Hi I have Qtek 1010 PW10A2, rom is 3.17.03.
When update radio, so it type something error at 1% and press OK to restarting.
In boot it type GSM error.
Has somebody solution?
Thx
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
No garantuee, for many people it worked, for some it didn't worked....
Stefan
I wear off it tried according to procure legacy, but malfunctions it, always it stops on 1%.
:evil:
Can't it be HW trouble?
Maybe it's problem there that indicator battery power remaining: UNKNOWN.
What it shows normally?
ere
i want know"What it shows normally?"
Related
Hello there
I have Jam Piece here, while booting up it read
Code:
No GSM
D 1.11.00 WE
I try many time to Upgrade the Radia but it Stop at 0%
"Upgrading Radio Please Wait ..." 0%
also some time it read while booting UP
Code:
G None
R None
D 1.11.00 WE
I try also the Uniradia Rom and nothing goes successful ..
any Idea What is the Problem is !?
this i-Mate belongs to a friend of mine, So I dont know wither its a Software problem or not, but the Hardware inside seens to be untouched and Okay..
Thx
Hi,
I got the same NO GSM problem with my O2 XDA mini after I tried to flash the ROM. It failed the first time I tried to flash it, second time it completed, but now I have a NO GSM problem.
Did you manage to find a solution to your problem?
thanks!
Hello,
I have an unblocked SPV M560 (HTC3300).
Few weeks ago I have installed the B&B rom with WM6 on it. Now I would like to install the adinfinitum rom (http://www.adinfinitum.fr/wm6_gps_m6...d_and_the_ugly) to solve the GPS problem we can have with the M650 but I cannot flash anymore.
Here are some explanations:
After starting "start_uspl.exe" I get the Linux screen then the RUU application starts on my PC. RUU is trying to connect to the device but after few seconds it displays the error "ERROR[260]: Update error".
After this I tried to restart the pda, wait for Activesync connection and try to restart RUU.
This time RUU can connect, I can see the grey screen on the PDA and it starts updating... but after 2% I get a black screen on the PDA and RUU displays the error "ERROR[270] Update error".
I'm now reading this forum since 2 days and saw that other people already had this problem but I did not find any working solution.
Does anyone of you have an idea of what can I do to solve this problem?s
Thanks in advance for your help.
Alain.
REad this...
Remove sim and mem card from phone use clear storage to clean phone memory then again try start_uspl.exe wait to 100% finsh do not disconect phone and run then romupdateutility i hope that this can help mine problem is resolved and i flash spv m650 many times.
Hi, i have similary problem, when i try re-install WM on my xda orbit 3.15.118 i have alert : flashing error check your update utility..when i try install another WM6 i have alert : error 270:update error
battery full charged
anyone help me ;-)
Hi,
I finally managed to do the update. The only difference is that when RUU has started after getting the black screen I clicked on the cancel button.
After this I let the terminal with this black screen for few minutes (about 5 minutes) and starts again the RUU application.
And this time is works... don't ask my why, maybe it takes some time to the terminal to be ready to accept connections. At least now SPL 1.1 is installed and I can upgrade. My GPS is now working
Thanks
Alain
Spv m650 arte100
when i run the start_uspl.exe i have this window after the run
No Device Connected
Would You like to try copy again?
YES NO CANCEL
boy my SPV is in bootloader mode and i can't riun it in different mode
i have IPL 3.15.0001 and SPL 3.15.0000
What i have to do ???
PLEASE HELP ME
after upgrading my universal's rom to Jwrightmcps Crossbow ROM Update 2.12.08 WWE, my universal suddenly turns off very often.
with other versions of wm6 it has the same problem.
i've updated my bootloader from 1.0 to 1.01 but still no result.
i can use the universal for a few hours but then when i open internet explorer for example it turns of and it won't boot. then after a while it boots again
has anyone an idea how to fix this?
I had excactly the same. Bought a new battery, and everything was solved. it may help..
Hi all.
I bought a Wizard yesterday second-hand and quickly discovered a problem. Whenever I try to access the SIM, I get a "Phone is not ready - please wait 15 seconds and try again" message. Waiting 15 seconds doesn't solve it, and nor does a hard reset.
After a bit of searching, it turns out this problem is commonly solved by a hard reset or a new ROM flash. I flashed the WM6 Faria ROM (it, and the problem is still there.
Does anyone know how to solve it?
Here's my Wizard's info:
G4, IPL: 2.21.0001 SPL 2.21.Olip
Thanks in advance.
maybe you have a problem with your sim card.have you tried with other sims ?
MunkeyQ said:
Hi all.
I bought a Wizard yesterday second-hand and quickly discovered a problem. Whenever I try to access the SIM, I get a "Phone is not ready - please wait 15 seconds and try again" message. Waiting 15 seconds doesn't solve it, and nor does a hard reset.
After a bit of searching, it turns out this problem is commonly solved by a hard reset or a new ROM flash. I flashed the WM6 Faria ROM (it, and the problem is still there.
Does anyone know how to solve it?
Here's my Wizard's info:
G4, IPL: 2.21.0001 SPL 2.21.Olip
Thanks in advance.
Click to expand...
Click to collapse
Which radio ROM are you using?
I had a similar problem before and found that radio ROM v2.25 fixed it (don't know exactly why it worked but it did). You can do a search on the forum to find the ROM.
Hi all,
I need some (urgent) help with my blackstone:
At boot it shows "battery level low, device will shut down" and it does
Tried to flash a new rom, no problem
tried to flash stock rom, no problem
tried a radio, no problem,
tried an other battery, same problem
Did a diagnostic to the device and came up with the next message:
" Get oemspl fail!
Verify str not found
PLS check SECU-FLAG on/off"
What can i do to get my device back?? This happened after charging with an original htc car-charger and i had a battery discharge in 4 hours (from 100% to 0%)
All other tests are passed with the diagnostic tool
I have olinex 1.56 spl, tried to re-install, changed radio but still device seems to be dead.
Battery info:
ID 4
TEMp 3094
VOL 3004
CHGR curr 2883
Volt 3577 mV
Current: -320mA
cap 0
temperature 501
Maybe it's time for a new battery but i tried with a different one and the problem persists.
HELP HELP HELP HELP
Note: bought it unlocked..........
becosemsaida
i think your battery is dead man, its time for a new battery