Qtek s110 MorphGear, PocketNester, etc problems - JAM, MDA Compact, S100 General

1) I can use only 4 joystick positions(left, right, up, down), but early, with asus a620, i also used other (left-up, right-up, left-down, right-down)
All those, who have s110 have same problem?
2) With Emulators I cannot bind button "red phone"
3) With Haali Reader coldn't working left volume-slider, cannot bind for text-scrolling...
PS Qtek s110
PSS
ROM 1.12.00 WWE
ExtROM 1.12.20 WWE
RADIO 1.12.00
PSSS Sorry for terrible Fren... English :?

1. i am pretty sure this is impossible... read the manual to get a confirmation for this.
2/3. switch off all Taskmanager (i.e. SPB P+, WisbarAdvance(Desktop) and so on). Then assign buttons...

Related

Is there any Simplified Chinese ROM above 1.06.07?

Long time it has not been updated...
I am also looking for it, because 1.06 only get white ccreen on my Qtek S100
I am also looking for it, because 1.06 only get white ccreen on my Qtek S100

Could you guys please comment about my problem?

Hi All,
I seem to be having Bluetooth problems with my dutch t-mobile mda compact:
I am using a simple bluetooth headset - it's got no brand name - but I know it works fine beacuse before getting the mda compact I have used it with my Nokia 6310i and it works fine.
Anyhow, I pair the headset with my mda with no problem and it may work all day long without any problem - but... if for instance I leave the room with my headset - leaving the phone behind - which essentially disconnects the BT headset and the phone - when I come back the phone doesn't recognize the headset no matter what I do. The headset icon on the top of the phone disappears and oesn't come back. I reset the phone, I cliick on the headset answer button, I turn on and off the bluetooth on the phone, I switch on and off the headset - nothing helps!
The only solution that I found working is to delete the headset from the bluetooth devices in the mda and then rediscover the headset which works like a charm. All goes back to normal unitl the next time that it loses connection. I think the phone also sometimes loses connection when I am not using the headset for a long time (and hour or so)...
What can I do?? this is really driving me crazy. I have no problems when using the same headset with my nokia 6310i - but hey, I want to use the MDA!!!
My device: MDA COMPACT - T-Mobile Netherlands
Rom - 1.01.00 WWE
Radio - 1.00.10
Protocol - 1337.36
Ext Rom - 1.01.124 WWE
Thanks you guys for helping me
Ciao,
Lisa
hey Lisa..
i've noticed ur device informations are the following:
My device: MDA COMPACT - T-Mobile Netherlands
Rom - 1.01.00 WWE
Radio - 1.00.10
Protocol - 1337.36
Ext Rom - 1.01.124 WWE
they are too old :wink:
I have not experienced a problem like urs before,but i recommend u to upgrade ur device(the latest ROM version is 1.12.00,as much as i know :wink: ),u can find it in the ftp server,wich u can access from the wiki page(top left of ur page)...
if ur new to PDAs,then u have to know that ur device is a Magician,so search the ftp in the Magician folder :wink:
if u don't know how to upgrade ur device,u just have to ask,i will guide ur to the steps with pleasure
hope i've helped...
RAGO :lol:
Thanks Rago.
I was kind of wondering which one of the ROMs I should pick? When logging on to the FTP directory - there are lot's of shipped Magician Roms... Many show 112 - but which one should I take?
Is there any issue with the new Roms? Bluetooth problems?
Regards,
Lisa
hi lisa
best available workaround is to buy zenduris pocket zenphone software (do a search here at xda-developers). this program enables the headset profile permanently so your mda will be able to re-connect with your headset again, when you are back in the room.
cheers, lutz
Hi Lutz,
Thanks again for helping me
So you are using the word "workaround" - is this a known problem or it this just a problem with my device?
Am I to assume that there is a problem with the BT can can only be worked around and not solved permanently?
Does any of the new Roms solve this?
Bye,
Lisa
hi lisa
well there may be a rom that acts different but i won't force you to flash your device certain times with all the risks just to find out that it doesn't work! zenduris pocket zenphone really fixes the issue permanently and is definitely the best way to do it. i myself use the german o2 xda mini rom and it works well with my parrot ck3100 and reconnects with it the way it should while all the other (german) rom versions did not. but i guess you won't flash your device with a german rom, right...
cheers, lutz

