Related
I just got back from Dubai this morning, and I recieved my first call from the plane. Fine, it worked.... but then...
disaster struck!
The phone has the "no signal" message when I click on the reception icon. I've tried to click the "turn phone off" button but nothing works...
I can't get into the phone settings in the start menu to change networks...
I'm trying to back-up to SD to do a hard reset, but the phone re-boots itself every 4 minutes! The device is also very slow in responding to the commands. E.G. when I place my phone code it takes 3 seconds just to type in the number... strange! I have 48 / 64 MB free in memory and a 256 MB SD card...
I can't connect to activesync because the decive is not being recognized. So I can't transfer anything through the USB... it's gotta be some kind of manual un-locking from the phone itself...
I took out the sim card and am using a crappy nokia until I get this deal fixed.
I searched the forum for possible solutions and some came close, but none popped the cherry...
Have any of you experienced this specific situation? Is there anything I can do to recover my data before hard-reseting the Qtek? I made about 30 new contacts on the recent trip and was going to sync when I got home from the airport... but the 1010 keeps passing out on me!! It's like giving a date a full bottle of Crystal Champange before hitting the bedroom... Sucks!
All my appoinments are on the phone for tomorrow.. it's 2:11AM if anyone can get back soon with instructions or any previous posting, please let me know.. E-mail me... SOMEBODY SAVE MY SOUL!!
HELP!
sorry to hear about ur problem, must be awful
I dunno if any one can save ur soul, but if worst comes to worst, Ill buy ur soul off of u, just gimmie a good price
thanx, an good luck
Does the phone reboot even if plugged into the power? Also have you tried a soft reset with the sd card removed?
try also to remove the SIM or try another one. some of them are faulty.
I had a similar but less traumactic problem in the phone part wouldn't work at all. Turned out that error messages can be saved on the sim card and block functions. Removing and re inserting the sim is enough to clear the block in my case.
Good luck.
I had a similar but less traumactic problem in the phone part wouldn't work at all. Turned out that error messages can be saved on the sim card and block functions. Removing and re inserting the sim is enough to clear the block in my case.
Good luck.
Hi All
Have searched to see if this has been covered before ! but a bit of help for a newbie please
Is it possible to remove & replace the sim card without the unit losing all data etc ??
Only had the XDA11 for a couple of weeks,,all set up ok ?? with tom-tom etc, The other day had to remove the sim card for the day, so disconnected the battery for under 30 sec's, to remove the card, and replaced later that day, also within 30 sec etc, on powering up again,
all data was lost and the unit started to reload as a new unit again, is this correct,
Hope this makes sense
Best Regards TJ
I have a number of devices that I swap sims with regularly and have no problems as you describe.
Changing the SIM shouldn't cause it to hard reset only soft reset.
I have had a device that had the main battery flat but still kept its settings over a weekend on the backup battery.
Have you checked the level of the backup battery in the Power screen to see if there is any charge in it?
Thanks tyfy
Yep checked the batt levels before taking the card out, about 80% and 100 on backup etc,, but as you say, it did a hard start
Regards TJ
I can confirm the hard reset thing when I swapped SIM cards. Annoying at the time, but provided an impulse to update to 'latest' ROM. Haven't removed the SIM since, for fear of the same thing happening. If I could ever get home PC, work PC and home iMac properly synched and backed up, I'd remove it again to see what happens. Occured to me at the time that T-Mobile might have been up to some software tricks, then the paranoia left as suddenly as it arrived
Thanks Guys
I need to remove the sim card, so to fit the inbuilt carphone, O2 do not do 2 cards on the same number as yet !!
So !! is it possible to swap them around without having to do a hard start every time ??
Regards TJ
http://forum.xda-developers.com/viewtopic.php?t=10673&highlight=twin+sim
Hi cruisin-thru
Thanks for the link, not quite what i am looking for,
I need 2 cards ?? with the same number, or a way of moving the card from the XDA to the car and back again without doing a hard start every time ???
Regards TJ
Did a full back up to my SD last night, then checked the battery levels, = all OK, pull the battery and SIM, counted to 42 reinserted the SIM, battery and catch for battery, and everything normal. ALL data intact.
