Hi there. During a ROM upgrade my ASUS a600 runned out battery power.
So I got a "brick" or I think so.
I've got a 128MB SDCARD with the original ROM and the UPGRADE ROM but I can't use any of the "secret" key combos to enter the FLASH/self diagnostic menu.
Can I download the bootloader from somewhere? Is that possible to reset the ROM and make it run again?
I appreciate any help. Thanks.
Related
cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help
If it is realy a brick without any chance of life I need a part of it: the keypad.
Thats really rude.
not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen
All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.
Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.
You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.
Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
Hi people,
I have a mayor problem. I just fu*ked up my phone by installing WM6.
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me!
s200 off
and I have this problem. my phone is off by installing new spl
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me
To go in the boot loader screen you have to:
press & hold camera and commmanager button
press the softreset hole
release the commmanager button and keep hold the camera button until the 3 colours display appear
Byez
but wat can i do after i hav the 3 colour screen come out?
pls help..... i'm very nervous..... i don wanna waste my money coz i screw up my phone.,...
i'm now outstation... can go back to the service center within this 6 mth....
Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.
mrsurya2000 said:
Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.
Click to expand...
Click to collapse
Which rom upgrade software ?
de.schurk said:
Which rom upgrade software ?
Click to expand...
Click to collapse
http://www.romupdate.ru/ghjibdrblkz...rophet_220734_2207114_024721_QtekWWE_Ship.exe --> this software
don't worry, your device isn't bricked as long as you can run it in bootloader
check in WIKI if you have G3 or G4 Prophet
I'm the exact same situation.
And wiki didn't help so far...
Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.
namco said:
Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.
Click to expand...
Click to collapse
Bear with me on the dumb questions
It looks like I managed to re-install
Thank you for your help. I installed the rom dezzer advised (post 7 of this thread) and it worked fine. Does that mean tha NOW i can flash smart1 1.3's?
Yep. Turn off the phone, make it sync with activesync and run UPDATE_ROM.bat.
Then cross your fingers Kidding. It will surely work. Remember to hard-reset after the upgrade.
If anything goes wrong just reflash WM5 and hard-reset. Always hard-reset after ANY OS upgrade.
Help!!!
I have been using a WWE WM6 ROM for a few weeks now, after having got out of trouble using the German O2 Orbit ROM. Since then been running WWE WM6 ROM and loaded a few extra HTC Apps - all fine!
Yesterday, tried installing a different ROM, now the device will not power on. USB or mains - nothing. No lights, no life :-(
Have I "bricked" the device, or does someone know how to resolve this?
Help!!!
It may still OK. It just cannot wake the OS up. Try to enter bootloader by pressing power + voice recorder + soft reset simultaneously, then flash with original ROM
Tried this - used this before...
The device just seems like it has no power...
No power, no way to reset - I have tried the "Voice" + "Power" + "Reset" combinations. I am familiar with getting into the Bootloader screen...
Unless anyone has a better idea, I'll have to go to the manufacturer and get it repaired I guess...
original ROM
Hi, where can I find the original ROM image of Dopod P800W?
I tried to sign up their web site but not worked.
Thank you very much for your help!
I used the sprite backup to get back the backup, and windows does not "get up" more. I also can´t put another version. I can not do anything. Is there anything I can do?
ps: windows hangs walk to get the boot.
I'm desperate, help me please.
When does it hang? Does it start? Why you can't flash a new rom? Is it dead at all?
Give us a tip to help you. If it starts tell us your rom version (2 or 3) so we can tell you the combination to bootloader.
When exit the bootloader, before starting the windows, it crashes.
The version is 3.
I think the problem is the boot that is bullied
So you can flash any 3.x.x rom using Acer 3.x hacked ACER_EUU.exe from DimICE via bootloader (by pressing Camera + VolumeDown + Power/Reset).
Pick the 3.x.x rom of your choice and follow the instuctions.
If you need more help I 'll be arround