Related
Hi there!
I've recently got a M500 and I have a cellink BTG-7000 Bluetooth GPS Reciever.
I can pair the M500 & Reciever but when I go into the Tom Tom Navigator it does not find the Reciever when I go to Preferences. (there are com ports there but no matter what port I select it doesnt find it)
Any ideas why?
Hi,
I had simular probs. after pairing with another BT device. Just paired with the GPS & all was fine, so
- make sure the GPS is the last paired device
- create a com port for the GPS
- try upgrading radio
- get another BT stack
I'm having the stack from here http://forum.xda-developers.com/viewtopic.php?t=33532 but can't say it solved it or not. But it works & I can use the BT GPS & a BT earpiece at the same time.
Good luck, M
How do I create a com port for the GPS? I dont seem to have that option.
My BT stack asks me whether to create a com port for it when I pair with my GPS. Also under the BT connection settings I've got a tab which read 'COM ports'.
Cheers, M
Mine doesn't have any of these options, strange?!
I guess thats the problem, it seems my M500 doesnt let you manually assign a port.
Any ideas on a fix then?
I am on radio 1.12 & got those options from radio 1.11 on. You can try the updated BT stack from the thread 'O2 mini new BT stock'
Maybe that helP as well, otherwise upgrade your radio.
Cheers, M
Take the wired gps, baudrate 9600 en after that test some comports. It takes a while when TT detects the receiver, so hold on a bit. Most of the time it is comport 4 or 5.
what version are you using, i had similar problems,
I found that if you install version 5.1 or 5.2 straight on then it will not find the gps.
i installed the original 5.0 from cd. then got GPS working. TomTom may ask you to reset the device to configure gps [it did for me].
i then upgraded to 5.1 then 5.2 and everything works perfectly.
what version are you using, i had similar problems,
I found that if you install version 5.1 or 5.2 straight on then it will not find the gps.
i installed the original 5.0 from cd. then got GPS working. TomTom may ask you to reset the device to configure gps [it did for me].
i then upgraded to 5.1 then 5.2 and everything works perfectly.
I initially had the same problem with my BT GPS device and tomtom 5.0, but pairing them just before loading up tomtom and setting it to COM 5 and then waiting a while seemed to solve it!
Good luck!
Got-it!
Duh!
I must have missed something here, so I'm posting this for the few people who are thicker than I must be;-
When setting the BT com port under 'Bluetooth settings', the outgoing com port selection window is blank.
HOWEVER, choose 'settings>system>bluetooth setting' and voila!, that is where you see that COM5 is pre-chosen. (Why there needs to be a double-entry is another matter?)
Hope this saves someone some time.
Hi All,
With some tricks I managed to install TomTom 5 navigator but I'm having trouble connecting it to the GPS bluetooth mouse from Rikaline 6033.
I paired the device and assigned serial port com6 to it but I cannot see port com6 within TomTom.
TomTom bluetooth support is installed.
Any suggestions?
Tried this freeware?
http://www.bluetooth.jazztel.es/
Good luck!
"Pocket Bluetooth Tools adds the missing Bluetooth functions to the O2 XDA II (or other compatible PDAs like the MDA II).
The current version includes:
Support for Bluetooth Headsets and Car kits (Headset and Handsfree Profil). You may use up to 9 devices at the same time and you do not need to bond the again.
Support for the SSP profile (serial port), e.g. for GPS receivers or modems
Support for ActiveSync (synchronization with Outlook and Internet connection)
Switch Bluetooth on and off automatically
The current version 1.60 of the ROM includes already a virtual serial port but unfortunately it is a dynamic port, which is not visible to many applications. Also the ActiveSync support is difficult and complicated to use and if you want to synchronize with different computers you have always to couple the device again.
For future releases I plan the following improvements:
Support for Bluetooth network access points
Send contacts and files through Bluetooth"
Thanks for your suggestion but two things make me hasitating...
I have a qtek S200 and the software is clearly designed for XDAII and similars.