If you have a sim that is a few years old it is possible to clone it, the modern sims however will not work as the protection has yet to be cracked, if you do search on sim clone in google you will get lots of info. If you do manage to clone your sim make sure that only one phone is switched at at any one time or you may find that the security system on your network will zap the sim if it sees 2 identical numbers logged on.
Hi Guys
Thanks for the help,, been away over the weekend,
Took the card out Fri night, (took less the 20 secs) to put into the car system,,,,guess what, another hard start,, now sat here reloading all the stuff again (ie Tomtom ) etc
Had about 80% batt power with 100% backup,, i must be doing something wrong somewhere, can not belive this happens every time the card is removed !!
Regards TJ
Are you turning the PHONE off as well as the PDA? ie: set to flight mode before you turn it off. Maybe that's the problem?
Hi All
I think GaZ,s suggestion might have cracked it !!
Remove the tom tom chip, did a back up to storage card, and put the phone into flight mode, then removed the sim card within about 15 secs,
all OK !!,, have tried a couple of time and so far all ok
Many thanks to you all for the help, appreciated
Regards Tim
I have a qtek 9000 and an xda exec. Both have the same rom updates (latest o2). The qtek works as it should, but the o2 does not. I have re-flashed the rom twice. No software is installed, nor is bluetooth running. The phone works and connects to 3g etc. If I close the clamshell, about 1 hour later the phone is asleep and will not wake up. A reset must be done in order to turn it on. I have hard reset many times and cannot fix this problem No calls or messages have been received by the phone. The green phone light remains flashing in its deep sleep mode, but it is not possible to call the phone. It does not ring or wake up. Has anyone had this problem? I have searched this forum and read many posts concerning sms causing sleep problems etc., but can find nothing relating specifically to my problem. Thanks for any help.
sounds like it could be faulty.
never woken it up via a phone call, so I don't know about that, as I don't use it as a phone yet, waiting until the contract for the W800i ends at the end of this month before I start informing people of my new number. But I wake mine up via the power button. If that fails for you, then I would suggest speaking to the company you got it from, as it would suggest a fault.
same problem here
r1.04.10
G42.37.P8
D1.13.64WWE
imate jasjar with qtek 9000 rom
verry annoying
Kaze, this problem is usually caused by having anything running on the Today screen or resident in memory that is installed on the Today screen. For instance, a application loader on the today screen with links to programs on the SD card can cause this type of freeze, as it tries to get the icons from the SD card but cant - crashing(?) WM5. Just keep anything related to the today screen or bootup etc on the phone's memory itself and your crashes should go away.
dont think so
http://forum.xda-developers.com/viewtopic.php?p=223711#223711
That other thread you are posting in is back from October/November last year. Just taking out the SD card wont help, you need to disable the programs trying to access the SD card. Although your problem might be different - maybe somethings faulty with your SIM card then? Try a different SIM card and see if it still happens.
As I said in my initial post, there was nothing installed on the unit. There was no sd card, and it was in total factory default condition. The unit was returned as it was faulty. The new unit works as it should, with the same sim card etc.
As I said in my initial post, there was nothing installed on the unit. There was no sd card, and it was in total factory default condition. The unit was returned as it was faulty. The new unit works as it should, with the same sim card etc.
I've had a new Qtek 9000 for about 3 weeks and it has had exactly this problem from day 1.
Looking at this thread http://forum.xda-developers.com/viewtopic.php?t=32688 I thought it might be a SIM problem but it isn't. Done a load of tests and the final one - hard reset - no SIM - no SD card and the problem still occurs. It's on it's way back for repair / replacement.
Same problem here? Does anyone have the solution yet?
I'm sorry no - mine had to be sent back for reapir.
It's fine now.
First one I got had this problem from day one fresh from the box with nothing installed. I simply took it back to the shop and had them replace it as faulty. Second one has never shown this behaviour.
Dodgy batch/ component.
My advice is don't wait for a fix, it's a hardware fault, return it under warranty.
i cant make calls or send any texts, basically no communication what so ever, when i call my number from another phone while the phone is inside the mda compact II it just doesnt go through...
anyone know why it may be? i got a feeling its 'blocked' (not locked, so doesnt need unlocking for other sims)...
looking forward to hear from you...
tia
Do you get any form of 'reception' (bars on your phone)?
