I have a bug in my Exec:
whenever I start using my Exec, my backlight setting (within Settings/system/backlight/"turn off backlight if device is not used for...") REVERTS back to 10 seconds,
although I keep on changing the setting to either 30 seconds or a minute.
- I think i read before that someone else had encountered this bug in the past.
--Does anyone else have this?
--Does anyone know of a solution to fix this problem?
i'll appreciate any help ! ...this bug is really bugging me :wink:
nobody has any input :?: :?:
Are you running PocketZenPhone, or any other brand of profiling software? They might interfere with the behaviour of this setting.
mine acts normaly !!
SiliconeS:
No - I am not using PocketZenPhone.
Although I am still (not for long though!) using the o2 Active [i.e., the o2 Personal setting] which MIGHT have some profiling s/w - I am not too sure....
I am about to disable it within the next few days in any case - I hope that would solve the issue.
:arrow: Please write if you have any other insight considering the info I just provided.
First, a question: the maximum backlight time is usually 10 sec (in the Jasjar, at least). Did you change it using a registry tweak ?
I believe it is the keyboard backlighting that has the 10 second maximum. It seems the screen backlighting maximum for battery is 5 minutes through the settings.
I haven't had this problem at all by the way.
Tekflow:
I have the O2 xda Exec - so I am not too sure as to the settings in JasJar - as I haven't tried the i-Mate Rom yet;
I think Shivafool is right - I strongly doubt that the JasJar has a 10 second backlight limit - and the keyboard light is quite limited in time ...
In the Exec at least you can change it by going to: Settings/system/backlight/"turn off backlight if device is not used for..." (as mentioned above...) I am sure it is located in a similar place on the JasJar.
As to my own problem - I used SiliconS advise and looked for any profiling s/w within the Exec. I strongly suspect that indeed it was the O2 Active s/w, which has some profile settings, and which constantly over-rode the regular setting.
I am not entirely sure yet, but after I will change the o2 personal settings to Corporate (which would also disable the o2 Active s/w) - within a few days - I will know for sure.
I will post here if the problem will not be solved by that.
Thanx for all the help everyone !
Oooops, sorry, I thought you were talking about the keyboard backlight.
On a slightly different topic, my Backlight button on the front between the two speakers doesn't appear to work.
ashleyhall said:
On a slightly different topic, my Backlight button on the front between the two speakers doesn't appear to work.
Click to expand...
Click to collapse
It probably does work, but the problem is that it is an almost useless button. If you have your timers configured such that the backlight times out and goes off before the device times out and turns off, then during the time that the backlight is off and the device is still on you can press the backlight button to turn the backlight back on. AFAIK that's the only function for that button.
Brett
Related
Hi,
Sometimes my backlight does not switch on when I've pushed the on/off button for 1 sec to go out of the stand-by mode. I can see that the telephone is working but only without backlight. I don't know where I can find the settings. I'm using the Vario from T-Mobile.
Can somebady help me with this?
thank you in advance.
Regards Witte
maybe hard reset or rom update? , cant imagin what will do that unless somthing is hogging all cpu power perhaps
A reset will help but I'm not happy to update my ROM. I'm afraid for more problems.
witte_nl said:
Hi,
Sometimes my backlight does not switch on when I've pushed the on/off button for 1 sec to go out of the stand-by mode. I can see that the telephone is working but only without backlight. I don't know where I can find the settings. I'm using the Vario from T-Mobile.
Can somebady help me with this?
thank you in advance.
Regards Witte
Click to expand...
Click to collapse
Did you have the power cable in?
I have the same problem when i'm charging the phone.
When i press the power on button the light stays off.
Maybe you've got Spb GPRS Monitor installed on it?
Izzard-UK said:
Maybe you've got Spb GPRS Monitor installed on it?
Click to expand...
Click to collapse
Spb GPRS Monitor does this problem on my 9100 too, any software with SPB in the name seems quite buggy.. ;-)
OK,
right now I don't have the problem anymore but I'll will monitor it and maybe then I will uninstall the gprs monitor.
Thanks!! :lol:
witte_nl said:
OK,
right now I don't have the problem anymore but I'll will monitor it and maybe then I will uninstall the gprs monitor.
Thanks!! :lol:
Click to expand...
Click to collapse
You will.. do a search - I posted this a while back... they know about it.
Terran
MDA Backlight issue
I ran across a problem with the MDA, where I adjusted the Backlight settings. From there on the Backlight woulf not turn on unless I went to the setting control to adjust it. The fix: Go to backlight settings, set your brightness desired (maybe in the middle). Go to Battery power from the tabs that are currently listed. Make sure you have (Turn on Backlight when a button is pressed or the screen is tapped) Selected. Then press ok.
That should fix it if the issue you are experiencing is similar to mine.
I have the same problem with my artemis. And i think is from spb plus since the backlight control button from today dont even work on this new version. Or from phone profiles. Everytime i make a soft reset i have to reajust the backlight or when it turns off i have to make another soft for reajusting before it goes out. It's quite boring and i'm trying to find an app to replace spb with the close button and task button ant the today buttons shortcuts if is that the problem. And my artemis rom dont know why dont have the option on the backlight settings to turn on when screen tapped or key pressed.
