Hi,
I have a very annoying problem. When someone is calling and I don't want to pick up the call there is no option to put the Hermes in silent mode !!!
Even when I change the volume to "Off" the phone still rings !!!
Only options I have are "Accept" / "Reject".
Please if anybody knows a solution to work around this problem, let me know.
Thanks a lot
Bukshi
If u press jogdial towards downwards when somebody calls u then it will silent the ringer !
Thanks vijay_kumar
It works !!!
I'm using AE Button Plus and have redirected the jog buttons (volume sliders) to be up and down, but that has resulted in not being able to use the jog buttons (volume sliders) to silence the incoming phone call as mentioned above. I've tried all variations of the "Restore volume slider" options in AE Button Plus - but nothing has restored this "silence ringer" option. If anyone knows of a workaround or registry hack or whatever, please let me know.
I have the same problem as Xilicon, I use AEbutton and I tried all sort of settings to be able to put my Hermes silent when it is ringing (I don't want to reject the phone call). NO success
Does anyone know a another way to put the Hermes silent workaround ?
I use my 8525 in a side case and when the phone rings I usually pull out the phone to see who's calling to decide if i want to answer... though 9 out of 10 times i accidentally hit the answer button. I always lock my phone via device lock on today screen... is there a reg hack or setting which will allow me to disable or customize ALL the buttons (when in lock mode) on the 8525 so I don't accidentally answer. to me if i were to assign a button (ie power or ptt) to only be allowed to accept a call (when the phone is in lock mode) that'd be great. I'm tired of auto answering and what good does a device lock do if you can easily auto answer?
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
abricko said:
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
Click to expand...
Click to collapse
Sorry you're not getting replies and I have no solution of the type you are looking for sadly. I've tried to replicate what you say happens but it's not easy!!! My key is not that easily pressed and I always put the device back with screen towards my body - my fingers don't seem to get very close to the green button.
This is probably daft to suggest but have you checked the setting that lets you specify auto answer within X number of rings - just in case it's answering the call by itself!!. (apologies if you checked this setting already!!)
Mike
This may do what you want...
http://www.pocketmax.net/smf/index.php?PHPSESSID=da5459e6aadc9c38d5a74b0276782091&board=19.0
Auto Answer is not set... the problem is (and it's a problem with the phone design) when the phone is locked none of the buttons respond until you hit the power button and then unlock the phone via the screen (which is good).
However when there is an incoming call or reminder the screen turns on and then a few buttons are active on the phone (send, end and the two soft keys seem to be). So when a phone call comes in, if the phone is in your pocket or the hip case while reaching for the phone it's VERY easy to accidentally press any of the active buttons and then accidentally accept or reject that call.
I've searched everywhere I can think of and I find little mention of this problem and no mention of a fix, most screen lock replacements only do as much locking as the WM5 built in lock does. The button re-activation after an incoming call is probably something built into the hardware. That's all I can deduce from this.
Thanks for the responses I've received so far.
I am on my fourth PDA phone and have used both Win Mobile 2003 and WM5. They all behaved this way and it is one of my biggest complaints with the Windows OS. I have seen apps for Palm that solve the problem. How hard could it be to have the option to only wake with the press of the power button?!
not hard at all, but the again its M$, i am surprised these devices to have ctrl-alt-del keys.
Hey guys,
I have htc touch with wm6 and need to turn ringer off (not reject call) on incoming call. The volume button on left side of pda is quite uncomfortable to use, therefore i think better solution is small program,that switches ringer mute on/off.
Can anybody write such small program for me,that will write needed value to registry (if needed - i can find which one), or tell me how and where(which program language,enviroment etc) write the code at leaset
Thanx!
if you press and hold button 4 (comm manager) often it will put the phone into silent (vibrate) mode
alex0n said:
Hey guys,
I have htc touch with wm6 and need to turn ringer off (not reject call) on incoming call. The volume button on left side of pda is quite uncomfortable to use, therefore i think better solution is small program,that switches ringer mute on/off.
Can anybody write such small program for me,that will write needed value to registry (if needed - i can find which one), or tell me how and where(which program language,enviroment etc) write the code at leaset
Thanx!
Click to expand...
Click to collapse
Laurentius26 seems to have incorporated a function on his latest rom for the kaiser where on an incomming call, the option to "silence' appears on the left hand bottom of the screen...
can anyone hack this from the kaiser rom....
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
When there is an incoming call, i press the mute ring button under the slide answer but it doesnt work. The graphic shows that the key is pressed but the ring still keeps ringing.
I just realised that when this happened, my (hard) call key also not functioning. although i can still use the phone on screen button to get to the call log. Anybody have solution for this.
Note: after i soft reset, the function is back to normal but will be the same after few days.
seem like i have decided to buy the wrong os mobile since thereisnt seem to be much help here