Trying to install Fonix Voice Central 3.0 Trial on my new Universal but keep getting an error stating unable to install as it is from a untrusted source or is an unsigned program.
Please help
the exact error when trying to install Fonix Voice Central v3.0 trial is :-
Installation was unsuccessful. the program or settin cannot be installed because it is not digitally signed with a trusted certificate
Please help, this is driving me nuts
steverae said:
the exact error when trying to install Fonix Voice Central v3.0 trial is :-
Installation was unsuccessful. the program or settin cannot be installed because it is not digitally signed with a trusted certificate
Please help, this is driving me nuts
Click to expand...
Click to collapse
Bizarre. The security level on Exec is open so you should be able to install any unsigned app. Have you got any other software on the gadget?
Found out the problem was caused by the default voice install file, ignore this and the program installs fine.
Havin performed a hard reset then re-install it took a while to realise this....
never mind, at least i found out what the problem was
just need to try ver 3.0 now
Is it any good then? Fonix?
well after all the tests i did, i found it bollox, pardon me french....
Okay, it can be configured alot but i found it really dodgy compared to MSVC.
My geordie accent might have something to do with this as well
The only benefit of this is the fact that it's suppost to read out your emails and stuff but i couldn't understnad the thing anyway.....
PLUS couldn't get it to work right with my BT Headset.
I my opinion, MSVC is probably the best, only problem i have with this is that it does not disconnect the BT link after it's finished.
Related
All Games / Apps using Visual Basic seem to have stopped working.
Shortcuts to *.vb links get the error:
"There is no application associated with ...... Run the application first, then open this file from within the application."
Other files get the error:
Error : 0x80040154
(Cannot open VBScript)
Is there anyway I can reinstall the Visual Basic runtimes on my Vario without doing a full factory reset.
Logic says there must be a way.
I do not want to do a reset and lose all saved texts, MMS, contacts and all the software I have installed.
Appologies if this post is in the wrong place or has been asked before.
___________________________________________________________
T-Mobile Vario
Windows Mobile 5
ROM: 1.6.2.4 WWE
Radio: 01.12.10
well, I have more or less the same problem, there seems to be a problem with the installation of the eVb runtime on WM5, even thouhg I succeeded once...But the webmaster of http://www.omnisoft.com seems to have found a way of bypassing these limitations, I haven't found the time to test his solution yet. Let's say that the firts to try lets the other one know how it worked out.
Any idea how they bypassed these limitations or how I can get hold of them.
Anyone else got any links / guides to this problem.
I have two Varios and one MDA Compact to fix this problem on so far and I really dont want to do a hard reset.
It seems that the main problem is not the scripting engine itself which installs just fine. It has to do with the various ActiveX controls (MSCE*.dll) that are not registered when you install the runtime, but are requested by most apps to function properly. Basically, the post on omnisoft.com explains what entries you have to enter manually in the registry to register these controls.
By the way, what setup did you use to install the runtime?
I used the W2003
VBScript just stoped working inc games/apps I downloaded + minor apps I wrote with Forward Pass.
I did not install the runtime, it was in ROM.
That is why I may have to do a hard reset.
Is there any link to the post on omnisoft.com?
Doesn't Microsoft have any VB runtime install that will fix this? It is their OS.
I tried to install ClearVue PDF from the O2 supplied CD and it failed (with error messages in German!) - however when I tried to 'remove programs' I get the above message and ClearVue is still listed under programs. Ditto with Skype. These are the only 2 things I have added since switching my XDa mini s on for the first time. How should I uninstall these properly....so I can start again! Thanks
Well if you want to install it. Try installing it again. Then if fails again download the latest version of it from their website and install that. Hopefully you will have the registration key installed and it will work. Otherwise you will at least have an English error message.
Thanks
I'll try the web site - looks like I can't just download ClearVue - does it all come witin the 'software update' bundle?
No no no! ;-) The Clearvue website http://www.westtek.com/pocketpc/pdf/ As long as the install you have made registered it the trial version will be installed as fully operational.
Thanks
I'll have a go...
Sometimes a program wont delete because its running. make sure you have nothing running before removing it
Is this not an issue with the persistent memory in the Wizard? I've never been able to uninstall things, always comes up with that error, but installing an AKU 2.3 ROM seems to have solved the problem.
I think it's a persistent issue - I've tried every way of uninstalling (from Xda and PC via ActiceSync etc) and ClearVue is still there (and not working). However last comment slightly too techy for me (sorry - just a user....)? Is this an OS upgrade....?
The ROM is an OS upgrade, read all about it here:
http://forum.xda-developers.com/viewtopic.php?t=53954&highlight=
Whether the newer ROM solves the problem, someone better informed than me will have to tell you. It may just be coincidence that I can now uninstall programs properly??
paulrockliffe said:
Is this not an issue with the persistent memory in the Wizard? I've never been able to uninstall things, always comes up with that error, but installing an AKU 2.3 ROM seems to have solved the problem.
Click to expand...
Click to collapse
Same here, ever since upgrading to AKU2.3 i haven't got that uninstall error *Knock on wood*
Hi Guys!
I'm using SuperMario Lite ROM (June 3) in order to test some usefull sw in my Blackstone in a system clearest as possible. I had tested many apps w/o problems and others that doesn't work or crash ..with consequent HS. Btw this is the first time i have found this problem and before doing the umpteenth "ROM sand-paper" should be intersting to find some solution in the reasonable future situation in which hard reset costs much more consequences.
