Related
Hi, I usually slide open just to power on the phone.
So, I would like nothing to happen when I slide the phone open when on the today screen..
Does somebody have an idea how to do this?
Are you talking about the Keypad QuickTasks?
You can easily find the option on Start -> Settings -> System Tab -> Keypad QuickTasks
Yes, I mean the dialpad quicktasks.
When this is disabled I get the dialer instead.
As a "workaround", you could just press the red "hangup" button after opening the phone to return to the home screen...
Royan
Royan said:
As a "workaround", you could just press the red "hangup" button after opening the phone to return to the home screen...
Royan
Click to expand...
Click to collapse
this annoys me too, i may write a small program that looks for the keyboard opened event, and minimises the phone program
this annoys me too, i may write a small program that looks for the keyboard opened event, and minimises the phone program
Click to expand...
Click to collapse
That will be cool!
Oh.. I've been using a certain "Yet another lock app" v1.2 or something like that... and I always set mine to lock and suspend everytime I do a right to left sweep (via FTouchFo). And everytime I slide the keypad, it automatically unlocks and nothing comes up; no quicktasks nor phoneapp). I'm not kidding... I don't know if it's a good "side-effect", but that's how it works.
can you post a link or the cab?
I hate the search function!
lostsoul said:
can you post a link or the cab?
I hate the search function!
Click to expand...
Click to collapse
i second this vince!!!Please post the cab!
This is where I found it.
http://forum.xda-developers.com/showthread.php?t=261277
I actually prefer this than any other locking app out there since this app uses the same built-in Device Lock program with a few nice modifications.
Enjoy!
Optional Alternative
I wrote a mortscript file to disable both menus
1. Extract
2. Place "Kill" folder in Program Files
3. Place run.mscr in startup
4. Reset
Enjoy
Simple fix for this
Hi there,
I just got my Niki a couple of weeks ago (with T-mobile in the UK) and this has been bugging me too ever since.
I figured that there must be a registry setting to control this somewhere as the Keypad Quicktasks are able to adjust this behaviour. Last night , I finally found it.
The setting in question is:
HKLM/Software/HTC/Biotouch/ActionScreen/Check
With the Keypad Quicktasks on, it is set to 1. With them off it is set to 0 and will instead launch the phone app.
Simply set it to anything else (e.g. 2) and both the Quicktasks and the phone application are disabled upon sliding open the phone. The active slide event is still recognised and sliding the phone open will still answer an incoming call.
Sweet.
fenallen said:
Hi there,
I just got my Niki a couple of weeks ago (with T-mobile in the UK) and this has been bugging me too ever since.
I figured that there must be a registry setting to control this somewhere as the Keypad Quicktasks are able to adjust this behaviour. Last night , I finally found it.
The setting in question is:
HKLM/Software/HTC/Biotouch/ActionScreen/Check
With the Keypad Quicktasks on, it is set to 1. With them off it is set to 0 and will instead launch the phone app.
Simply set it to anything else (e.g. 2) and both the Quicktasks and the phone application are disabled upon sliding open the phone. The active slide event is still recognised and sliding the phone open will still answer an incoming call.
Sweet.
Click to expand...
Click to collapse
you are a genius, problem solved! 10/10
winwiz said:
you are a genius, problem solved! 10/10
Click to expand...
Click to collapse
Agreed Thanks fenallen
i've come accross a problem - a reset seems to wipe the settings and has reverted to showing the phone screen???
Well it seems to survive a soft reset as well as power cycles with the battery removed so I presume you mean a hard reset, in which case ... isn't that the point of a hard reset?
I would be amazed/worried if it wasn't set back to default by a hard reset.
nope, i am on about a soft reset! i'll try again to see if it keeps the settings this time
Im happy to say it works fine, after i made a soft reset.
power on/off
it´s posible to change the action of the power buton hardkey?
thanks
Hi,
After a couple of days playing with the HTC touch HD I noticed that I can not lock the device anymore by long pressing the end key. I have looked into the settings and it clearly states that long pressing the end key should lock the device.
whenever I long press the key I see the some screen refresh but the device is not locked.
If I switch off Touchflo3D and show the device lock on the today screen, then the device gets locked. Could this be a bug in touchflo3D?
I would hate to have to perform a hard reset just to fix this issue...
If anyone knows a solution, please let me know.
Edit: well, I found the reason why this happens. Once you setup a password for your device, it stops locking the device using long press end button. It sucks, but I can live with it...
Looks like a hardreset is the only way to go.
Lucas0511 said:
Looks like a hardreset is the only way to go.
Click to expand...
Click to collapse
If I perform a hard rerset, will I still have all the applications that came standard with the like touchflo3d and google maps? or will I need to reinstall some of the applications myself?