I do have sertial port profile (assigned port 6 to the GPS mouse)
The only thing is that I do not see the serial port com6 in the TomTom application.
riiiiighhhtt,
ive had this problem with tomtom 5.0 and my bluetooth GPS device, but dont be dismayed, there is a solution! I hope that this can be applied to you and your bluetooth mouse, ...
ok, as far as i can tell there is a problem with tomtom 5.0 and the avaliable com ports. In your bluetooth com manager you can choose any avalible port, but tomtom 5.0 will only give you a few of those to choose from. Ok, to make this work, you just need a hexeditor on you pc, there are even some for the pocketpc so you can do it all on your device.
so, what you need to do is, go into tomtom, select a port for your bluetooth device (even if its not the same one you chose in the bluetooth manager) then quit out of tomtom and then sync your device, and explore it in windows
ok in:
/my device/program files/navigator
there is a file called:
naviagtor.cfg
what you need to do
is open that file up in a hexeditor, and once open it should look something like:
...................a.*....."................[email protected]domain.com$x8ysvy.n: COM7:...............
Where COM7 is the selected bluetooth port you chose in tomtom
All you need to do is change it to:
...................a.*....."................[email protected]domain.com$x8ysvy.n: COM0:...............
Where COM0 is the com port you chose in the bluetooth manager, for your specific bluetooth device
save, and now copy the navigator.cfg file back to you device, from whence it came, and then restart tomtom
it might take a little longer than you might expect, but it should now pick up your device, ... however, if you want it to continue to work, DO NOT GO IN TO THE TOMTOM BLUETOOTH PORT A SELECTOR AND CHANGE ANYTHING, as this will reset the navigator.cfg file and then you have to go through the whole process again!!
If you have a few devices you want to connect to tomtom, i would suggest setting them all up on 'dummy' tomtom ports, then setting up the REAL ports in the bluetooth manager, then changing the navigator.cfg file in a hexeditor. Once you have a decent .cfg file, save it to your memory card, JUST IN CASE, you mess up your tomtom bluetooth and need to work while you're out and about
hope that helps
lucasbuck
what version of tomtom are you using, i had the same problem on my wizard with version 5. when i updated to 5,21 from the tomtom site it added the extra com ports in tom tom and everything worked fine.
Ady B)
This is what I did today on my XDA Mini S. It's collected from this and other forums.
First I had to install the GPS icon on the PDA in settings/connections using a freeware registry editor.
STEP 1: ACTIVATE THE GPS CONTROL PANEL
1. Start up a registry editor
2. Go to: HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings 3. Delet the Dword in there and the value and replace them with:
A new DWORD called "Group" and give it the value of "2" (dec) 4. And create a new string called "(default)" with no value (I think there was originally a string called redirect, rename this "(default)" if it's there 5. The GPS panel will now show up in your connection settings. (check it does)
note: you may have to soft reset after each stage if it appears not to work straight away but i managed to make these changes then saved them soft reset and then went to control panel in settings and a GPS option was there. You'll need this for the next stage. Wait about 1 minute before doing the soft reset.
STEP 2: Set up the GPS & Tomtom
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In the GPS control panel, select the GPS program to 6 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 6 free. Select COM 6 and close TT5.
5. At the GPS control panel again, now select COM (none) 6. At BT: select OUTGOING port to 6.
7. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
If you follow the above exactly it should hopefully work.
Dave
davidkw said:
This is what I did today on my XDA Mini S. It's collected from this and other forums.
First I had to install the GPS icon on the PDA in settings/connections using a freeware registry editor.
STEP 1: ACTIVATE THE GPS CONTROL PANEL
1. Start up a registry editor
2. Go to: HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings 3. Delet the Dword in there and the value and replace them with:
A new DWORD called "Group" and give it the value of "2" (dec) 4. And create a new string called "(default)" with no value (I think there was originally a string called redirect, rename this "(default)" if it's there 5. The GPS panel will now show up in your connection settings. (check it does)
note: you may have to soft reset after each stage if it appears not to work straight away but i managed to make these changes then saved them soft reset and then went to control panel in settings and a GPS option was there. You'll need this for the next stage. Wait about 1 minute before doing the soft reset.
STEP 2: Set up the GPS & Tomtom
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In the GPS control panel, select the GPS program to 6 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 6 free. Select COM 6 and close TT5.
5. At the GPS control panel again, now select COM (none) 6. At BT: select OUTGOING port to 6.
7. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
If you follow the above exactly it should hopefully work.
Dave
Click to expand...
Click to collapse
Ok Dave, I did exactly what you did, and thanx a lot, it's working quite well !
But something annoying is happening: I have to do the BT part EVERY TIME I launch TT5 (It actually asks for it, password, COM port etc...) !!
As if my pairing wasn't saved...
Any advice ?
Thx
JD
How does the Prophet perform with TomTom and MediaPlayer running at the same time?
Sluggish?
