Dear friends
I have an issue on my JASJAR WM5 and I hope you can help me.
I was using QTEK and i-mate both with the same outlook datafiles but different profiles. All my emails are downloaded on my datafiles and I synchronize the datafiles with ActiveSync. with these two devices no problem.
After I bought my JASJAR i receive this message using the system the same way. Any help? Any ideas?
PLEASE ADVICE
look around on pocketpcthoughts.com....
i guess there was an article called "Activesync error codes explained" or something....might help
if not on ppcthoughts, try googling for Activesync error codes explained, and u might find it
S
Related
What is the best way to set a Hotmail account through Inbox ?
I installed Pocket Hotmail but, after I create a new account in Inbox using Hotmail, this account does not show up with the other Accounts.
Moreover, if I go to my Hotmail account using PIE (msn.com), I can read my received messages but NOT the attachments, whether they are standard pictures or Word documents or whatever.
Any clue ?
Try installing the Windows Mobile 2003 patch.
Its available at: http://www.frieger.com/photmail/wm2003.html
HTH
Hi Qman
I installed the patch, but unfortunately nothing happened.
Thanks anyway
Tekflow said:
Hi Qman
I installed the patch, but unfortunately nothing happened.
Thanks anyway
Click to expand...
Click to collapse
Sorry to hear that, I guess its still not ready then. Maybe you'll have better
luck when the full version is released.
Try the New version 2.5 Beta
Hello
give their New version 2.5 Beta a try it might do the job http://www.frieger.com/photmail/beta.html
regards.
Othman
I tried the both V2.2 with the WM2003 patch and V2.5 beta and no luck
No luck for me, either!
In the previous version, after creating the account, I couldn't find it.
With this latest beta version, I found the account I created, but the inbox showed empty (although, actually, it was not).
Ok found another Hotmail program called HTTPMail ($5.00 to buy) by Adrian Software and its working great on my WM2003 upgraded XDA I. So can somebody give it a try on their XDA II and report your results.
HTTPMail can be found at:
http://www.pocketgear.com/software_detail.asp?id=9539&associateid=148
HTH
HTTPMAIL
i just downloaded that free trail programm.
now the following problem,
I can I ensure that Hotmail dails internet, and my normal work mail (pop3) dails another number (as set up under conncetions).
As i believe mail can only dail one number.
Re: HTTPMAIL
lummac said:
i just downloaded that free trail programm.
now the following problem,
I can I ensure that Hotmail dial's internet, and my normal work mail (pop3) dial's another number (as set up under connections).
As i believe mail can only dial one number.
Click to expand...
Click to collapse
You've lost me on the dialing, confirming you're connecting via GPRS, right?
If so why are you using (2) different connections?
no Gprs
I use internet trough a dail-up connection
and i retrieve e-mails trough a pop3 server (work)
And now i want to have one e-mail account calling work, and the other internet
Dailing problems solved
Ok solved the dialing problem
So it is calling internet, but now some other problems, like not known protocoll.
Re: Dialing problems solved
lummac said:
Ok solved the dialing problem
So it is calling internet, but now some other problems, like not known protocol.
Click to expand...
Click to collapse
Strange, confirming that you have hotmail set as your "Domain" in your Inbox settings and "HTTP" selected as your Account Type?
If so try doing a soft reset and see if that helps!
HTH
Iam getting further
It connects, and has downloaded all my folders from Hotmail, but they are empty.
What am I doing wrong. I really like this one to work
it works - it works
thanks guys. this is it, I am very happy.
I forgot to tell how much to download,
:roll: so it downloaded my folders, but nothing in it.
he this is super
THANKS :lol:
Qman thanks. Finally a good solution that works
Hiya,
Ive just purchased HTTPMail and got it working nicely on my xda2 over a bluetooth connection. The only thing that isn't working is the sub folders. It downloads the folder names but none of the content.
Any idea's anyone?
Chris
deleted duplicate message
deleted duplicate message
Landofnod said:
Hiya,
Ive just purchased HTTPMail and got it working nicely on my xda2 over a bluetooth connection. The only thing that isn't working is the sub folders. It downloads the folder names but none of the content.
Any idea's anyone?
Chris
Click to expand...
Click to collapse
Thats good news on the bluetooth connection, thanks!