Perhaps someone has an explanation why my backlight doesnt light up again when a button is pressed?
From time to time, the backlight goes dark and even though I am pressing buttons, screen, power button, etc, the backlight doesnt come back on. I have to search for the backlight adjuster (in the dark) in order to switch the light back on.
I have wisbar advanced and SpbPocketPlus installed - might that effect this somehow??
Thanks for any advice!
i have exactly the same problem and don´t know a solution. ;-(
Wisbar Advance 2.6.0.1 is installed, SpbPocketPlus not.
I think it comes more often if i use the camera, but it is not reproduceable...
I've never had this problem before, I dont have wisbar installed.
You may be doing a press and hold function on your device. Quick press of the power turns it off, a long press turns off the backlight. the only way to turn it back on is to long press the power button.
also you have settings that turns the back light screen off, which may be affecting this.
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Squuiid said:
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Click to expand...
Click to collapse
It hasnt happened lately (actually ever I posted this thread strangely enough) but its quite embarrassing when you have to find your way through a dark screen.
I put a large symbol of the brightness adjuster in one corner (using SpbPocketPlus), so I only have to find that symbol rather then start --> settings --> etc..... its not a cure but it makes it easier switching it back on.
If anyone has a remedy for this problem, please share...
Not sure why this happens, but I fixed it using...
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
This app - run on your prophet, and all is back to normal. Keep a copy on your SD card...
--Tosh
didn't help
I tried and still use the neo backlight fix. But this fix is only for forcing via startup a longer measured time for the light to stay on.
I too have suffered with the problem of the backlight not coming on every now and again after starting up the prophet. I've had this problem on numerous roms too which is interesting. What more interesting is that even in the days of my owning a Blue Angel (Orange M2000, MDA) I STILL remember having this intermittent problem with the light not always coming on. Only way I fixed it was to simply soft reset the device. Whenever I did that and when I do it now, it stops it happening for week or so at least.
I still use the neo back light fix too as my phone has the quick light turn off problem without it. Neo certainly created a good fix no mistaking.
All the best
Nicholas
i had the same problem...just put the same value to the standby and backlight ...( both 3 mins on mine)...and never happened again....i think it helps...
I have a strange backlight & power-off problem on my Qtek S200:
When the backlight is switched on and I press the Power button shortly to switch it to sleep mode, the screen gets blank but the backlight does not go off.
So now I wait first when the backlight timer goes off before switching the device to sleep mode manually.
Another problem:
When the power settings is set to switch the device off automatically, it reboots when the timer goes off. So my solution is to disable the auto power-off feature.
How to fix this to the original behaviour ?
I tried the neo_backlight_fix and set the backlight timeout to the same value as the standby timeout, but with no avail.
My Qtek S200 has still the original old ROM (G4 model) and Windows Mobile 5.0:
ROM version info:
IPL: 2.10.001
SPL: 2.10.001
GSM: 02.07.20
OS: 2.10.7.25
Please help me to solve the problem.
Maybe I messed up a lot and the only solution is to install a newer ROM which is available since some time at qtek.nl.
Thanks in advance.
Hello xda world. Like the forums... I'm new to PPC, but I've previously developed Palm apps.
I've had an x7500 for a week or so. Lots of messing around trying to get a configuration I like, and somehow I've managed to break it (maybe).
The backlight works fine - when there is no external power.
However, when external power is applied, the backlight goes to its lowest mode and will not honour the slider settings in the Backlight app.
This is really, really annoying. Any suggestions?
Is it a PPC or an HTC thing?
Thanks & regards
Devany said:
Hello xda world. Like the forums... I'm new to PPC, but I've previously developed Palm apps.
I've had an x7500 for a week or so. Lots of messing around trying to get a configuration I like, and somehow I've managed to break it (maybe).
The backlight works fine - when there is no external power.
However, when external power is applied, the backlight goes to its lowest mode and will not honour the slider settings in the Backlight app.
This is really, really annoying. Any suggestions?
Is it a PPC or an HTC thing?
Thanks & regards
Click to expand...
Click to collapse
i remember i had similar problem before, do you have Phone Alarm install?
Thanks for your help, but... nope no phone alarm.
(In the phone app right? I don't see any options for a phone alarm.)
hi Devany
not sure if you managed to find a resolution but i too had a similar problem.
i think mine was caused by phonemanager (which i have since uninstalled)
i found that when on battery power the slider in backlight settings did absolutely nothing. the only time the backlight would become brighter was when the alarm was going off.
searching throught the registry i found the solution.
navigate to HKEY_CURRENT_USER\controlpanel\backlight
change the onoffbat key to 1 (mine was set to 0)
once done press the power key down for ages to reboot.
my slider now works fine.
hope this helps
Daryl Mushtaq
My phone is always waking up for odd reasons (AVRCP commands, switching in and out of roaming, etc...), and I can't seem to get the darned thing to stay OFF.