Problem with T-mobile MDA Compact and Parrot CK3000

I have recently purchased a Parrot CK3000 and a new MDA compact on T-Mobile.
At first all was fine, but after a couple of days, when you get into the car, the MDA would pair up with the Parrot but then take over the car kit as though a call is in progress. The stereo displays CALL and the music is muted. The only way to reset it is to turn the carkit off and back on again as well as the MDA.
I have hard reset the phone and the problem comes back after a coupld of pair ups.
Does anyone else have this problem, or know of a fix.
I have tested the carkit with a Nokia 6310 and it is fine, so I'm sure the problem is with the MDA compact.
I have :
Rom version 1.12.00 WWE
ROM date : 05/28/05
Radio version : 1.12.00
Protocol : 1337.42
ExtROM: 1.12.152 WWE
I noticed that Radio version 1.13.00 is out, but does this have anything to do with Bluetooth.
Parrot and T-Mobile tech support have had no luck fixing the problem.
Any help greatfully received ?
Thanks
Richard
Hi,
I have excactly the same configuration as you. I have ROM 1.12.01! Which Firmwareversion is your CK3000?
I have 1.13. The only problem with this version is a short heavy noise if i make a call. If your problem still exist after firmwareupgrade of your mda,
try to reset your CK3000 (press green and red button for few seconds)
and pair again.
Regards Yoshi
Thanks, I've just upgraded the MDA compact to Rom V1.13.00 WWE and radio 1.13.
I'll let you know if it fixes it.

False Boot Modus

Hi! I have got a problem.
I bought a used MDA because mine broke. But the hardware inside looks different. For example the reset Button is on the left side of the mini-usb and there is no battery under the Speaker. But that does not matter for me.
The Problem i have is that the phone turns in a different Boot-Mode after pressing Power+Camera+Reset. The Boot-Mode i was used on my old MDA looked like a black screen with SERIAL written on it and % of updating.
The new Boot-Modus-Screen looks like red-green-blue stripes and its written IPL 1.12 SPL 1.12
Please tell me what kind of MDA i have and how i can turn it into Boot-Mode to flash it.
Thanks for the Help, Georg ([email protected])
System-Infos:
ROM-Version: 1.12.2.21 GER
ROM-Date: 11/14/05
Funkempfangversion: 01.12.20
Protokoll-Version: 4.0.13.23
ExtROM-Version: 1.12.02.109
Hardware:
CPU: OMAP850
Speed: 195 MHz
RAM-Size: 64MB
Flash-Size: 128MB
Flash-Chip-Type: M-Systems G3
Data-Bus: 16 bits
Model-ID:
Model: PM200
Based on the hardware you mentioned (eg OMAP850 195MHz, reset button position), the MDA you are having is a MDA Compact 2 (Charmer), and NOT a MDA Compact (Magician). To double check, see if the phone is running WM5. If it is running WM5, it is a Charmer, Magician cannot run WM5.
The 3 colour screen is the bootloader mode. Study the Wiki on Charmer and the Charmer forum before you do anything to it. The Charmer and Magician is a TOTALLY DIFFERENT phone, although they look very similar.
Thx for that Info Hanmin! And of course you are absolute right! I got a MDA Compact II ! Just tell me if i should be happy about it or not?
Well i am happy, because i broke my old MDA half a year ago and bought the MDA c II (with broken screen) for € 20,- on a 2nd hand market. I took the still working screen from my old MDA and mounted it on the new MDA II.
So i got a working device for little price, but i am not sure if i like it more than my old MDA...
Google the advantage of WM5 over WM2003, you will see the advantage of your new phone.
However, you may find some apps run slightly slower on your new phone though. There are pros and cons, but generally, it is a good news. Further, I think your phone is less than 2 years old, so chances that it will break again is minimal. I think.

new to pda2 imate

dear all,
i am new to htc machines and pdas. i bought a used alpine (imate pda2) recently. it has an arabic enabled wm3 se
rom version: 1.111.00 wwe
rom date: 01/27/05
radio version: 1.03.00
protocol version 1337.42
ext rom version: 1.11.153
i have the folowing querries:
1. would changing the rom to wwe, non arabic, speed up the machine?
2. is a newer version of the rom available?
3. how do i install a backup os, like linnux on this machine?
4. should i stick to wm3 se, or is wm5 a better os? if so, will it work on this amchine and where can i get it?
5. after a long pause, say overnight, the machine takes a good about a minute to boot up, is that normal?
6. specs of the pda say that the battery has a standby time of 172 hrs, whereas the pda shows 182 min of time, adjusted, why the discrepancy?
7. lastly, the call duration shown on the machine is 28 min calls received, and 165433 min call outs. what is that?
if can get answers to these questions i will be grateful.
junaid
PDA2 Upgrade
i have da same system
PDA2
& i want to update it
1. maybe a bit as i believe that the arabic is a 3th party software running ontop of wm it use mem it would also use a bit of cpu power
if it would matter much i dont know
2 http://wiki.xda-developers.com/index.php?pagename=HTC_Alpine_ShippedOrg
3 http://wiki.xda-developers.com/index.php?pagename=Xanadux
4. no wm5 out for alpine
5. sounds like it had a hardreset
6. batt time is by no means a exact science nor is measuring it
or displaying it
7 sounds like a bug i would use search for "clear AND calllog" or something to see if there is a way to clear it

Categories

Resources