can sumone please help i have sucessfuly set up activesync and it works fine however the internet does not.i tried usin the guide on this website but when i go to network cards the 1 that this guide ttells me to use does not exist in me ppc please help.thanx
im using a blue angel with wm5
i beleive the guide is only for bluetooth stacks which have PEN
if you use the ms bluetooth stack you dont have PEN
if you are connected to activesync using bluetooth and have choosen the my network as internet connection in connections in system
and your firewall is not blocking
you should be on the internet
thanx i will try
Related
hi all, i've the widcomm driver in my xda2, and them runs smoothly
but.. i've the need to share gprs connection from xda2 to my laptop... i can't for 2 different motives:
1) if i enable widcomm drivers, i try to launch the dial-up service... he connects to the standard GPRS provider... and 99% of time it resolves the hostnames... but can't download or ping them :roll:
2) if i enable the microsoft driver (deactivating widcomm, activating microsoft... and turning up the wireless modem software), i can't find the service for let me be connected. (i only see "voice gateway" bluetooth service )
before i installed the widcomm drivers, with this settings i can succesfully connect to GPRS & share connection over bluetooth.. the widcomm are probably the trouble :?
someone know a clear way for make it run smooth ?
I have just upgraded to WM6. I was using my Xda Exec as a blutooth modem for my laptop. But there is no dial up service in the new Rom. I am unable to use it as modem anymore. Can somebody, please help me to use it as modem? When I pair it with my laptop there is only one service option "Network Access Point" is available and when I try to connect the following error msg appears "connection from (Phone)" is denied. I am using Blutooth stack by Toshiba (Dell 350).
Toshiba bluetooth stack doesnt work with WM6.0, upgrade to Vista and use the default MS bluetooth.
Thanks for your advice. Can I use usb cable to make WM6 as a modem? If it is, then how?
toshiba stack 5.10.06 works fine with wm6 and with reg hack u can use it as a router over bluetooth so you can connect more then one computer, im using dells 350 bluetooth .
kivimart said:
toshiba stack 5.10.06 works fine with wm6 and with reg hack u can use it as a router over bluetooth so you can connect more then one computer, im using dells 350 bluetooth .
Click to expand...
Click to collapse
Thanks for that information. Can you please let me know how can I get Stack 5.10.06? Right now I am using 4.00.22(D)
umarulc said:
Thanks for that information. Can you please let me know how can I get Stack 5.10.06? Right now I am using 4.00.22(D)
Click to expand...
Click to collapse
http://aps.toshiba-tro.de/bluetooth/pages/download.php
kivimart said:
http://aps.toshiba-tro.de/bluetooth/pages/download.php
Click to expand...
Click to collapse
I installed that version but still same situation..... "connection from (Phone) is denied". Can you please let me know how to connect?
The only way that I have got this to work is to
- connect from Internet Sharing on the PDA; then
- connect from PC
this will get a connection, but the IP/DNS settings in the PAN network seem incorrect (set to 192.168.81.1, but not gateway or DNS).
- while connected, set the IP address and DNS settings in the PAN Network driver on the PC to obtain automatically, and the connection should then work.
A pain...
Hi all,
I've seen a lot of threads specifying how one would go about using the bluetooth to share the phone's internet connection. However, I would like to do the opposite, that is, share the PC's internet connection via bluetooth so that I can surf the net on my phone (I do not have wifi). Any help would be most appreciated.
http://forum.xda-developers.com/showthread.php?t=274581&highlight=bluetooth+modem
http://forum.xda-developers.com/showthread.php?t=313886&highlight=bluetooth+modem
many more hits of you use search and search "bluetooth AND modem"
thanks for the reply, but i already know how to do this. Perhaps you didn't understand my question; I do not want to use my XDA as a bluetooth modem. I would like to use my home ADSL connection via bluetooth to access the internet through my phone. This feature was there by default in my SE P910i, and I'm sure it should be possible to do this via my XDA as well. Once again, I do NOT want to use my XDA as a bluetooth modem
when connected to activesync pda's have the same network access as the pc they are connected to unless one have disabled it
so synch with bluetooth to your pc and you got it's internet
Check this page. Hope it helps you
http://www.geekzone.co.nz/content.asp?ContentId=449
I'm successfully running such a setup, using Linux (w/ bluez stack) on the Internet Gateway. However, I had only luck with the Widcomm stack on the Windows Mobile, w/ the MS stack, I could not manage to find any way to use DUN or NAP. With Widcomm, you can configure access via a "Bluetooth Access Point", which will use DUN services on the Host (Gateway) computer. On Linux, this means setting up dund (comes with bluez) and configuring a PPP profile for it.
Any idea if Widcomm BT stack is available for installing it on WM5. I think mine is with MS by default and couldnt find an option to configure it.
I think it isn't offered for free to the public. Nevertheless, there seem to be a few CABs with the broadcom/widcomm stack out there in the WWW. Google might lead you the way...
Thanks a lot for the feedback guys.
I have succesully used DUN with both my original iMate Jamin ROM and PDAViet 4.0.0.0.6 ROM to access the internet via a linux box running Bluez and dund.
I was hoping the new PAN profile in wm6 would allow me to simplify and setup a standard wm6 PANU -> linux NAP. However it looks like wm6 only supports running as a NAP and wont allow you to do that unless your connected to the internet via GRPS etc.
Is it possible to either add support for PANU in wm6 or activate the NAP without an active connection?
