I think i have a faulty unit because i can not connect to the internet at all (although it worked last sat morning when i got the unit but i did not try again until my number got ported)i have tried it on GSM only and checked all the settings over with the guy from T-Mobile and they are ok but if i put my sim in my Jam i get a connection with no problems.
The guy from T-Mobile says it may be beacuse i am on the fringe for UMTS reception but i get the U symbol and 4 bars on the strength meter but surely it should go on to GPRS if it can not get reception on UMTS as it would do for phone calls anyone any ideas ?
Start>Settings>Personal Tab>Phone>Band>"Select Network Type" and change to GSM (it's probably on Auto), then ok it all.
If you now connect over GPRS (which is what the above is to do - force it not to use UMTS at all), then you're ok.
Next thing is to go to a UMTS strong area, and do the settings but set back to Auto and see if u get 3G connection.
Hope it helps.
i just get the message ''warning:unable to change GSM/UMTS Band, please try again later''
thanks anyway
Related
Hi everyone,
It's my first post here - most likely not to be my last. Oh, and i know i spelt HSDPA wrong in the title!
I very very recently (yesterday in fact) managed to get hold of my T-Mobile Hermes (one of the .37 batch) and am having no problems whatsoever with the phone, the only problem i am having is getting any web download speeds faster than around 40kbps?
I phoned T-Mobile yesterday and after being on hold twice and explaining myself many times i think i got HSDPA enabled as the lady (who was very nice) said she promises it has been enabled for me. I tried half hour later and sure enough, i used www.dslreports.com/mspeed and could now download at around 800kbps - perfect! Unfortunately i tried again this morning and it says 40kbps again
Is there any way to tell whether HSDPA has been enabled on my phone before i call T-Mobile again? Does HSDPA just run over 3G? I haven't got a brilliant signal where i am - usually 1 or 2 bars, could this be what is affecting my download speed? I need some help!
Just realised i have spelt HSDPA wrong in the thread title - never mind! Can anyone help?
Have you read this dude?
http://forum.xda-developers.com/showthread.php?t=276154&page=5
Theres a couple of files you can check you have i believe, also the Fit4cat program is worth downloading.
40kbps is GPRS data speed. Even without HSDPA you should get 300kbps on UMTS.
Your phone will show a U or a G depending on which network you are on.
It shows a "G" all the time in a little white block next to the signal bar, and sometimes the signal bar shows an antenna and sometimes a "G" also - does that mean when im on the "G" ill be on HSDPA and when im on the antenna (if i cant get 3G) ill be on GPRS 40kbps?
If so that makes a lot of sense as the signal is not brilliant round here, i went shopping in a much bigger town this afternoon and tested again -> full signal and downloading at around 1200kbps! Obviously it is enabled, think its just down to my signal....
Does that sound about right?
RTFM, the G is for GSM ie data will be GPRS.
You will either have a 3G or U depending on what ROM you're running for 3G/UMTS/HSDPA .
I'll be honest i only got half way through the quick start guide before i started playing with it. So, if my phone is always on "G" i'll assume i need to try and unlock it using the fit4cat thing? As T-Mobile have said they have enabled HSDPA on my account?
How did i get 1200kbps on GPRS by the way? It definately said "G" when i was connected and did the speed test...?!
I just ran the fit4cat Hermes tweaker and still no luck, it only connects to "G" rather than "3G", 3G is apparently available in this area so why does it only connect to G? Im confused and would really appreciate some advice...
Well if you probably didn't notice the U (or whatever) when you got 1mbps once it. This means that HSDPA is enabled on your phone and SIM.
The fit4cat tweaker only (dis)enables HSDPA but that isn't an issue because even without HSDPA you would be getting UMTS speeds.
One thing you could try is. Go to Start->Settings->Phone->Band set GSM/UTMS to GSM900+1800 + UMTS2100
You could also try a manual search for networks from Start->Settings->Phone->Networks->Find Network
Finally you can also disable GSM totaly using network type in the band selection and see if you get a steady 3G signal.
Thanks for your suggestions, here are my findings:
kevino said:
Well if you probably didn't notice the U (or whatever) when you got 1mbps once it. This means that HSDPA is enabled on your phone and SIM.
Click to expand...
Click to collapse
Good point, i have a long drive home tonight so will check when going through built up areas to see if it connects to 3G or U then.
kevino said:
One thing you could try is. Go to Start->Settings->Phone->Band set GSM/UTMS to GSM900+1800 + UMTS2100
Click to expand...