BTW just checked my online sub-folders and they're empty too, so go figure! :wink:
But here's a long-shot, while at your Hotmail Inbox, go to Tools, Manage Folders and check the folder that you want synchronized. Let use know how this works out!
Also it would be nice if you deleted your duplicated postings, it appears that your send key may have got stuck!
HTH
I've searched and haven't found any help at all with this. I'm trying to sync my 9100 with outlook 2003 sp2 as indicated in the title. I can establish an activesync connection and sync notes and files as well as explore the device and install software, however whenever I try to add tasks, contacts or calendar to the sync options I begin to get an error.
Basically what happens is that it will save the settings and then I get an incomplete sync with an error code of: Support Code 85010014. I've searched the microsoft site and can't find this code anywhere. I've followed the activesync 4.0 troubleshooting guide, but since I am establishing a connection that doesn't seem to be the problem. I've been a PocketPC user since day one so I'm not new to any of this, but I'm really at my wits end with this issue. I've hard reset and reinstalled activesync more times than I care to count. I can also still sync with my old jam just fine. Any help would be appreciated. Are there any unique configuration issues for 5.0 devices relative to Outlook 2003? Does it not like running in cached mode? Thanks in advance for any help.
If you are trying to connect to your home machine try:
Delete Any Partnerships From Activesync & the Device
Uninstall Activesync
Uninstall (Not Repair) Outlook - you'll probably need your Office CD for this.
Reboot
Reinstall Outlook
Reinstall Activesync
Cross your fingers
This has seemed to work for some people but not everyone.
There is a known issue with folder redirection on corporate networks. The Activesync team is aware of this and an upcoming version of Activesync will address it. For the moment the the only workaround is to turn off folder redirection. Unless you are a sysadmin, this is not likely an option for you. If you are in this situation, then unfortuantely you'll have to sit tight - like me.
Hope this helps.
db
I also had to uninstall both the latest outlook junk update as well as the junk update from office sp2 to get as4 working properly.
Success. What worked was to delete my current Outlook profile and account and then set it up again. The first time I did it I didn't delete the outlook.ost file and the new account settings just referred back to that file and I had the same problem. The second time around I deleted that file, configured my outlook settings and got that working and then syncing started to work as well. It took a little time, but has been working well since then. Thanks for the help. It's really strange that my jam and ipaq continued to sync thru AS4.0 just fine, but the qtek wouldn't. Appears to be some weird combination of WM5.0 and AS4.0 that causes the problem.
Hi,
I've just bought a new Qtek 9000 - and have immediately run into ActiveSynch problems :-(
With both ActiveSync 4.0 and 4.1 I can sync non-Outlook data (e.g. files or favorites), but cannot synch Calendar or Contacts.
I can explore the device as well, so I assume the USB connection is good
When synching I get the error:
"Attention Required" and when I select this, I get a dialog indicating
"Support Code 80004005" (same error is shown on the Qtek Activesynch status as well)
However, my old Toshiba E755 is still synching perfectly with both 4.0 and
4.1 on the same PC (I have tried removing it's connection, to make sure that isn't affecting JasJar connection).
I thought the 80004005 error indicated a problem accessing Outlook data on the PC, but (I assume) the fact that the Toshiba still syncs indicates that Outlook access is ok? (I'm using Outlook 2003)
I've tried uninstalling/reinstalling both versions of ActiveSynch, deleting
the devices in ActiveSynch and hard/soft resetting the PocketPC.
Apologies if the answer to this is already on the forums somewhere - I've spent an hour or two looking in in vain... (and a lot more trying to fix the thing!).
Thanks in advance for any help/advice
Steve
I have a similiar problem... with my Outlook 2000 SR-1.
By the way, the first sync "worked" but some phone numbers missing.
Anybody any advice? Thanks.
Re: Error 80004005 in Activesync when synching calendar/cont
thefixer said:
Hi,
....When synching I get the error:
"Attention Required" and when I select this, I get a dialog indicating
"Support Code 80004005" (same error is shown on the Qtek Activesynch status as well)
Click to expand...
Click to collapse
I seem to have found the problem, at least on my machine.
It was somehow associated with my PST file, I suspect because it was an 'old' one (created in a version of Outlook pre 2002, probably Outlook 97 Originally).
