibrations.
What's the music of?
What 3rd party programs have you installed?
Ant
Related
Cingular 8125
I have 3 issues...
1. The backlight seems to shut itself off every once in a while. I'll try to wake the phone from sleep mode only to notice there is no light, so I have to move the phone near a light source to see the dimmed screen and work my way to the backlight setting and increase it back to normal.
This happened once while I was driving
Is there a cure for this problem?
Also, I noticed spb pocket plus's backlight slider on my today screen does not work, nor do the shortcut commands it has for backlight up/down/loop etc.
2. When I was testing a new ringtone, I called my phone from another phone. I noticed it does not receive the call on the first ring. It receives it on the 2nd ring. I can hang up during or right after the first ring and not have it come up on my phone. Is this normal?
3. Alarm bug. This %$#@ lead me to hard-reset my phone 3 times already. When my phone is in sleep mode and an alarm triggers, sometimes the phone won't wake, but keeps playing the alarm. I wake the phone manually only to notice there is no alarm notification, but a flashing orange light and constant alarm sound and vibration. A soft-reset seemed to make the problem worse. Finally, I found a program called memMaid which lets me delete notifications and duplicate notifications etc. Is this the best method to cure this problem?
Thanks in advance.
With the backlight, do you have it on charge at the time of it messing up?
i've had this issue but only when the phone was on charge.
if i unplugged the phone, backlight came back and then i simply plugged it back in
other than that, no cure that i've found. what software version are you using?
for the alarm, not seen that, i have noticed that recently i've had the alarm apparently going off (but it hasnt!) and then almost 2 hours later, i have a msg saying "alarm" with the dismiss button and the time of when it was supposed to go off. very odd. luckily i have a nokia 6230i that i use as my alarm clock.
and for the calls... i have the same problem but only when i copy over my SMS back onto the device. after hard reset its fine, but as soon as my msgs go back, i think the phone mem gets slower. (i have 1600 sms now on the phone with about 300 contacts with pictures)
I have the same issue with sms where the phone will light up, 5 seconds after it recieves the sms... so i'm guessing thats the same as the phone side, it lights up on my end, 3-5 secs later it rings (which is eqiv to one ring on their side so it hangs up after 2 more rings).
very strange issues though, i hope softwre updates fix it because it is annoying me now!
also have an issue with my camera where if you dont X out of it, then dont expect it to load again unless you reset the phone. it just shows the "egg timer" and thats it. useless camera software but great pda/phone. again luckily i have a camera always with me anyway.
Only thing i have experience with this is for 1).
I still get that backlight problem.
It started happening when i installed PocketZenPhone beta.
After every soft reset, if i let the phone go into standby or the let the backlight time out, the backlight setting will go all the way to the lowest.
I don't know how to fix this bug, only thing i've done to sort with it is have a Today Screen launcher set up so that i have an icon that leads directly to the backlight setting, so whenever it dims on me, i'm 2 thumb pushes away.
Actually, this is the first time i saw this, when i installed zen on mine too!
It was then i realised that if you unplugged the power supply then replug it in, it fixed it
in the end, i got fed up of zen's stability or the lack off so i removed it, hard reset etc
it still happens but very rarely, and when it does, its just because i've turned it off and on while it was on the power supply
i have the same freaking problem with backlight. not sure what the deal is but very very annoying. is there a fix to this problem??
i have the same freaking problem with backlight. not sure what the deal is but very very annoying. is there a fix to this problem??
Mine had the occasional "backlight set to off" (i.e. pushing the 5-way would NOT turn it back on - had to use Control Panel applet) problem too. I never used Pocket Zen Phone on this phone (have on others in the past) but did use both SPB pocket plus and Phone Alarm.
I think the problem is somehow related to apps that try to control the backlight. As you've noted, SPB's backlight applets don't do anything, I think that PZP and Phone Alarm, as part of their attempts to control the backlight in their profiles mess it up somehow.
What i did was limit my profiles in PA to only two, and make sure both of them were set exactly the same way as far as controlling the backlight:
o Both profiles have backlight set to 50% all the time
o Both profiles set to power off the backlight at 3 minutes on both AC and battery
o Both profiles set to suspend the device at 2 mins on battery (so never getting to the "backlight only power-off" setting above).
o Having the backlight go dark on AC is new for me, but it keeps it consistent with the battery setting, but it's no biggie and if it ain't broke...plus if I touch any button it comes back on
I also removed SPB pocket plus and found some freebie utilities that do what I wanted from SPB.