You will have them. It will reset to factory settings, original ROM plus all installations HTC chose to put on the HD.
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
indup said:
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
Click to expand...
Click to collapse
in my case it was working fine....until it stopped working. Looks like a bug in touchflo3d, because you can still use the default device lock from the today screen. that one works...
david-v said:
in my case it was working fine....until it stopped working. Looks like a bug in touchflo3d, because you can still use the default device lock from the today screen. that one works...
Click to expand...
Click to collapse
yes that one works when you turn touchflo off but the touchflo end key press never worked.
Can someone confirm that you no longer get a choice of action for the Long Press End Key, i.e. it locks the device and that's it. On the diamond you are able to choose an action or choose the display choice list.
Thanks, cojo
cojones said:
Can someone confirm that you no longer get a choice of action for the Long Press End Key, i.e. it locks the device and that's it. On the diamond you are able to choose an action or choose the display choice list.
Thanks, cojo
Click to expand...
Click to collapse
You can configure it. standard it will lock your device, but you can also choose to show a choice list.
david-v said:
You can configure it. standard it will lock your device, but you can also choose to show a choice list.
Click to expand...
Click to collapse
A-ha...found it, they moved it to the Button setting (not one for reading the manual). Now...what about the 'Lock all buttons on device lock' setting?!
indup said:
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
Click to expand...
Click to collapse
This is the same with me and I've not touched push e-mail or exchange server settings. I've only had the phone for 36 hours so not done much at all. The first thing I went to try and do was lock the phone and it didn't work. I'm reluctant to do a hard reset as it didn't work out of the box.
Did you try a hard reset? Did it solve the problem?
no i didnt try a hard reset,didnt think it was worth it just try to get the lock to work.
Has anyone else had the same problem with it not working right from the start and tried a hard reset? If so, did it solve the problem?
spikeysas said:
Has anyone else had the same problem with it not working right from the start and tried a hard reset? If so, did it solve the problem?
Click to expand...
Click to collapse
I performed a hard reset and then it worked again. But after setting up exchange, it stopped working. The device lock on the today screen still works though, but not from touchflow3d
I decided to go for it and do a hard reset. The device lock still didn't work. All I had done was follow the original setup screens after the reset. During this I set up Lock with a simple PIN and to prompt for it after an hour of inactivity. If I remove the settings from Lock I can then use Device Lock on long press End key but I can't use both.
This is rather frustrating as I had simple PIN (paranoid as had an Ef stolen a few months ago so at least this would stop them accessing any info stored directly on the device as they would have to do a hard reset to clear it) and Device Lock set up on my Elf which worked absolutely fine.
Has anybody managed to get both working together on the HD? I use the Device Lock to stop any buttons being pressed when I don't want them to be and the PIN so it's harder for people to access any of my personal info if the phone is stolen (not that I intend for this to happen again!). I really would like both to work together!
Just spoken to CS at Orange and they have no idea if this issue with only able to have either Lock or Device Lock working at any one time is specific to my device or whether everyone is affected. If anybody is able to try and let me know their results I'd be grateful as I don't know yet whether I need to send the phone back as faulty.
spikeysas said:
Just spoken to CS at Orange and they have no idea if this issue with only able to have either Lock or Device Lock working at any one time is specific to my device or whether everyone is affected. If anybody is able to try and let me know their results I'd be grateful as I don't know yet whether I need to send the phone back as faulty.
Click to expand...
Click to collapse
Just confirmed that removing the password re-enables the device lock. Nice find!
I am on Vodafone.
I assume that one of the manila files in \Windows is checking a registry entry. I wonder if it is possible to make a change that allows both functions to co-exist.
david-v said:
Edit2: well, I found the reason why this happens. Once you setup exchange server for push mail, it stops locking the device using long press end button. It sucks, but I can live with it...
Click to expand...
Click to collapse
I have Exchange with Push and still works for me.
Steve James said:
Just confirmed that removing the password re-enables the device lock. Nice find!
I am on Vodafone.
I assume that one of the manila files in \Windows is checking a registry entry. I wonder if it is possible to make a change that allows both functions to co-exist.
Click to expand...
Click to collapse
Thanks for the reply. I guess that confirms that it's not specific to my device! As I mentioned before both functions did co-exist quite happily on the original Touch (Elf) so it is possible. I wonder if it is related to the newer style TouchFlo3D and if anyone experienced the same issues on the Diamond or the Touch Pro?
I hope it is something that could be sorted with "tweaks" to certain files or registry entries. If anyone finds out how to solve it I for one would be very grateful!
tnyynt said:
I have Exchange with Push and still works for me.
