Wen i upgraded my radio rom to te 1.13 on the ftp i got a gsm error and my Magician works but got no as a phone.
Somone knows to resolf this becaus i cant preform an update any more. Wit the maupgrade file the radio firmware wont instal and with te sd card backup il get an error section 1.
1 of how can i restor trough sd radio upgrade how muts bytes do i have to kopie.
Help me
Related
I have just downloaded for o2.co.uk/xda website the new Radio Version 4.21.00 and it corrected the 1% flash Failed error.....
It just did the upgrade smoothly finally i am back to o2 Rom
Didn't work for me.
Download the file
http://www.qosman.net/cgi-bin/countit.cgi?act=download&file=wwb9r_boat.zip
Extract the file in your SD card
Place the SD card into your xda
It will install the program automaticlay
How to upgrade T-mobile wit bootloader ? I haven't any prog, and haven't SD card. T-mobile cannot accept Programme A "connection error"
You have nothing, you do nothing!
or ask an expert to do it without risk!
Ok, one years ago I upgraded this O2 with bootloader + serial cable. Now, I upgrade to t-mobile firmware and can not accept programme A. I cant remember what is the name of software (serial upgrede,with bootloader)
Ok first go to Start, Settings, System, Device Information and post whats listed as this will give us some insight in to your device.
HTH
ROM: 4.00.16 ENG
Radio: 4.16.00
Protocol: 32S54
PW10B1
Wadarr said:
ROM: 4.00.16 ENG
Radio: 4.16.00
Protocol: 32S54
PW10B1
Click to expand...
Click to collapse
Your XDA version cannot work with programm A.
you need buy SD card and SD card writer!
You don't have these things, so you cannot do anything! :roll:
but a usb sdwriter really dont cost all that much
nor does a sd flash card unless you want it to be bigger then 128MB
Ohh ****.... so, it is impossible to flash with serial or usb cable and bootloader 5.14 ? Yesterday it was a PW10A1.....
anyone have 3.12 or earlier PPC version in .nbf file ? I have 32 mb SD card, but 3.17 is bigger than 32 mb. (32.2)
Wadarr said:
anyone have 3.12 or earlier PPC version in .nbf file ? I have 32 mb SD card, but 3.17 is bigger than 32 mb. (32.2)
Click to expand...
Click to collapse
I have 3.08.09 ROM!
You must use TMO2003.exe update program.
When it run, it will install all file on c:\program files\ruu\..
It will check rom version on c:\program files\ruu\english\NK.nb1
When it chech rom pass copy your own rom(o2 or other ....) to c:\program files\ruu\english\ then press Next.
When you finish rom update you must run o2 program B to update your radio stack.
I'm aware that this is not realy new subject but reading the forum for last two days did not unswered all my questions and Im a newbie so please dont shoot.
I'm assuming that the my xda site before providing the current upgrade to the OS and radio stack they had tested all these and it should be safe to upgrade as with other softeware. Well I was wrong.
The Program A upgrade went OK but when I almost completed loading Program B I got the screen as I would switiched the phone ON and I was asked for my password. I entered my old passward which was not reconginsed two times after which the device rebooted shownig only top bar and keyboard on the bottom right hand corner. I went ot Telstra to check if this is due to my SIM card got freyed but they changed my SIM card to a new only because they have more up to date with lower Voltage requirement and this did not change a thing.
I've tryed Walloby bootloader but after while it displays "GSM ERROR".
I've tryed the power buuton+directional button+ soft reset which gets me to the 4 options
CE ROM TO SD
BOOT TO SD
CE+BOOT TO SD
GSM ROM TO SD
But when I select any of these using the directional button I get that the Card key has failed (I have 64MB MMC card that I bought some time ago and I have or had quite a lot of staff on it). I wander if all this is still t=here as my card reader/writer is asking to insert the card which is already there. I would not mind to get to my old software which had problems but was working or anything to get XDA back on line.
Please help I can not work without my XDA.
New Radio Stack and Telstra + Bootloader
I am running the latest O2 radio stack 4.21 on telstra fine. I used the O2 installation file off their site letting it do the Radio Stack and the O/S. Then I later upgraded the O/S using the SD method, and the Siemens SX56 AT&T branded WM2003 rom image.