So I'm not positive it's related, but doing these three things and i haven't had the light go dark since. Every once in a while after a reboot the light does go dark, but hitting any button or the 5-way brings it back so it's not the same "setting has been set to no backlight at all" problem I was having, and only seems to occur soon after a reboot, and then not again.
-JMS
i fixed my problem by flashing rom over with 2.17 US version.
Hi,
I've got two niggly problems with my TyTN:
1. Despite having the power options set to 'turn off device if not used for' set to '2 minutes' the phone never actually powers off, the backlight goes off but I can still see the screen text and buttons remain active. (the only thing running in the background is Spb Pocket Plus).
2. Two days ago I set the alarm for 6.30 AM, it went off, i then adjusted it to 7.30 AM. This morning the alarm went off at 6.30 AM and 7.30 AM (I double checked the settings and there is only one alarm set).
PS. I also have a keyboard which doesn't respond perfectly to every key press although I am finding this is improving the more I use it.
I add point 3) e 4) :
3) Sometimes when alarm rings I can't see nothing... no Notification...just the ring...therefor I can't stop it!!!
4) It's happened two times... I set sound off... through comm.manager ( I'M SURE) and after a while when my friends called me the phone rang! It's strange don't u think?
philask said:
Hi,
I've got two niggly problems with my TyTN:
1. Despite having the power options set to 'turn off device if not used for' set to '2 minutes' the phone never actually powers off, the backlight goes off but I can still see the screen text and buttons remain active. (the only thing running in the background is Spb Pocket Plus).
Click to expand...
Click to collapse
In my TyTN this problem seems to be connected to phone module. In fact when the phone module is inactive, my TyTN correctly sleeps. Moreover when it is in charge and when the backlight off timeout is set to greater time than sleep timeout, I can observe that the device correctly sleeps.
El_Mar1ach1 said:
I add point 3) e 4) :
3) Sometimes when alarm rings I can't see nothing... no Notification...just the ring...therefor I can't stop it!!!
4) It's happened two times... I set sound off... through comm.manager ( I'M SURE) and after a while when my friends called me the phone rang! It's strange don't u think?
Click to expand...
Click to collapse
this happened to me yesterday! Alarm ringing but no notification and no chance to turn it off!
After 3 hours the red led was still flashing and the problem was there...
Solution? Hard reset :evil:
nicolochi said:
El_Mar1ach1 said:
I add point 3) e 4) :
3) Sometimes when alarm rings I can't see nothing... no Notification...just the ring...therefor I can't stop it!!!
4) It's happened two times... I set sound off... through comm.manager ( I'M SURE) and after a while when my friends called me the phone rang! It's strange don't u think?
Click to expand...
Click to collapse
this happened to me yesterday! Alarm ringing but no notification and no chance to turn it off!
After 3 hours the red led was still flashing and the problem was there...
Solution? Hard reset :evil:
Click to expand...
Click to collapse
3) Can happen if you go and remove alarms from the notification queue, for example memmaid can be used to do this.
Or use check notifications - see my post here http://forum.xda-developers.com/viewtopic.php?t=60426&highlight=
I just resolved by mammeid. MUST have software
I had this same problem on my TyTN, also could be fixed using MemMaid - the old alarms stopped ringing after deleting the clock.exe entries in the Notification queue.
However, the alarms STILL aren't working ok, because any time I set a new alarm when it rings I don't get any notification so I can dismiss it, so it keeps ringing until I delete it again using MemMaid. Any idea of how can I fix this?
Thank you.
Marques said:
I had this same problem on my TyTN, also could be fixed using MemMaid - the old alarms stopped ringing after deleting the clock.exe entries in the Notification queue.
However, the alarms STILL aren't working ok, because any time I set a new alarm when it rings I don't get any notification so I can dismiss it, so it keeps ringing until I delete it again using MemMaid. Any idea of how can I fix this?
Thank you.
Click to expand...
Click to collapse
I deleted all the entries using MemMaid... then I soft-reset and now I don't have any problem using alarm! Notification appears again so I can stop it!
Marques said:
I had this same problem on my TyTN, also could be fixed using MemMaid - the old alarms stopped ringing after deleting the clock.exe entries in the Notification queue.