On the Prophet, you learn one thing very quickly:
Never launch 2 programs at the same time ! :lol:
tomtom
hi which hexeditor did you use and where did you download it from. unable to get one with the script line like you typed. help much appreciated.
cheers
hi there,
sorry to trouble you again. would it be possible for you to give a more descriptive explanation regarding the editing with the hexeditor.
cheers
This is how I did it:
1) Pair the two devices, non secure connection
2) Settings/Connections/Bluetooth/COM Ports - Select a new outgoing port
3) Select your GPS and assign COM Port
4) Start TomTom Settings - select "Another GPS"
5) Select the same COM Port as above
Wonderful combination, selling my Explorist 500
hi there,
i am having the same problem as niobium. anyone solved this problem! please let me know. help much appereciated.
cheers
niobium said:
Hi All,
With some tricks I managed to install TomTom 5 navigator but I'm having trouble connecting it to the GPS bluetooth mouse from Rikaline 6033.
I paired the device and assigned serial port com6 to it but I cannot see port com6 within TomTom.
TomTom bluetooth support is installed.
Any suggestions?
Click to expand...
Click to collapse
TOM TOM 5.21 GPS PAIRING
But something annoying is happening: I have to do the BT part EVERY TIME I launch TT5 (It actually asks for it, password, COM port etc...) !!
As if my pairing wasn't saved...
Any advice ?
JUST TRY WITHOUT THE SECURE CHECKBOX MARKED !!!!!!
Thx
JD[/quote]
Re: TOM TOM 5.21 GPS PAIRING
educa said:
JUST TRY WITHOUT THE SECURE CHECKBOX MARKED !!!!!!
Click to expand...
Click to collapse
Yes that was it
Thx
JD
Thank you!!!!
(secure checkmark) worked like a charm!!!
I was ready to toss my device out the window.
Now hopfully when I get in the car, my Handsfree and GPS won't kill each other!
Thanks again
Alternative Bluetooth GPS Receiver Setup for Tom Tom Navigator 6
davidkw said:
This is what I did today on my XDA Mini S. It's collected from this and other forums.
First I had to install the GPS icon on the PDA in settings/connections using a freeware registry editor.
STEP 1: ACTIVATE THE GPS CONTROL PANEL
1. Start up a registry editor
2. Go to: HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings
3. Delet the Dword in there and the value and replace them with:
A new DWORD called "Group" and give it the value of "2" (dec)
4. And create a new string called "(default)" with no value (I think there was originally a string called redirect, rename this "(default)" if it's there
5. The GPS panel will now show up in your connection settings. (check it does)
note: you may have to soft reset after each stage if it appears not to work straight away but i managed to make these changes then saved them soft reset and then went to control panel in settings and a GPS option was there. You'll need this for the next stage. Wait about 1 minute before doing the soft reset.
Dave
Click to expand...
Click to collapse
I came unstuck at this point and had to fiddle around until I finally managed to get my BT GPS device to talk to my phone and TTN6. The following steps worked for me.
1. Pair your BT GPS with your handset BEFORE installing TTN6 (or 5 for that matter).
2. On the handset go to Settings > Connections > GPS, set the GPS Program port to COM8 and the GPS Hardware port to whatever COM your GPS device uses (mine uses COM5). The Baud rate should be set according to your GPS device's manual (mine is 4800).
3. Install TTN6 on your device and follow the setup. When asked, select whichever BT GPS receiver you're going to use and use COM8 as your communication port (if it hasn't appeared, go back to step 2 and try using COM9 instead of COM8).
4. Exit TTN6.
5. Go to Settings > Connections > GPS again, but this time set the GPS Hardware port to "(None)" and the GPS Program port whatever COM your GPS device uses (again, mine uses COM5).
6. Restart TTN6. The program should now pick up your BT GPS device.
If you're still having problems, I'm afraid I can't help much further. This worked for me, but I have a UK Orange SPV M600. It may not work for everyone.
Happy hunting,
Josh
niobium said:
Thanks for your suggestion but two things make me hasitating...
I have a qtek S200 and the software is clearly designed for XDAII and similars.
I do have sertial port profile (assigned port 6 to the GPS mouse)
The only thing is that I do not see the serial port com6 in the TomTom application.
Click to expand...
Click to collapse
Maybe I'm late or wrong, but you CAN NOT have the same serial port asigned to two devices!, depending on your version of TOM TOM you may be out of the serial port supported range....