I have the same problem too. In your case, you just need to reflash the RADIO ROM on your phone.
Just as Nokia said, check the reception signal. Your antenna may be busted. Also, does the phone as you for the PIN code when you reboot it? Your sim card may not be properly connected to the mainboard.
I've checked the connection on my antennae, to find that it was indeed connected. I can access the contents of my SIM card with ease. Any suggestions?
do a hard rest n c wt happns...
You haven't answered me about the PIN code after soft reset. Does it go through when you type the PIN or maybe it doesn't even ask for it?
What happens to me now, appears to be fimware related. My phone will work after a hard reset, but then the radio quits working when I the extended ROM customisation kicks in, and reboots the unit. I've tried many ROMs with no success.
You can cancel the customization process by simply pressing the soft reset the second after it starts customizing.
or you have a phone that was
A: STOLEN
B:Switched off by the carrier, So therefore blocked
C:You have a device that Is waving a sign saying sell me abroad ,sell me abroad,sell me abroad
Vlodeck, I've cancelled the customization using a soft-reset (with no success).
I've definately purchased the phone myself about 2 years ago (its also past the warranty period). I contacted my cellular provider, they claim that the imei number I have isn't on the 'blocked' list either.
Go to Prophet forums and find yourself a radio rom. Flash it to your charmer and see if it worked. As far as I recall the one working best with charmer was 2.69.
Vlodeck. I've tried this.
What now seems to work for me, is flashing my unit, using Taxist's "Big Storage" ROM. The problem now, is the radio stops working again, when I install any application that makes registry changes (then does a reboot).
What Taxist's "Big Storage" ROM? Which device do you have anyways? You sure it's not Qtek S110?
Its found on this page: http://forum.xda-developers.com/showthread.php?t=297080&page=3
I have both a Charmer, and Magicain P10A. They both seem to be having slightly similar problems (Note: I'm not confusing the ROM images when I'm flashing though).
The concept behind the "Big Storage" is eliminating the extended ROM from the flashing process (therefore you get more storage space) (that would be wasted with useless customization data) (giving you a ~20MB increase in storage space).
Nokia 3650 said:
The concept behind the "Big Storage" is eliminating the extended ROM from the flashing process (therefore you get more storage space) (that would be wasted with useless customization data) (giving you a ~20MB increase in storage space).
Click to expand...
Click to collapse
I know what Big Storage ROMs are I was just amazed due to the fact the there never was a Big Storage ROM for charmer. That's why.
I tried creating my own (for the Charmer), but the file never seems to be written on the SD card. Why is this?
NB: The write protect tab isn't on, and the card is properly formatted.
Hello guys, I am having a problem with my unbranded x10i bought in UK (I am currently using it here in the philippines with a local sim card) . After I did an OTA two days ago, it just keeps on restarting/booting! I have tried the "repair" option twice in the PC Companion software but still no luck.
What's strange though is that when I tried switching the phone on WITHOUT a sim card in, it booted up with no problem (and I checked the build number, it says R2BA020 which probably means the OTA update was a success). I put the sim card back in and the problem came back, it kept on restarting.
What seems to be wrong? Any suggestions on fixing it? I would really appreciate your help guys. Thanks!
Update: I successfully rooted my phone hoping that rooting would solve my issue, but unfortunately it still keeps on rebooting/restarting whenever i put ANY sim card in.
Have you tried using another SIM-card?
yes. I have used different sim cards...
Try flashing back the original firmware.. and make sure the sim card is inside the x10 while doing it. Worth a try..
I have the same problem too and I have just updated my phone to R2BA024 and the firmware version is still 1.6. I have hard-reset so many times and reinstall some many times. The problem still there. I have contact Sony Ericsson customer service and bought my phone to fix. Got it back, problem hasnt been solved. I have waited for 3 weeks for a reply from them and end-up they said they do not have any new phone or spare-parts to fix my phone. Until then, I have contacted them almost 10 times and still no one has the right answer and just keep asking me to wait. They dun even have an exact date when the parts will arrive. I am very piss off now and I dunno what I should do next.