With regards to getting yours back up and running - have you tried the "bootloaderfix.bat" file in XDAtools? (make sure you are conencted via activesync when you run it - and dont panic if you see an error message)
Also - you can use XDAtools to copy the Radio Stack image or new ROM image directly to your MMC card. Once bootloaderfix.bat has fixed yor boot loader to 5.15 ust whack in the MMC card with the image - run the bootloader and it will detect the new Image and ask you if you want to install (calls it download) it off the card.
Hope that helps. I spent about 6 hours researching all the above - hope to save some others the time
New Radio Stack and Telstra + Bootloader
Thanks Janos,
I will try the SD method but I have a problem with your suggestion as my Actvesync presently is not recognising XDA. I hope that XDAtools will help.
Would you suggest to use the original or XDAtools -Jeff.exe?
Regards
Rdio Stack
hi,
MY PHONE HAS GSM ERROR IN BOOTLOADER. DOES ANYONE HAVE GSM ROM. ALSO WHEN I PUT IN THE CHARGER, THE CHARGING LAMP DOEN'T TURN ON.
I CHECK ON DEVICE INFORMATION AND SEE THAT rOM VERSION:
3.17.03 ENG
ROM date 05/15/03
Radio Version: Not appear
Protocol version: not appear
DOES ANYONE CAN HELP ME TO SOLVE THIS PROBLEM. MAYNY THANKS.
HI,
HOW TO copy the Radio Stack image TO SD CARD? THANKS
janos wrote
Also - you can use XDAtools to copy the Radio Stack image or new ROM image directly to your MMC card. Once bootloaderfix.bat has fixed yor boot loader to 5.15 ust whack in the MMC card with the image - run the bootloader and it will detect the new Image and ask you if you want to install (calls it download) it off the card.
i can't radio rom in ur sd but u can copy repair.zip to sd ........... no way to upgrade radio via sd u must us pc monitor ans Rs232 ......... what's hell that mean ?......... use repair.zip .........guy
Hi all,
From my experience, and reading through this forum through long time, when you have "GSM Error" on the bootloader screen, don't try to go any further unless you are expert in soldering and you have a Jtag ship interface. The RSU part controls the ROM and the charging circuet, so it's better to get it repaired by a qualified person.
Hi all,
I have a spv m650 Orange with an Usb witch doesn't work. I connect my phone on my Pc, the spv is in charge but the icone of active sync is never green.
with my Cruise all is Ok.
I try to upgrade the spv with the sd cards but the bootloader anwers "Invalid certificate".
I think that it's normal because I have a SPL 1.84.
I would like know if I can change my SPL with my sd card?
If no, I would like found a rom witch work with this SPL.
when I use the ARTEIMG from orange (update 4_07) I don't have this message, the SPV displayed read sd card but nothing else.
Know, my SPV stay only on the first screen with the Version dysplayed:
IPL 1.84.0001
SPL 1.84.0000
GSM 02.67.90
os 1.84.0.0
and this I do a hard reset ,it's same.
if someone could help me, it will be nice.
For your M650, you have the a Orange ROM (probably 03-2007), you must :
-USPL before new upgrade (without Orange)
You must have a SD-CARD in FAT32 and a rom file (name ARTEIMG.nbh)
For AS, do you reset your phone, and reboot your PC ?
I had this problem with a M650, the usb connector was HS (the pins move)
Thank for your quick answer,
Yes, my sd card is in fat 32.
and when I try to upgrade with the bootloader, the SPV read well my SD because it can detect the good or bad certificate.
I already reboot a lot of time the PC and the PPC.
I agree with you that this is a problem on the usb Connector.
but I would find the original orange Rom with a good certificate just for go after the first screen.
I
Orange rom : http://www.mobilite.fr.orange-busin...r/entreprise/mobiles/ba/dl.php?mi=164&pi=2580
I already do it,
axtract from this exe the file:
ARTEIMG_ORANGE_FR_B2B_1.84.73.2_21.184.2.733_SHIP.nbh
rename this file by ARTEIMG
running the bootloader
then the spv display:
Update SD Image?
<- Press this key to start download
then the SPV displaying "reading from Sd" under a bargraph witch filling very quickly.
after 5 minutes "reading second OS from SD!"
and after 10 minutes "SD FAT Update failed !!!" I like the "!!!" on the screen...
but my card is in fat 32.
if I try with a card in fat or ntfs, the SPV doesn't see the card.