BT serial ports are the same as the "old" PC ones.... one cable at a time....
Hope it helps.
Help before I kill my phone............
My head is going to explode at this rate.
Can anyone help me, at basic level, how to:
1. Get a reg editor, by name not just 'get a reg editor' as I have tried 2 now to no avail.
2. Is the GPS settings already in the registry to edit on my 02 mini S or do I need to get that from somewhere before I start?
Currently I can get the bluetooth to pair, can create another OUTGOING port and thats it. It wont actually give me any device even though phone is paired to it
Why cant it just be SIMPLE!!!!
BTW, Im running TTN6 and an 02 Mini S.
Cheers for now, Taff
I got tomtom (but version 6) working flawlessly with my S200. I assigned COM6 as the outgoing port for the GPS, then assigned COM7 as an incoming port. I enabled a secure connection. Then i disabled bluetooth and started tomtom (tomtom enables and disables BT automatically).
I added the GPS device as "other GPS device", waited a few seconds and there it was working.
Maybe the problem is your tomtom version being too old?
My GPS receiver is a BT-338.
I've been just about everywhere trying to get an answer to this, but no joy so far. I have just bought an O2 XDA Mini S PDA (ROM 2.21.4.1 WWE) running Windows Mobile 5 and a BT77 GPS receiver from Ebay. The problem is I can't get them to pair via bluetooth - this is what happens:
1. the XDA detects "BT GPS" (with a question mark icon)
2. the setup process invites me to select this device
3. I am asked for the "0000" access code
4. I then select "Serial Port" service (the only option)
5. Moving on to COM Ports tab - I create a new Outgoing Port and allocate it to COM 6 or 7 (I've tried both)
I've tried, methodically, every permutation available via the setup facility(secure/insecure pairing via check box, deletion and reset of XDA and GPS in between each try, COM 6/COM 7, etc.), but the GPS device does not pair (i.e. GPS BT indicator continues to flash every 3 seconds or so).
I know that the BT77 is OK because I've had it working nicely in Autoroute 2005 with a BT dongle in my laptop. Incidentally, I have TomTom Navigator 5.21 installed on the XDA.
I've scoured the online forums for an answer to what seems to be not an uncommon problem, but I can't find one. Is there perhaps a utility to fix this or a registry setting which can be changed maybe - I'm completely stumped!!! Can anyone help.............please?
Dave
i am having the same problem... tried installing BTH but that program does not even bother to show up
:?:
I guess the com 6/7 is unavailable. In my o2 mini with windows mobile 2003, i use com8 to pair, and working perfect. Try some software, such as gps viewer, to indicate the available com.
okay.. thanks.. will try now
sorted!!
I've found out how to fix this, but I had to buy GPSDash to do it (you may not if you can get a free version):
To get XDA to pair with BT77 via bluetooth -
1. use XDA bluetooth settings to set "BT GPS" to use COM7 - the BT77 will not pair by doing this;
2. install GPSDash2 (I did it by copying CAB file to memory card touching it with stylus in File Explorer or Total Commander 2 or and change settings of GPSDash to use COM7 (this is a handy app, but it's really
there to enable TomTom to find BT77 - not sure HOW it works, but who cares!!);
3. Run TomTom and configure GPS settings to use "Other GPS" and COM0;
4. find navigator.cfg (installed in \Program Files\Navigator) and copy it to PC;
5. using Ultraedit (hex editor),change 0 in "COM0" to 7 and then overwrite navigator.cfg on phone with
new version;
6. Run TomTom - it should pair with the BT77
Like I said, I bought a copy of GPSDash for a few quid - it's a nice little app to have for SatNav anyway, but you might be able to get a trial version or something - you don't have to run it or have it sat in memory for the GPS to pair, but it being there makes all the difference!!
Hope this sorts it for you
D
i, as an electronics engineer, have experienced that if anything can go wrong it will go wrong. thats exactly what happened with my installation of ttn5 n pairing of bt77.
now i can proudly say that i have done it and its working fine except for the POIs which i deleted myself. anyway, while pairing the bt77, i just chose factory reset for ttn5 and it detected the device automatically. but i think the Bluetooth tools are really handy by thus german dude. i havent tried but i think he will answer questions in english, supposedly.
i think i will pass on my knowledge to others so .... ask! 8)
n yea.. thanks to tomtom, i hope i never get lost again :lol:
still cant get it
i have followed instructions above but still no luck
i have gpsdash2 working great but tom tom wil still not pick up my bluetooth gps....