Its the same problem here with me too. Bought the phone from a friend about 3 days ago. was going all good when it just started to keep booting itself. While the sim is inside, it'll restart just as it finishes booting. Without the sim, its fine. I have tried other sim cards too, and format/reset my phone many times but it just isnt working for me anymore. HELPPPP!!!
cvg_guy said:
Hello guys, I am having a problem with my unbranded x10i bought in UK (I am currently using it here in the philippines with a local sim card) . After I did an OTA two days ago, it just keeps on restarting/booting! I have tried the "repair" option twice in the PC Companion software but still no luck.
What's strange though is that when I tried switching the phone on WITHOUT a sim card in, it booted up with no problem (and I checked the build number, it says R2BA020 which probably means the OTA update was a success). I put the sim card back in and the problem came back, it kept on restarting.
What seems to be wrong? Any suggestions on fixing it? I would really appreciate your help guys. Thanks!
Update: I successfully rooted my phone hoping that rooting would solve my issue, but unfortunately it still keeps on rebooting/restarting whenever i put ANY sim card in.
Click to expand...
Click to collapse
Is it 32K sim or 64K???
hi techguru, can u tel me wot the diff is between the 32k and 64k sim ? many thanks
ISSUE SOLVED here.
BTW : my sim is 64k.
anyways, i found out that the problem was because of the faulty battery. what i guess is that the voltage couldnt get to the requirements of the phone, and everytime the sim radio (whatever its called) switched on, the phone just turned off.
I reinstalled/repaired my phone many times, GOT the exclamation mark of death one time also, but the phone just didnt turn on.
Later i noticed that the phone would just turn on itself when i attach the phone to the charger, otherwise it wouldnt turn ON. So what i did was just change the battery, and walla, the phone is ALIVE again.
Sim is working, phone is working.
BUT i see some signal losses from time to time, otherwise the phone is good enuff.
FOR me , the change of battery did the trick, I hope it works for u guyz aswell.
Cheers ...
Shonan_ said:
hi techguru, can u tel me wot the diff is between the 32k and 64k sim ? many thanks
Click to expand...
Click to collapse
64k sims draws more power than normal ones.
Sent from my X10i using XDA App
Cheers fella this mite be worth me lookin in to
Sent from my X10i using XDA App
addictivesundew said:
ISSUE SOLVED here.
BTW : my sim is 64k.
anyways, i found out that the problem was because of the faulty battery. what i guess is that the voltage couldnt get to the requirements of the phone, and everytime the sim radio (whatever its called) switched on, the phone just turned off.
I reinstalled/repaired my phone many times, GOT the exclamation mark of death one time also, but the phone just didnt turn on.
Later i noticed that the phone would just turn on itself when i attach the phone to the charger, otherwise it wouldnt turn ON. So what i did was just change the battery, and walla, the phone is ALIVE again.
Sim is working, phone is working.
BUT i see some signal losses from time to time, otherwise the phone is good enuff.
FOR me , the change of battery did the trick, I hope it works for u guyz aswell.
Cheers ...
Click to expand...
Click to collapse
This also mite be worth a look too
Sent from my X10i using XDA App
hmmm. sounds interesting. I might try changing my battery. btw, i have tried using both 64 and 32K sim cards but the phone keeps restarting with any of the sim cards in. without both the sim cards, the phone works fine. how much does an x10 battery cost?
here, i get the cheap chinese battery. it isnt expensive, but its working great. almost better than my previous battery.
cost me around 2.5$.
but.. i am still getting lots of SIGNAL DROPS. i dont know why it is happeneing. I tried swapping the battery with the original battery of another X10, but no change. Signal loss is not a battery issue then.
Any idea what it could be ??
Signal loss?
Maybe a weak signal, or radio related?
or maybe its because i updates it to R026 is causing the signal loss issue ??
@techguru
I am also using airtel, but with a 64kb sim.
In my case it does not start.
It start if with no battery or with a 128kb sim of TIM.
I tried to recharge the firmware but nothing seemed to change.
I know that someone solved the problem swithcing off the phone in airplane mode, but this is not the case for me.
I also noticed that in some cases the led is green and is slowly blinking.
I am ready to change the battery if this helps, but I am not sure. Even if I put it under charge it does not switch on and the battery seems not to charge
As I bought the phone only since one day I wonder if they will change it.