Music A2DP streaming is the biggest deal to me, because not only will the device wake up when I press a remote command (on my AVRCP headset), it will also keep the device backlight on indefinitely. This is clearly shortening my battery.
I tried Slide2Unlock, and have it set to shut off the display if no activity for 5 sec., but the problem is that Slide2Unlock appears to not notice when it is woken up, and just sits there without turning the screen back off again! (a simple screen press brings Slide2U back to life, and then it will toggle the screen... but this defeats the purpose!)
There must be SOMETHING I'm missing here... doesn't anyone else have this problem???
I have 2 things for you. The first, is if you're using WM6 that's a known issue and unchecking the today timeout in start-->settings-->today-->items tab should solve most of your problems. The second is a little program that I found (not sure where at , but it might have been on here) called screen off. Install it and then set it to a hardware button and it will allow you to turn just your screen off whenever you don't need it on.
Maybe it depends on the player you're using? With Coreplayer, my phone's screen just flashes on and off quickly when it receives an AVRCP command.
Still doesn't explain the roaming thing though.
xeno1 said:
I have 2 things for you. The first, is if you're using WM6 that's a known issue and unchecking the today timeout in start-->settings-->today-->items tab should solve most of your problems. The second is a little program that I found (not sure where at , but it might have been on here) called screen off. Install it and then set it to a hardware button and it will allow you to turn just your screen off whenever you don't need it on.
Click to expand...
Click to collapse
Yes, I'm using WM6 on a HTC Titan (Sprint Mogul).
I don't currently timeout to the today screen, but I don't see how that would cause my problem really- I've heard people mention that before, so can anyone explain what difference that would make?
I already have a shortcut to screen toggle (wrote my own MortScript to do it). That's not a problem anyway since every media player can assign a button to toggle the screen- The problem is that it keeps turning the screen back on when a button is pressed no matter how many times I toggle!!
Plastriq, I've heard that coreplayer does that... that's how they deal with this problem. They're the only ones that have addressed it as far as I know, and I'm not about to pay for their app when I already have TCPMP and WMP for free.
I just can't believe that there haven't been more practical ways around this yet!
Whe I switch on my phone by pressing the top-right button, the phone is locked and the backlight is on. After 6 sec the backlight turns off.
When I unlock my phone, the backlight stays off
I would expect that the backlight gets on when you unlock... but it isn't.
Now I have to press the top-right button twice (to turn off and back on) and unlock within 6 seconds to get the backlight on.
This is very annoying.
Is there a way to get the backlight on after unlocking?
I have no solution - but can confirm that this happens to my phone too.
Hi,
Same problem here Found it very annoying so I just disabled the Backlight shut-off function alltogether
Regards,
Rolf (The Netherlands)
This seems to only happen if you use some kind of tweak that adjusts the auto-lock function. I used to use HD Tweak and changed the value for some auto-lock thingy (can't remember what it was).
After I hard-reseted it seems to have gone back to normal. So I would avoid any setting that changes the auto-lock thingy.
Note that uninstalling HD Tweak did not restore the correct functionality. Probably because I did not undo the changes prior to uninstalling.
So maybe you can try to change back the value first and see if it helps.
Good luck, I found that bug very annoying and decided I could live with no auto-lock.
Hi Saros,
Thanks for the input
Saros said:
Note that uninstalling HD Tweak did not restore the correct functionality. Probably because I did not undo the changes prior to uninstalling.
So maybe you can try to change back the value first and see if it helps.
Click to expand...
Click to collapse
I use HD Tweak aswell and had a feeling the Backlight Issue only occurred after enabling the Auto-Lock feature, thanks for confirming my suspicions. I DID however turn the feature back OFF in HD Tweak. Unfortunately that did NOT solve the problem
Don't feel much for a Hard-Reset at this point since it took me quite a while to get my new phone set-up correctly. Hopefully a fix will be available, I'll go browse through the HD Tweak topic to see if anything gives yet...
Regards,
Rolf (The Netherlands)
Rolf,
Disabeling the Backlight shut-off function is a good tip. Thanks.
But I still hope there will be a fix for this problem soon... so we don't use to much battery capacity.
Bart (Antwerp, Belgium)
I had this problem when i changed some registry keys. The following must be:
HKEY_CurrentUser\ControlPanel\Backlight\[AutoDeviceLockEnable set to 0]
HKEY_CurrentUser\ControlPanel\Backlight\LockLevel\[LockLevel set to 0]
marpam,
When I set the first regkey back to 0, the autolock doesn't work anymore.
When I manually lock the device by press and hold the down-right button (stop call), the problem still exist when you unlock.
I want to keep the autolock function, but with backlight back on when I unlock the device.
Bart
I had this same problem. I did a hard reset and again set auto lock in tweak then shut off backlight off and the problem is gone and now auto lock is fine.
You can also use Lumos - solved the issue for me
http://forum.xda-developers.com/showthread.php?t=450318