Click to collapse
Tried this, and phone disconnected then reconnected but still said "G" when connecting to Internet. Set back to "Auto".
kevino said:
You could also try a manual search for networks from Start->Settings->Phone->Networks->Find Network
Click to expand...
Click to collapse
Did this also, it pops up with the message "Registering on the network" and disappears and thats it, nothing happens.
kevino said:
Finally you can also disable GSM totaly using network type in the band selection and see if you get a steady 3G signal.
Click to expand...
Click to collapse
I cannot find an option to disable GSM in the Band tab, i have the following:
Select your network type.
__Auto
__GSM
Select your GSM/UMTS band.
__GSM(900+1800)+UMTS(2100)
__GSM(1900+850)+UMTS(1900+850)
and thats about it. Cannot find anything that would let me not use GSM whatsoever? I appreciate your help so far
It may be the case that your reception for 3G just isnt adequate enough to work where you live, O2 states there is reception in the area where i live but i only tend to get UMTS upstairs....just one of those things....here at uni i get FULL UMTS reception anywhere.
richieboy said:
I cannot find an option to disable GSM in the Band tab, i have the following:
Select your network type.
__Auto
__GSM
Click to expand...
Click to collapse
In the dopod ROM it has a WCDMA option too. No big deal !
Seting the band was just so that the phone doesn't bother looking for bands that are not available in this country. To try and encourage it to check the correct UMTS band more quickly.
My suggestion to use find network (you need to select manual search) in Networks wasn't too helpful anyway as it doesn't list the band. So no use unless you can disable GSM.
Of course you may have got a spurious speed test result. How old is your SIM? It needs to be a USIM
Yes firstly is your SIM card a USIM....or is it a SIM card from an old handset?? I think youve already said you have had the 'U' appear on your TyTN at some point.....so again im going with the assumption you just dont have adequate UMTS reception for it to work....hence why you are only seeing 'G'.
So, funny story...
It seems where i was over the weekend (girlfriends) is borderline, so as mentioned aboved i can get 3G upstairs but not downstairs - i decided to drive around and got 3G all over the place...the best news is i get 2/3 bars of 3G at home too!
Problem solved, im an idiot - but hey, it doesn't hurt to ask right?
680kbps! Woo
richieboy said:
So, funny story...
It seems where i was over the weekend (girlfriends) is borderline, so as mentioned aboved i can get 3G upstairs but not downstairs - i decided to drive around and got 3G all over the place...the best news is i get 2/3 bars of 3G at home too!
Problem solved, im an idiot - but hey, it doesn't hurt to ask right?
680kbps! Woo
Click to expand...
Click to collapse
girlfrends! Woo
Hey guys, My device is Kaiser(TyTNII) and AT&T is my operator.
I live in Philadelphia, US.
Before yesterday my TyTNII can access HSDPA (with "H" symbol on the top right) when I try to use internet.
However, I use Kaiser Tweak to change some setting of my device and suddenly my kaiser doesn't recognize HSDPA network anymore, I mean it will only show "3G" on the top right. I have checked all the settings and everything seems fine.
HSDPA function is checked and same as in the Kaiser Tweak.
Can someone help me out here?
Thanks.
i have the same problem, cant go into hsdpa or even 3g only edge. and it seems to have happened after using kaiser tweak also.
Got some help over in the Kaiser forum that helped me. Go to your comm manager then settings/phone/ then go to band and switch your network type to wcdma. after it updated the network i switched back to auto and it seems to be working so far for me. hope this helps you out, something you could try.
I seem to have the same issue but the above solution doesn't help. Whenever I set the phone to do HSDPA through Connections I loss all data connectivity, once I turn it off HSDPA I get 3G.
Is it possible for radio settings to survive a hard rest / ROM upgrade or is the HSDPA side of my Tilt broken :-(
Any insight or help would be real appreciated.
Several times I have gotten "Warning: Unable to change GSM/UMTS Band, Please try again later."
JohnnyGTO said:
I seem to have the same issue but the above solution doesn't help. Whenever I set the phone to do HSDPA through Connections I loss all data connectivity, once I turn it off HSDPA I get 3G.
Is it possible for radio settings to survive a hard rest / ROM upgrade or is the HSDPA side of my Tilt broken :-(
Any insight or help would be real appreciated.