Click to expand...
Click to collapse
Did your exchange policy force you to setup a password? it appears to be the problem. When you setup the device initially with a password, then you cannot lock the device anymore using the long press of the end button. Device lock in today screen always work, the problem is the long press of end button, that stops working as soon as you have a passwaord set up.
Hi
Looked at S2U2 for a day or so. I have read the file son thier site but cannot figure this out.
What I want is to be able to press a key and invoke the lock like you can with any conventional phone. With S2U2 it seems you have to go to programs, and launch S2U2. Can it not be assigned to one of the 4 quick keys ?
Also can anyone explain the setting "lock when the device wakes up" ? Why would you want to lock the
device when it wakes up ? also "Lock when screen is blank" ? not sure what that means, afaics, my HD screen has never been blank.
thanks for any help
gt
lock when device wakes up is the best option.
kidnamedAlbert said:
lock when device wakes up is the best option.
Click to expand...
Click to collapse
Hi kidnamedAlbert
What exactly does this option mean, I find it very confusing. Surely when "device wakes up", I (the user) has done something to wake it up, so therefore I want to use it - not lock it. This option confuses me or Am I missing something here?
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
Sorry mate - no answer for you, but a question.
I'm about to upgrade to 1.48. Does that get rid of the auto lock for everyone then, or is it maybe a problem that you're having and others aren't? It's actually something that would make me think twice about upgrading!
wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
What do you mean you lost it ?? Just press the rightmost end button hard and you have a menu:
Power off
Lock Device
Set vibrate
Terminate Data Connection
This is default in rom [email protected]@@
You need to press & hold now. Before, you needed only to press it.
Let me get this straight...
If you press the end call button (just briefly) to put the phone in standby, when you press it again, do you get the lock screen??
Ahh that sucks, I want the old setup back. Any ideas?
I've just finished installing 1.48, and it works exactly the same as it previously did (for me).
wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
Start reading from this page
Start, then press "Lock" appkey in bottom left corner.
After that all ok. End call button now locks the phone.
I've had the same problem. What was suggested by locking the screen from the Start menu did fix the problem. This has happened a couple of times since installing the 1.48 rom.
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
just install BsB Tweaks 1.2 and enable this option!
btw. this is a very usefull option
crazyman1 said:
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
Click to expand...
Click to collapse
I can confirm that this exact thing happened for me. I couldn't open an email, so I locked it from the start menu, unlocked it, and could immediately open the email.
hbc said:
Start, then press "Lock" appkey in bottom left corner.
After that all ok. End call button now locks the phone.
Click to expand...
Click to collapse
Not for me :-(
crazyman1 said:
I've had the same problem. What was suggested by locking the screen from the Start menu did fix the problem. This has happened a couple of times since installing the 1.48 rom.
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
Click to expand...
Click to collapse
I had the same issue and installing net3.5 or bsb did not fix it. I too pushed start then the soft key "lock" (in lower left corner of screen) and both my email and lock issue was fixed. BUT it came back two times today, I think it had to do when I installed a new program, not every time, but I fixed it the same way. This has to be a bug.
greatcapp said:
You need to press & hold now. Before, you needed only to press it.
Click to expand...
Click to collapse
Yes this is an additional option. You can still press end button slightly ( or just lightly tap it ) and the screen will lock ( you will see the default "slide" on top ). This no need any tweak and is a default feature in the 1.48 rom
mobile88 said:
Yes this is an additional option. You can still press end button slightly ( or just lightly tap it ) and the screen will lock ( you will see the default "slide" on top ). This no need any tweak and is a default feature in the 1.48 rom
Click to expand...
Click to collapse
And, as I answered before. This isn't working for me.
I have to hold the end button, then select "Lock screen".
Before the upgrade in ROM, I could just tap the end button - now that no longer works. I have to hold it, then select "Lock Screen".
greatcapp said:
And, as I answered before. This isn't working for me.
I have to hold the end button, then select "Lock screen".
Before the upgrade in ROM, I could just tap the end button - now that no longer works. I have to hold it, then select "Lock Screen".
Click to expand...
Click to collapse
I think he means that when you press the end button the screen turns off. I know it's not actually locking the device, but the screen is off.
From my experience, the start menu lock resets something and allows the lock screen to work. This will work until the phone is restarted, which is when the problem is caused.
To fix this problem and get back the auto lock option....do the following:
with any registry editing software:
HKEY_CURRENT_USER
Control Panel
Keybd
DefaultKeyLock --------> change value to 1
johncmolyneux said:
I think he means that when you press the end button the screen turns off. I know it's not actually locking the device, but the screen is off.