Hard-reset the phone, and set up the identity (if you don't want the default). Changing the identity after the first sync works seems to break it again, so do it first, after a hard reset!
In Activesync (I used 4.0 to get it working, but haven't tried 4.1), make sure all partnerships are deleted. Then add a new PST file, make this the default for mail delivery and remove the original. Then use File->Import in Outlook to import all your old data. Then attach the phone, form a partnership and do the Sync. Warning - the first Sync is very, very slow.
One problem though. Now the Toshiba no longer synchs (!) though I can explore it.
-Steve
Hi,
I have a Qtek 9100, with ROM 1.6.7.1.
I've set up an IMAP account, and even installed a personal certificate. When I'm composing an e-mail, there's an option screen where two disabled checkboxes appears:
Encrypt Message
Sign Message
There's no way to enable those, and there's no place to find some reference to it. I really need to read and send S/MIME encrypted messages. I thought that AKU2 will solve this, I haven't yet got a version with AKU2, but I was wondering if someone knows how to enable it.
Searching thru the registry, there's even a handler registered for smime (exsmime.dll) and the DLL is in \windows.
At first I thought that this setting was only available to local outlook e-mail, but it doesn't work either.
Does someone know if there's a way to enable this, or if this will only work with Exchange server?
I'm kind of exhausted about this, we've implemented e-mail encryption via S/MIME some time ago, and the device is unusable for me.
Any help will be really appreciated.
Thanks.
Have you tried smsEncrypt?
www.smsencrypt.com
I know this has been asked a few times, but this time the problem involves the DHD aswell. I got my DHD sync'ed with 3 exchange accounts and one of them gives a failure with contact synchronisation. The error is described as the Sync Protocol Error.
After various tries to disable/enable account, remove/add account and factory resetting the device I started looking after this problem on Google and such. Because the DHD isn't that old most information I could find applies to different phones and or different android versions.
So does anyone else encounter these problems aswell?
Hello mate
WizardX said:
I know this has been asked a few times, but this time the problem involves the DHD aswell. I got my DHD sync'ed with 3 exchange accounts and one of them gives a failure with contact synchronisation. The error is described as the Sync Protocol Error.
After various tries to disable/enable account, remove/add account and factory resetting the device I started looking after this problem on Google and such. Because the DHD isn't that old most information I could find applies to different phones and or different android versions.
So does anyone else encounter these problems aswell?
Click to expand...
Click to collapse
Did you search this topic? I know this has been discussed in one way or another in the past.
I found this links....don't know if this is what you need or look for but it's something
http://forum.xda-developers.com/showthread.php?t=822336
http://forum.xda-developers.com/showthread.php?t=797733&highlight=exchange
http://forum.xda-developers.com/showthread.php?t=819672&highlight=data
Cheers,
None of the links you paste does apply tot this error. I also bought the Desire Z to see if that solves the issue, but it remains. I guess this has something to do with the current firmware.
Same problem
Hi there,
I have the same problem on my Desire Z.
Factory reset works and syncing the first time works, but after updating a number of contacts in outlook it fails to sync these changes and the sync-error appears. At first I thought it had something to do with linking your facebook and other accounts, but not linking any of these still showed the same error.
I'm new to Android, so does anybody know where I can find an error log?
Regards,
Bas.
From the options mobile settings in your Exchange OWA you can create a server log. But as far as I can see no issues can be seen serverside.
hey, solution is here:
http://forum.xda-developers.com/showthread.php?p=9928087#post9928087
It seems comon to any android phone
We have a lot of problems with exchange sync in android phones.
In order to clarify the issue some general info:
Corporate email Exchange 2003 updated with SPACK's and fixes
We have 50 iPhones and some iPads working well
We have 200 HTC Wildfire with conitnous "sync proctocol error" and similar problems
In the past, we used Nokia E71 with Mail for Exchange or E72 with built in client with no problems
Also tested Windows Mobile 6.5 with any isue as well
So, the problem is not in the server side. After diving in a lot of threads, the only "solution", found by us, is to remove the account and setup again, the smartphone will work por undefined period of time.
Any Idea?
Today a new issue comes!!! Updating the server certificate, we have ONLY in android phones ".. The server certificate is invalid ...."
Thanks for your help