The problem: I've tested JZ SmarMort v1.5 which has subsequently installed MortScript v4.2. Everything went well until I have decided to uninstall them. I have unistalled (in the order) JZ SmartMort and then MortScripts, btw beeing JZ SmartMort not uninstalling normally I have used (as suggested from SmartSmort) SDK Tools to unistall it completely. Than I have done a soft reset and now..???!
Any software I try to install gives the same result: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate." :O
I searched here in the forum but i haven't found solution yet.. anyway these are been my unfruitful attempts:
- Install SDK Certs --> same installation unsuccessful message as for any other progs
- Install Cert_SPCS --> see above
- Install Default Signed DisabledSecurity --> see above
- Install HD Tweak --> see above
- Change/Add:
[HKLM]\Polices\Polices 000010a DWORD: 1 (decimal)
--> nothing changes
I'd like to know Your opinions and suggestions.. anyone who knows how to solve this?
Waitin' for your replay.
NiceOne
(fN)
Try to find sdkcerts.cab on this forum.
FileFixer said:
Try to find sdkcerts.cab on this forum.
Click to expand...
Click to collapse
Hi FileFixer!
Has said in my previous post I've just tried to install SDKCerts.cab taken from here but not solved the problem. In fact, as for any cabs I try to install, I have the same results: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate." and then doesn't install.
Anyway THANK YOU very much for your interest and reply.
NiceOne.
fN
Problem solved HERE.
It can be close. THX!
(fN)
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
drehustler said:
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
Click to expand...
Click to collapse
Yeah it sounds like you had CF 3.5 on there before but somehow it didn't stay after the hard reset (which indicates it was installed sometime after the phone was first purchased).
The file you downloaded is to install it from your PC, not the phone. Put the cab file I attached here on your phone, run that, and it should resolve the issue
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
run this from your computer. http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
drehustler said:
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
Click to expand...
Click to collapse
Hmmm no, never heard of it, and basic searching turns up nothing but lists of odd HTTP error codes, that one included. My guess would be an issue with your browser on your PC, but I really couldn't say for sure.
You can also just run the file Rhodium500 linked to above, it's the same .msi file you put on your phone in the first place but couldn't get to run from there...it's an automated installer that just handles everything from your PC instead of you putting the cab on the phone manually.
thanks alot guys, still have no luck and since my phone is under warranty, i'm gonna get a new one. I got 2 htc tilt 2's and only mine is doing this? i'll be back.
dude getting a new touchpro2 wont help... i dont think... like the guy who posted the attachment said, just install it and it should work. if u cant download it use your friend's computer or the library
Dude I had the same problem and if you wait a few mins Ill find it in the microsoft website so you can try downloading from there. Just run it on your computer, then connect your phone with active sync. Go to programs> More> Add/Remove programs and click on the little box there. (I am not sure if the menu goes like this, im actually sure that it doesnt, but for some reason my phone wont connect the WMDM right now so i cant tell u) anyway dont return the phone just because of that cuz the new one might have a problem thats actually harder to fix
I dont remember where I got it from but Ill try to find the original place where I found it.
Heres the file
Microsoft Website
You can download it straight from their website. Its free and it doesnt hurt
thanks, just tried it and had no luck?? i can't even return my phone until the 12th so i'm still trying to figure it out.
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
drehustler said:
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
Click to expand...
Click to collapse
Just a hint; it seems that either resetting the device or ActiveSync seems to solve a lot of problems sometimes. Had the same that my device didn't want to accept new Exchange-settings I made on my PC. After resetting both, it worked flawlessly.
I still get the error about "not digitally signed with a trusted certificate" on my T-Mobile US HTC HD2. I downgraded my SPL and added the hspl. After that I flashed to the cell series EVO rom. At first I can install anything, and then after a few hours I get the error. Maybe the hard reset, or even installing marketplace is messing with it. I've tried a signer program, but it didn't work. I've also installed the new certificates and still nothing. Sorry for creating a new thread, but please help!
Based on my ssl secured exchange direct push experiecne you will need to install the actual certificate for the cab/server and if it is not a class1 certificateyou will need to install the root (class 1) certificate for it. Because you weren't clear with the exact details of your problem i'm only speculating as to what the problem is. Although i have just thought that if this is related to installed apps on to the device try copying them to the SD card and installing them from the device itself.
I'm new to all of this. As clear as I can get it, this stupid phone won't let me install apps after a period of time. Right after I flash the rom it prompts me with a yes or no, but later it goes straight to refusing to allow me to install. Its like apple's 3.1.3 and I lost my jail break or something! It says they aren't digitally signed. As far as installing the stuff, I don't know how. Any direction?
still cant install
I've been thinking about this and i can't come up with a reason as to what might cause it. So questions.
1) are you trying to run the cab files from on pc or directly on the phone?
2) Is it a specific cab file that you are using to this with or do you use any random one.
3) if you try to install app via activesync (.net compact framework 3.5 for example) does it install?
TMOUS devices actually have their own special board (http://forum.xda-developers.com/forumdisplay.php?f=631) it may be worth having a look there and asking. It may also been worth trying a different rom from the ones you have tried. The energy series of roms seems to be very popular and i'm trying it out for my first custom rom. No problems at all yet and it does work very well.
Can you Help
I have had my HD2 for 2 days now and have only just today tried activating my hotmail and facebook accounts. with no prevail.
i was told by another member of XDA to check out my certificates;
well i have no certificates at all except for the root 1's, i dnt seem to be able to add any either. im well n truely a noob when it comes to the HD2 and its stressing me out hard
can any1 please help
any help would be much appreciated
thanks tom