From my experience, the start menu lock resets something and allows the lock screen to work. This will work until the phone is restarted, which is when the problem is caused.
Click to expand...
Click to collapse
Ok, sadly, the start, then lock workround isn't working for me. Just pressing the end key, turns off the screen, but doesn't lock it any longer. I'm trying to figure out how to get the .dll into the windows folder (as advised from the other thread). But I can't seem to do it. I can move the .dll file onto the handset, but then can't see it to move it to the windows folder. And I can't put it directly into the windows folder on the handset, as I can't see it from my desktop.
Activating "Auto Lock" from within BsB Tweaks seems to have sorted the issue for me
Usually when a call comes and the phone is inside the pouch (good for protection), there are several ways of messing up by accepting or rejecting the call even b4 its completely out of the pouch as blelow:
On screen:
1) U can press the on screen message but which will send an auto sms to the caller and end the call
2) U can press the answer key
3) U can press the ignore key
Off screen (hardware)
4) U press the answer key
5) U can press the end key
Incredibly, all 5 options are simultaneously active. The screen can be locked by S2U2 etc. but I cannot find any option of locking the hardware keys.
Any help will be appreciated
Firstly thanks for Omnia i8000 support on XDA..
Now I feel secure..
Secondly even I'll lyk to disable my hardware keys for call ans/end..
is there a registry tweak or something we can do to disable it..
s2u2 has that option... go settings/phone and u have S2A Hard ans/end key...
Search 542482 - there's an app for that over in the Mobile Apps & Games forum
Solution found!!!!
The issue was really troubling me and I finally found a solution. Install a small program called Incall lock which locks the call & end key. But that will totally disable u from accepting calls under WM6.1. So install s2u2 and enable screen response and voila!! U have. Both these are available elsewhere in this lovely forum.
Note:- The whole process during inplementation is quite messy as u will first have to install .net compact & samsung SDK software (both freely available).
4 software to do a simple thing which should have been taken care of by the OS. That's life under our billy, the goat.
Hope this help. I would be glad to give something back to this site, i have greatly benefited from.
TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).
ad720 said:
TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).
Click to expand...
Click to collapse
I tried tpro but it did not work for me. I am using wm6.1 under samsung touchwiz. Cud it b because of that ?
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.
bimboybimboy said:
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.
Click to expand...
Click to collapse
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps
captkkk said:
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps
Click to expand...
Click to collapse
Well, as I said I hv 6.1 & 6.5 not yet available in my country. so...
Hi,
I installed Throttle Lock.. Nice lock... it has slide to answer..
secondly it does not interfere with the touch player, lyk s2u2 does..
Are you using Omnia II with WM6.1 ?
Because throttle lock is not saving the settings on my phone. And yes, I am clicking the "ok" button at the top right and getting a message "changes saved". And my slide to answer is ON but no slide is displayed. All I can see is the default lock screen which opens when I click on a button on screen but that certainly does not solve my problem. Using ver .07 (latest).
I have even registered myself. Hell, the config.xml file shows Calllock is on but its not even locking when the call comes. That should be the very basic default function. Sorry, back to s2u2.
I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..
Aafi-rocks said:
I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..
Click to expand...
Click to collapse
Thanks. I unistalled S2u2 and installed again. Still no. Yet the program was working when I clicked on it. So, luckily having some working knowledge of windows, I found that the program is not putting a link in the start menu or start up folder. This I had to do manually. But thats unclean.
And what happens when a call comes is funny. There is a brief fight between the throttle default , the windows splash & the lock screen itself. Luckily, the lock screen is winning every time. But again unclean or is it the links I have placed.
Currenly, I have links to both thottlelock & throttlelockdemon in the startup & lockdemon in the start menu. How is it with u?
Also in the setting under samsung default setup, the options like lock mode & incoming are white on white. What are your current settings ?
Think this program was designed for HTC. But is definitly smaller and though not neat...working. Thanks
I have mapped it to a hardware key, so when I want to lock I press the hardware key..
Aafi-rocks said:
I have mapped it to a hardware key, so when I want to lock I press the hardware key..
Click to expand...
Click to collapse
Use incall lock for locking the keys when call comes. Works perfectly.
Tried the throttlelock for 2 days. Sometimes, the default wm screen was coming up and the look is messy. So more experiements......but till date s2u2+incall lock looks the cleanest. Will keep looking...
captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!
maardiweb said:
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!
Click to expand...
Click to collapse
I hv omnia 2 with wm6.1. Tried touchlockpro and was absolutely useless. How is it possible ?
Can u plz put in the download link.. Iam sure its somewhere on XDA itself, but I am kinda lazy to search today.... I'll download it once I reach home..