Several times I have gotten "Warning: Unable to change GSM/UMTS Band, Please try again later."
Click to expand...
Click to collapse
OK is it possible for this to be tower related? What I mean is I drove about 4 miles from my house, got a better signal and surfed the internet using HSDPA. Now I'm back home and HSDPA is chocking and giving me "unknown error 0x80072f78"
What He!!?
One note on my HSDPA trouble, it must some how be related to the one tower nearest my home. When I go anywhere outside a 5 miles radius (I live near the tower) everything works fine.
Here is the weird part, every where else the phone will switch from HSDPA to 3G to Edge and back no problem. Here in town it locks into HSDPA and refuses to switch to 3G or anything else. I don't know if it means anything but it seems to get an IP address I can ping but I don't get any DNS info!.
Now how can I convince AT&T that there's a problem when their support person denies there is any HSDPA services and I should only expect 3G?
hello,
after searching on "3G" in the forum, i seems that the problems are just the opposite to my question, they all want 3G to be turned off.
Now I want to connect to 3G (with the "G" icon on the staus bar).
My problem is that it always connect on "edge", with the "E" icon in status bar and when I want to make a video call, it always says that there is no connection to 3G so I can't make videocall.
Anyone knwos how to activate 3G?
I looked into the connections, but I don't want to mess in it without knowing what I do.
BTW I'm in Europe (Belgium).
Thanks
You fell into the same trap I did when I first got a Windows Mobile phone.
G means GPRS and is the lowest, simplest connection speed.
G = GPRS. "Normal" internet speed (9.6-14.4kbps)
E - Edge. "Enhanced" internet speed (normally 48kbps, but can be higher)
3G = 3G internet speed (128-384kbps). Also allows video calls.
H = HSDPA. "Mobile broadband" speed. (1.8Mbps, 3.6Mbps or 7.2Mbps depending on operator).
You'll want to go to:
Start > Settings > Connections > Advanced Network
Make sure that HSDPA/HSUPA is enabled
From then on, it depends on the signal in your area. If you find that you're having a problem getting and maintaining a 3G or H signal, you might need to get an updated SIM from your operator. I got a new SIM from O2-UK and it solved my connection problems immediately.
I see that HSDPA/HSUPA is enabled.
Could it have something to do with the settings in connections (instead of advanced network settings)?
I will also check with my provider (sim card)
Thanks for the reply
i cannot connect to the internet not using wifi. i do however h an H symbol next to my signal. i dont get why i have the hsdpa but cannot connect. i've tried anything i can think of.
*i can't turn data connection on in my comm manager, it automatically disconnects and says wap.cingular not working or gprs not working somthing like that.
*in the connection settings i pick media net wich is automatically picks att but still won't
*in settings/personal/phone i left if auto defualts for bands
*settings/connections/advance network i even tried to put it to hsda ONLY won't work
the only new lead im getting is this Zenith post saying he got new sim card so now it's working. that's all im getting at now. but im even skeptical about that
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
artesea said:
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
Click to expand...
Click to collapse
you wouldn't believe how i found out i had no internet. they say'd it was in the system but it was disabled in thier system. i put in my brothers sims and his work just fine. so i told them to look at whatever his plan is and they switch to what he had. anyways long story short i found out not my settings bc you just auto configure it connectin wizards, and wasn't sims card, it was stupid att. i was getting the H icon but not an H on my signal. anyways its all done now. thanks again guys
Today i flashed my HTC Touch HD with this rom (STONEHENDGE), Now for some reason i cannot get my 3 network to work atal.. Cannot make or recieve calls. It shows an exclimation mark next to the network signal icon. Also when i press find network in network selection it only finds o2 tmobile orange and vodaphone.
Any help? Is it maybe the radio needs updating?
Might sound obvious, but you have checked the UMTS band is 2100 (or Auto), and the phone has 3G enabled in comms manager?
If it's finding the 2G networks but not Three, sounds like phone is set to GSM only, sometimes happens ater a new ROM.
my phone cannot connect to a 3g networks .. first it find just 2 operators. its Called cellcom and Orange.
anyways the signal is 2g and it cause to my internet to barely work and at the top right of the device i can see a small G letter (from what ive heard it should be H+) i think its because of this 2g mode. when I disable the automatic mode it instantly searching and finding only 2g.
can someone help me with this problem is it because of the rom or what?