Make a check (chkdsk) of your SC-CARD, (what is the size of your SD-Card ?)
Rom Orange 04-2007 : http://www.mobilite.fr.orange-business.com/public/oev4/html/toolkit/php/obdddl.php?id=2539
the chkdsk is ok on my sd card of 1Go from sandisk
under the both links, there are the same file
http://www.mobilite.fr.orange-busine...mi=164&pi=2580
ARTEIMG_ORANGE_FR_B2B_1.84.73.2_21.184.2.733_SHIP. nbh
http://www.mobilite.fr.orange-busine...dl.php?id=2539
ARTEIMG_ORANGE_FR_B2B_1.84.73.2_21.184.2.733_SHIP.nbh
ReTry to download the Orange ROM, and Re-try .nbh and upgrade
i'm trying! I'm trying!
You can also :
If your phone is stuck in bootloader mode try this procedure using mtty:
Cmd> set 32
Cmd> password BsaD5SeoA
Cmd> ruurun 0
Cmd> ResetDevice
If this doesn't fix it, you need to flash your original ROM, matching your CID.
Do you try Orange_03_2007 ?
Oooops,
what is mtty?
must I use the cmd on my PC than with my usb connexion?
for your information when I run bootload and after I connect the usb, I can read usb on mthe display.
since half an hour the SPV is always with Reading second OS from SD!
do you have a link for orange_03_2007?
so this afternoon I will try with an other SD card, Maybe...
bonja69 said:
Oooops,
what is mtty?
must I use the cmd on my PC than with my usb connexion?
for your information when I run bootload and after I connect the usb, I can read usb on mthe display.
since half an hour the SPV is always with Reading second OS from SD!
do you have a link for orange_03_2007?
so this afternoon I will try with an other SD card, Maybe...
Click to expand...
Click to collapse
MTTY.exe
For Orange Rom, look with google "mise a jour SPV M650_0307.exe" or "mise a jour SPV M650_0307.zip"
BBK,
I chaged my SD card Sandisk 1Go by a SD card Toshiba 2Go and the upgarde from the sd card run to the end without problem in 10 minutes.
the SPV asked to select any key and after return to the bootloader screen with the three colours.
at this step,I made a soft reset and the SPV go througth the first screen and installed windows.
now the SPV run as the origine with the wm5. it's better than this morning but I don't understandand why it isn't in wm6...
Good news.
You have installed a Orange Rom (WM5), now you can USPL and upgrade with a WM6.5 rom.
You can also upgrade the radio rom, i'm using radio 3.21.90 in France.
For your SD-Card, you can install "ArtemisSDEnhancement.CAB" for correct Artemis bug with sd-card.
After you install "WM5torage_19.cab" and can active it and format you sd-card.
Hi, can you please tell me how do you resolve the problema of the miss connection between usb and phone?
I need help... i ha ve default rom but since today the phone won't connect.
Hello I have an HTC tytn (hermes200) and its on sweedish lang I would like it to instal a new rom to bo on english. I instaled SIM and CID unlocker and it works fine. But when I trie to instal a rom like CRC r13.5 it disconects my phone from the computer, I use an USB conection via ActiveSync. That conection works fine when I transfer files or something else and the only time it disconects is when I trie to instal the new ROM, please help I tried everything and btw I dont have a SD card my curent OS is Win 6.0 Pro but I dont understand a word of the lang heh, but the phone is so cool and I just cant give it away.
Please help guys..... Sorry for my english...!!!
btw I instaled Hard SPL v7 and SIM and CID unloacker without any problems, the only problem is instaling the ROM...!!!
re-installHard SPL V3 if you installed before the sim/cid unlocker.
Use the sd card method to install a new rom... Just make sure you have a 2Gb sd card or less and its formatted FAT32(they are default FAT).
copy the .nbh file of the rom you want on to it and rename to hermimg.nbh. insert into hermes, reset into bootloader(tri-colour screen) and follow the prompts. If you did it right then you now have a new os on your Hermes.
Depending on the os on your pc it could be a few different things...
If you're using XP then upgrade the .net framework to 3.5.
Vista and 7 I can't say...
Ok thx I will trie to flash from the SD card I hope it works...
This may help..
http://forum.xda-developers.com/showthread.php?t=640485