However, the alarms STILL aren't working ok, because any time I set a new alarm when it rings I don't get any notification so I can dismiss it, so it keeps ringing until I delete it again using MemMaid. Any idea of how can I fix this?
Thank you.
Click to expand...
Click to collapse
I have exactly the same problem on my 838Pro now (used to have this happened to me on my 818Pro as well. Didn't know what to do, so I hard-reset).
Marques, are you able to try what El_Mar1ach1 has tried, that is to delete all Clock entries using MemMaid and do a soft-reset? Create new alarm using Clock and see if you get any notification.
I could have tried that myself, but unfortunately my unit is in the service centre, and won't be getting it back until tomorrow or day after.
I have a good restore on my storage card that will bring this problem back for me to try when I get my unit back, so that at least if this happens again in the future, we will all know how to resolve it.
Yesterday wasn't working. Today I tryed again the same procedure and it's back to normal. Working again...
Meanwhile I installed PocketAlarm (http://pocketalarm.iit-bsuir.com/indexen.htm) and I'm starting to use it instead of the system alarm.
Do you guys know any other nice alarm applications to test it out?
Hi there. I opened up my Wizard (thinking I was ultra-cool) to fix a keyboard problem that I have been having (in landscape mode, the touch-screen doesn't work)...
After doing this, I landed up with a second problem. The volume slider doesn't work. Now, I can't scroll but more importantly, I can't mute calls (aka silence incoming calls, put the ringer off)
Whats the alternate solution? After several hours of research, I'm thinking this is the possibility. I can use a program like smartskey and re-assign the mute functionality to another button like the END button. For example, if a call comes in, the first time I hit END, it will silence it and the second time I hit END, it will ignore the call. Is that possible?
Please help. I am totally dependent on my wizard for EVERYTHING!
I am having a problem with the volume levels for notifications. The volume for notifications (Gmail, text messages, etc...) will randomly become very low. This makes it almost impossible to hear the notifications. The volume settings are still set to the max volume in settings but the alerts are barely audible. When this happens the volume in better keyboard sounds on keypress is also reduced when this happens.
If I soft reset the phone by powering off and turning it back on everything returns to normal.
Apps that I have installed on the phone are
Better Keyboard
Brightness Level widget
GPS toggle widget
Retro clock widget
TasKiller
Tmobile Visual Voicemail
Weather Widgets
Anyone have any clues ???
Thank you
I thought I was crazy... I have the exact same problem. For the record, I have a good amount of the same apps installed too. I have a cover on my phone and I was thinking for some reason that was it, but the only way to make it return to normal volume is powering off and back on.
I've got the myTouch 3G.
possible app issue?
I ended up removing the GPS toggle widget and have not had the problem in the last couple of days so it may have been related to that app. Ill keep an eye out and see if it happens again.
Hm, I don't have that widget or the brightness level widget installed. I've noticed that it will happen and then go back to normal sometimes without restarting the phone... just by opening/closing random apps (at least I've yet to see a pattern).
Very weird.
Data issue.
If you have recently flashed any ROM that doesn't have the correct kernel to support media sounds that come standard with your device...it can corrupt the files within that specific folder.
More-or-less, it's like making an "unauthorized" change, but your phone recognizes that, so the volume settings do NOT function properly due to some form or interruption from elsewhere.
I would suggest downloading a third-party application such as Volume Control to keep the settings RUNNING as an application and not just a system setting.
In my case, I haven't touched anything like that. As far as rom, it's exactly as-is from the T-Mobile box.
It's driving me crazy because my ringtone is also effected. Sometimes I can't hear my calls even if I'm in the same room with the volume at 100% and other times it's inappropriately loud because of this issue of it going back and forth.
Factory reset / data wipe.
If you have uninstalled or NEVER added any third-party applications to your device to utilize those toggle features or settings for volume adjustments...then I would suggest a FACTORY RESET or "hard reset." This will simply wipe your phone back to the obviously stated "packaged" form.
This will remove any potential issues that could have been caused by an application conflicting with the system.
Good luck.
My phone will vibrate in my hand/pocket as if it is receiving a notification but nothing comes in. I go and check all the apps but nothing. It's always a quick double vibration. Is there a way to see which so is causing it? I have had Wakelock installed for awhile but am not sure what to look for.
So it appears that the phone is switching to vibrate on its own. I have no apps that are setup to change the volume nor do I have quite hours. Any suggestions?