Qtek S110: wm doesn't start after softreset - JAM, MDA Compact, S100 General

As I get a PC-Pda connection problem I tryed to do a softreset; now my pda is stuck to the splash screen.
I can read all rom details (I never did an upgrade) and charging battery seems working good.
Anybody knows what can I try ?

Related

Help me fix my wallaby...white blank

I've upgraded the ROM from WM2003 to WM2003SE. My original Radio Stack is 4.16. I want to upgrade it to 4.21. My device is O2 XDA PW10A1. But I've got the wrong RSU. It's from T-Mobile not from O2. So my device can't go to the today screen anymore. It's White Blank now. The battery didn't work. So I have to charge it everytime. I go to the Boot Loader , and the "GSM ERROR" appeared. I pressed the action button , the this message appeared "GSM turn on.....f a i l !!" What should I do ?? Is there a way to save my device ?
do you find a solution because i have the same problem
I have also the same problem - did anyone find the solution?
I have also the same problem - did anyone find the solution?
nothing
haven't find any
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError

Qtek 1010 stays on boot screen after new rom install

Please has anyone had this problem, I know its old hat now but I just want to have 2003 on the phone, I can load 2002 no worries, works every time without fail but if I load 2003 it always gets stuck at boot up, I have tried a few different roms and all the same problem, I even tried 2003SE over 2002 through activesync and the same problem. I use sd to upgrade and all seems fine until boot up after the rom has finished loading.
I have spent hours searching the internet and nothing.
Any advice would be awesome......
stuck on boot screen
Have you tried just leaving it alone for up to an hour ,i have had a similar problem on my wallaby (O2 XDA) and i left it as i had to go out and when i got back in it was waiting for me to set the screen etc. If you then go into explore on microsft sync and go to the windows\startup folder u can see what programs it is loading that your device doesn't like. If it doesn't solve the problem then at least you have tried
stuck on boot screen
Have you tried just leaving it alone for up to an hour ,i have had a similar problem on my wallaby (O2 XDA) and i left it as i had to go out and when i got back in it was waiting for me to set the screen etc. If you then go into explore on microsft sync and go to the windows\startup folder u can see what programs it is loading that your device doesn't like. If it doesn't solve the problem then at least you have tried
I have left it for two days but yes anything is worth a try. What I can't understand is I had 2003 and 2003se on it about a year ago, then someone borrowed the phone for about a 10months and wrecked it and it wouldn't work so redid the 2002 rom and it worked but I have never been able to get 2003 or 2003se it boot from boot screen, it not my boot loader is it? I have 5.15
Thanks for the help
Well try this
It seems very strange indeed but i have had problems reloading all sorts of roms back into my wallaby,even the original o2 rom wouldnt boot for me and i had to reinstall 2003se ,which worked fine so i have the complete opposite of what you have.I.e. i can put 2003se on it but i cant put 2002 back on :shock: The only other thing i can think of is that maybe its the version of rom that you are trying to install?

Startup problems with a M600 need help

I have a Prophet (M600) G4 with the last HTC ROM and recently radio upgrade and everything works fine till in installed Resco keyboard and had to soft reset the device. Till then the device comes up normally with the Qtek welcome screen but during the next step to “the windows screen ??” appears a white screen and nothing happened after it. Strange enough hardreset don’t work and its impossible to enter the bootloader. Moving the battery and reset several times has no results. Try to flash it again but impossible because I have no connection to PC. Can someone help me please??
Help! My Dopod D810 dead, can only run bootloader
All ROM I tried are not accepted by bootloader. What can i do?
fuego_nl said:
I have a Prophet (M600) G4 with the last HTC ROM and recently radio upgrade and everything works fine till in installed Resco keyboard and had to soft reset the device. Till then the device comes up normally with the Qtek welcome screen but during the next step to “the windows screen ??” appears a white screen and nothing happened after it. Strange enough hardreset don’t work and its impossible to enter the bootloader. Moving the battery and reset several times has no results. Try to flash it again but impossible because I have no connection to PC. Can someone help me please??
Click to expand...
Click to collapse
qtek s200- prophet problem please help
After reset work but screen is blank with green and blue lines,can some body help

qtek 9000 suddenly turns off

after upgrading my universal's rom to Jwrightmcps Crossbow ROM Update 2.12.08 WWE, my universal suddenly turns off very often.
with other versions of wm6 it has the same problem.
i've updated my bootloader from 1.0 to 1.01 but still no result.
i can use the universal for a few hours but then when i open internet explorer for example it turns of and it won't boot. then after a while it boots again
has anyone an idea how to fix this?
I had excactly the same. Bought a new battery, and everything was solved. it may help..

[Q] hermes 8525 freezes

well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments
i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes
Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now
I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031
i cant start update proces always error 260 or 262
Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM
JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?

Categories

Resources