PLEASE HELP!!!
I installed BlueSoleil stack on my MDA Compact (Qtek S100), but now i can't connect Tom Tom 5 with GPS (Bluetooth).
Any ideas for this?
TIA !!
I found solution for this.
"1. Do a backup, in case you make a mistake. In some post someone recommended Sprite Backup, I went with that and it's quite Ok.
2. Do another backup, just in case
3. Search this forum on how to disable the default MS bluetooth stack, and then disable it. (Duh )
4. Search this forum on how to install the Bluesoleil stack, and install it. It has a 60-day limitation, but there's a file posted somewhere to get around that limitation.
(I tried the toshiba stack too, didn't work for me)
5. You should now have a BT icon again, tap it and open 'Bluetooth Manager'. Turn on your BT GPS, set up pairing and create an SPP link. When connected, check the properties to find out the COM port for the connection.
6. Start tomtom5 and find the GPS preferences. Depending on your BT GPS receiver, pick 'other bluetooth gps' and select the COM port from step 5, or pick 'Cable-NMEA-GPS' and select the COM port from step 5. For the Dectel BT gps, it's the latter one.
7. And there was much rejoicing."
Hi Good Peoples,
My first post here and I hope you will excuse my ignorance please. I am hoping that someone can help me, as I would pull my hair out, if I had the left. :shock:
I have an XDA 11s and I have installed TomTom software. The satellite receiver is a Haicom HI-701 BT (four in one Bluetooth) and I have a number of problems.
When I installed the GPS hardware, in the Bluetooth Services section I installed it as a serial port connection and have the enable service box ticked. Do I need any other boxes here ticked?
The Bluetooth Manager shows the Haicom shortcuts, but it does not connect on start-up. It has to be manually connected. Once it is connected, unfortunately it shows no dataflow, in either direction. I think that is the second problem. :roll:
The Bluetooth flashing light shows that the Bluetooth connection has not been made; what do I need to do to fix that?
When I start the TomTom, it shows that I have no GPS Device (now there is a surprise) and I tried to configure it using the NMEA option with 4800 baud rate. However I then have eight options ranging from infrared through to Bluetooth serial to choose from, and I'm not sure which one I should be using. I mucked around for hours and had working for about one minute, but unfortunately I can not repeat the trick.
Is there anyone out there who could be kind enough to please tell me how to configure the thing please?
XDA IIs
The XDAIIs is a BlueAngel - try posting in the correct forum next time.
Make sure that you have selected the "outgoing connection" - not the "incoming connection" when choosing the serial port in TT.
Also turn on BT and manually connect to the GPS first - somethimes I had to do that rather than rely on TT to do it for me.
You asked whether other boxes sould be ticked - what are these - I no longer have a BA and can't remember...
Charlie Grillo
oops sorry, I was not sure which forum to post it under as the BlueAngel did not specify IIs, although the picture looked like a better match.
I hate to sound like a total technical cretin but what is TT?
The other boxes are:
Authorisation requires
Authentication (Passkey) Required
Encryption required.
Thanks for the response.
TT = TomTom
I have found a fix for my XDA2 with Tom Tom and GPS BT-321 H
This was such a headache for me but through persistance - I got it working
This is how I did it
1. I downloaded - Bluetooth tool 1100 "BTHTools1100"
this help me to asisgn my Holox BT-321 to my XDA2 via bluetooth to port Com7
2. I then downloaded "GPSTuner_v5" & GPSmonitor1.1
These programes enable me to talk to my GPS and adjust PORT COM setting and also Band rate
having got these programes to work and pair with my GPS
the next step with TOM TOM6 worked fine trying different ports
All the Best to all XDA fans out there!!!
I have found a fix for my XDA2 with Tom Tom and GPS BT-321 H
This was such a headache for me but through persistance - I got it working
This is how I did it
1. I downloaded - Bluetooth tool 1100 "BTHTools1100"
this help me to asisgn my Holox BT-321 to my XDA2 via bluetooth to port Com7
2. I then downloaded "GPSTuner_v5" & GPSmonitor1.1
These programes enable me to talk to my GPS and adjust PORT COM setting and also Band rate
having got these programes to work and pair with my GPS
the next step with TOM TOM6 worked fine trying different ports
All the Best to all XDA fans out there!!!
Thanks, I have actually got it working with a combination of black magic, voodoo, good luck and threatening to trample on it. :wink: