Hi all,
I have a spv m650 Orange with an Usb witch doesn't work. I connect my phone on my Pc, the spv is in charge but the icone of active sync is never green.
with my Cruise all is Ok.
I try to upgrade the spv with the sd cards but the bootloader anwers "Invalid certificate".
I think that it's normal because I have a SPL 1.84.
I would like know if I can change my SPL with my sd card?
If no, I would like found a rom witch work with this SPL.
when I use the ARTEIMG from orange (update 4_07) I don't have this message, the SPV displayed read sd card but nothing else.
Know, my SPV stay only on the first screen with the Version dysplayed:
IPL 1.84.0001
SPL 1.84.0000
GSM 02.67.90
os 1.84.0.0
and this I do a hard reset ,it's same.
if someone could help me, it will be nice.
For your M650, you have the a Orange ROM (probably 03-2007), you must :
-USPL before new upgrade (without Orange)
You must have a SD-CARD in FAT32 and a rom file (name ARTEIMG.nbh)
For AS, do you reset your phone, and reboot your PC ?
I had this problem with a M650, the usb connector was HS (the pins move)
Thank for your quick answer,
Yes, my sd card is in fat 32.
and when I try to upgrade with the bootloader, the SPV read well my SD because it can detect the good or bad certificate.
I already reboot a lot of time the PC and the PPC.
I agree with you that this is a problem on the usb Connector.
but I would find the original orange Rom with a good certificate just for go after the first screen.
I
Orange rom : http://www.mobilite.fr.orange-busin...r/entreprise/mobiles/ba/dl.php?mi=164&pi=2580
I already do it,
axtract from this exe the file:
ARTEIMG_ORANGE_FR_B2B_1.84.73.2_21.184.2.733_SHIP.nbh
rename this file by ARTEIMG
running the bootloader
then the spv display:
Update SD Image?
<- Press this key to start download
then the SPV displaying "reading from Sd" under a bargraph witch filling very quickly.
after 5 minutes "reading second OS from SD!"
and after 10 minutes "SD FAT Update failed !!!" I like the "!!!" on the screen...
but my card is in fat 32.
if I try with a card in fat or ntfs, the SPV doesn't see the card.
Make a check (chkdsk) of your SC-CARD, (what is the size of your SD-Card ?)
Rom Orange 04-2007 : http://www.mobilite.fr.orange-business.com/public/oev4/html/toolkit/php/obdddl.php?id=2539
the chkdsk is ok on my sd card of 1Go from sandisk
under the both links, there are the same file
http://www.mobilite.fr.orange-busine...mi=164&pi=2580
ARTEIMG_ORANGE_FR_B2B_1.84.73.2_21.184.2.733_SHIP. nbh
http://www.mobilite.fr.orange-busine...dl.php?id=2539
ARTEIMG_ORANGE_FR_B2B_1.84.73.2_21.184.2.733_SHIP.nbh
ReTry to download the Orange ROM, and Re-try .nbh and upgrade
i'm trying! I'm trying!
You can also :
If your phone is stuck in bootloader mode try this procedure using mtty:
Cmd> set 32
Cmd> password BsaD5SeoA
Cmd> ruurun 0
Cmd> ResetDevice
If this doesn't fix it, you need to flash your original ROM, matching your CID.
Do you try Orange_03_2007 ?
Oooops,
what is mtty?
must I use the cmd on my PC than with my usb connexion?
for your information when I run bootload and after I connect the usb, I can read usb on mthe display.
since half an hour the SPV is always with Reading second OS from SD!
do you have a link for orange_03_2007?
so this afternoon I will try with an other SD card, Maybe...
bonja69 said:
Oooops,
what is mtty?
must I use the cmd on my PC than with my usb connexion?
for your information when I run bootload and after I connect the usb, I can read usb on mthe display.
since half an hour the SPV is always with Reading second OS from SD!
do you have a link for orange_03_2007?
so this afternoon I will try with an other SD card, Maybe...
Click to expand...
Click to collapse
MTTY.exe
For Orange Rom, look with google "mise a jour SPV M650_0307.exe" or "mise a jour SPV M650_0307.zip"
BBK,
I chaged my SD card Sandisk 1Go by a SD card Toshiba 2Go and the upgarde from the sd card run to the end without problem in 10 minutes.
the SPV asked to select any key and after return to the bootloader screen with the three colours.
at this step,I made a soft reset and the SPV go througth the first screen and installed windows.
now the SPV run as the origine with the wm5. it's better than this morning but I don't understandand why it isn't in wm6...
Good news.
You have installed a Orange Rom (WM5), now you can USPL and upgrade with a WM6.5 rom.
You can also upgrade the radio rom, i'm using radio 3.21.90 in France.
For your SD-Card, you can install "ArtemisSDEnhancement.CAB" for correct Artemis bug with sd-card.
After you install "WM5torage_19.cab" and can active it and format you sd-card.
Hi, can you please tell me how do you resolve the problema of the miss connection between usb and phone?
I need help... i ha ve default rom but since today the phone won't connect.
Related
Hi,
This is the first time I try to upgrade my Qtek :roll: . I downloaded the RUU3.16.52.exe and RSU3.23.01.exe .
But I run the RSU3.23.01.exe (by mistake ) which completed successfully. When I run the RUU3.16.52.exe it continues until the last step where it say connecting to device and then exists and nothing happens on Qtek nor on the PC.
Any help appreciated.
ReNEGade
I have a stupid idea if the flash utility doesn't work for your machine.
You need a SD card and SD card reader, and the XDArite.exe (XDA rom image tool) , extract the rom files from the ruu3.16.52.exe (nk.nbf) and write it to the card.
Then insert your SD card to the Qtek and enter the Bootloader, flash the rom , everything will be ok.
:evil:
Hi everyone,
am deperately needing your advice!!!
Just yesterday I rechieved an exchange mdac from tmobile showing serial version v1.02 when put in bootloader mode(previously v1.01).
When trying to flash whatever rom once transferred via ntrw to my sd card, my mdac does simply nothing but stay in bootloader showing serial v1.02. No flashing like in my old one starts.
On removing the sd card it comes out freshly formatted, before it definately was formatted with raw as usual once working with ntrw.
Result : I can not upgrade my system to mksbigstorage or any other rom like i could with my" old one". (same sd card!!!)
Tried downgrading to an older rom version via original upgrade routine and from there flashing via sd card: same problem!, tried other sd card: no solution either!
Any ideas, solutions, people with the same problems?
:?:
Appreciate your help
Thanx
romflashing
Seems to have nothing to do with flashing routine.
Card simply gets formatted once inserted.
Any way to stop this?
Hi! I have had many problems after flashing and re-flashing my rom.
Try boot loader mode and USB then execute (from your PC)MaupgradeUT_noid with a Shipped_rom on XDA ftp. It may work.
Have a look at this link: http://www.mtekk.com.au/forums/viewtopic.php?p=32876
Regards
Try to write SD card with winhex not ntrw. Simply choose open disc feature and write file directly do SD it works every time for me (with ntrw it was roulette). I have 1.02 bootloader
Thanks Shamus but can you explain in details how do you do this with Winhex? my bootloader is 1.00
SPV_M500, ROM 1.12.02 FRE
RADIO 1.12.10
EXTRom no more
G'Day!
I managed to pickup a JAMin to replace my aging O2 XDAII Mini. (*I wanted WiFi)
But on setting up everything again, the SD slot has junked out on me in around 2 hours of usage from new!
Ive got 2 cards - SanDisk 2GB Ultra II & Lexar 256Meg - both of which worked for the 1st test, now both are not recognized by the phone.
My SD reader on the computer says and plays them fine. - In the ABOUT of the phone it says that the "EXPANSION SLOT" is not in use with any card installed.
I've tried firmwares:
1. RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
2. JAMin_WWE_2130923_21309112_020720_ship
3. JAMin_WWE_213923_2139123_022021_ship
.....With no luck....infact Im stuck on the RUU one now with the NBF file error now! and still no SD able to be read in the phone!
PLEASE give me guidence before this becomes many...many...MANY bits of plastic!!! :evil: :evil:
___LEO____
Try reformating your SD card in the PC card reader. It will erase all data, so back it up, but it might work.
Cheers.
UPDATE....
Thanks krale!
But the SD's work fine in my Magician and my SD reader.
I've tried that though...just in case.
No deal.
I've found a Telstra patch on the iMATE site in AU....and strangely it started to work for a bit.
It now will lock up for no reason and black screen.
Soft-reset will work, and I got to watch/try out things on it!!! YAYAYA!
Then 10 mins into watching a .avi show it froze and now will no longer see any SD's again.
AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
In order to get a repair I think I should downgrade its OS/firmware to the original imate versions. (The current one is a DOPOD).
But it gives me the ERROR [296] : UPGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get newer NBF file.
How do you downgrade the OS/Firmware versions?
THANKS ALL!!!
You'll be stuck in RUU (or DOPOD) ROM cause is 2.15.13.27 and it's newer than iMATE 2.13.09 you can't downgrade if you have uoyr PDA CID locked. You've have to upgrade to a ROM like the DOPOD one that you have or to one with upper number i.e. 2.15.14.00 but no to an older one.
help me
i flash my 838pro now can't poweron when i press power key in three
color screen model
i can't remember what version rom i flashed but when process 11% stop
report 262 error use ruu update
now i can see the infomationg in three color model:
herm100
ipl:1.04
spl:2.10.01ipro
what can i do can save my herm 100
orange spv m3100 branded
1st, calm down.....
Now, its good you Hard SPLed your phone. Try upgrading your os with the sd card. None of these communication errors.
1st thing to do is backup your sd card to pc if you havr a card reader. Then format it fat32. Open the installation files, you should see two files, "RUUWrapper.exe" and "RUU_signed.nbh".
copy the RUU_signed.nbh file onto your sd card and rename it to "hermimg.nbh".
Put the card into your hermes and reset. Since it is going into bootloader anyway you won't have to do it manually. This should then upgrade the os. You will be aske to press the power button to update. As long as the rom you were trying to upgrade to before DIDN'T have a radio rom portion you should have no problems with you phone.
All the best, Cheers...
I have ARTE100. I Used HARD RESET. But ROM on Extender ROM was damaged or something. I see only White booting screen and ofcourse Bootloader. But if i can Unlock CID or Flash new ROM have Error 270.
ActiveSync is Grey .
I have many programs from this great page which unlocking CID etc. But always stoping on ERROR 270.
Tryed on windows Vista 64bit but 64bit old drivers for PPC are delete from this forum.
Then i tryed on winXP 32 .. fresh install with full SP and others repairs. Same error. System see only USB device but Active Sync nothing.
Artemis_USPL - cant see Device
WST v4.2.2 setup same
few program can start Flashing but as allways Error 270 cant see Device on 100% install.
I read tons of pages and still .. device isnt online.
Are some special drivers or manual for Artemis?
Thanks for answers Michal
i used to get the 270 error when i left my 8G micro sdhc card in.
solved it by putting the normal micro sd card in the phone when i want to flash any rom on my p3300
don't know if it is your case also, but could be.
Done .. device need clear SD card and 1.12 default Rom from Provider/HTC. Easy after 2days.