I'm not sure if I'm the only daft bat that does this. But in the past i would use my Hermes under wm6 as a Bluetooth Pan Internet sharing connection with my BA as it had the ability to either Host or establish a Bluetooht PAN link.
Since i've upgraded the BA to Wm6 I've noticed that as with my hermes the betowrk options are severly depreciated. and now when i search for Bluetooth services on the hermes it only shows Dial up networking but doesn't give you the option of Bluetooth PAN as a service it can find or give. also Can not set the init string to send to Bluetooth modem if choosen. thusly cannot tell it the access point etc.etc.
Is there any advise possible to help me link the BA with my hermes using Bluetooth PAN for the internet sharing through the hermes ( yea i know but HSDPA is far faster then the BA's basic 3g hehehe)
RESOLVED: the problem is in the Bluetooth stack of this rom. in short the Wm6 rom appearantly can't find a PAN connection at all as I tried to find the one on my PC at home and it definatly didnt' show anything accept a serial port. However my hermes could see the personal network conenction and once reflashed to the t-mobile latest rom it can now establish a PAN network conenction with pc or hermes300.
guess the bluetooth profiles in the rom for the BA in wm6 are a bit lacking at moment
It works great in Vista
Hi,
My Vista has automatically recognized my Hermes. No need to define a modem or connection string. Just run the Internet Sharing on Hermes and then it is seen in Networks and Sharing Cetner. I just open my IE and it works.
edwardgonen said:
Hi,
My Vista has automatically recognized my Hermes. No need to define a modem or connection string. Just run the Internet Sharing on Hermes and then it is seen in Networks and Sharing Cetner. I just open my IE and it works.
Click to expand...
Click to collapse
cool, only problem here is that my Hermes 300 ( t-mobile vario II) using Schaps 3.54c Wm6 Rom has the bluetooth Pan driver for internet sharing, as well as the modem link yea? And the Blue angel now being Windows mobile 6 doesn't show like Wm2003 did. in Wm2003 you could create a Bluetooth Netowrk connection for PAN to the hermes. Or a bluetooth serial connection to the hermes Modem link. Now it only shows Dial up networking in both since they are both wm6. And also doesn't give you the option of an init string entry in the advance network options for the AT+CGD init string that also lists the part "ip", "general.t-mobile.uk" which is the access point when doing Bluetooth DUN.
How would i establish a PAN connection to the hermes Internet sharing with the BA under Wm6 from helmi is the real question?
Ok I can assume then nobody else has 2 windows mobile 6 devices and tries to have one work via the other or nobody other then me has tried this.
Hermes300 windows mobile 6
Blue angel Helmi Windows mobile 6
cannot make a Pan connection in either direction Hermes to Blue angel, or Blue angel to hermes.
this means potentially people with Pda's ( ie: Compaq or HP Ipaq's runnign Wm6 ) or other mobile with wm6 will not be able to use the Helmi rom for internet sharing and really are better off leaving WM2003se on as has more compatability in that regard.
If however others have tried this and found a way to get it working please post =)
Me too
cyberjak said:
Ok I can assume then nobody else has 2 windows mobile 6 devices and tries to have one work via the other or nobody other than me has tried this.
Click to expand...
Click to collapse
I have two WM5 devices and am having exactly the same problem! I always through DUN was simple enough, but I am not going to get in to a debate about it versus Internet Sharing BUT why the hell did MS remove the "client" functionality? It is all very well and good if your Internet Sharing device (i.e. WM5 or 6 phone) is going to be the "server" but what if it is the client (as many PDAs will be).
I see no way of doing it! Anyone?
HeMan321 said:
I have two WM5 devices and am having exactly the same problem! I always through DUN was simple enough, but I am not going to get in to a debate about it versus Internet Sharing BUT why the hell did MS remove the "client" functionality? It is all very well and good if your Internet Sharing device (i.e. WM5 or 6 phone) is going to be the "server" but what if it is the client (as many PDAs will be).
I see no way of doing it! Anyone?
Click to expand...
Click to collapse
you can still use the Modem link if you can get it to create a serial port bluetooth link , ie: pair the devices and select Serial Port. then under the connections then you would tell it to use Bluetooth Modem
and put in the advanced dialing string for bluetooth DUN.
there are a few threads about bluetooth DUN on this forum.
the only thing i can thnk of that would make this not work however is if the roms your using are cooked roms and the profiles in the bluetooth stack are missing on 1 or both for the features suggested.
this is what stopped me from having this work as the wm6 on the Hermes and on the Helmi rom are missing the profile for HOSTING a PAN directly without internet sharing and dont' offer bluetooth serial port as an option
I want to connect my HD to the internet via a Bluetooth Accesss Point (Billionton) or via my Laptop via the Bluetooth Network (LAN access) which is coupled with the main LAN with Internet Connect Sharing.
I allready found the BT PAN network card on the HD (settings > connections> wi-fi > wireless networks > network adapter), but I do not know how to configure it (I did try several options, none was ok).
Did anyone succeeded to connect the HD to the internet via PAN? if yes, then please advice.
BTW, currently I can connect to the internet via the BT serial port (used by Activesync), but this connection is rather slow.
Thanks
Hi!
I have the same problem. I can't even connect activesync through bluetooth. Did you find any solution to this?
If connecting through wireless is possible to, that would be preferable as it's probably alot faster.
bluetooth
hi
i give my phone to my family and when i give it from him my bluetooth dont work and when turn on and visible this nobody can see this and i cant find any body when my bluetooth search for people plz help me.
bye
http://wiki.xda-developers.com/index.php?pagename=Unrestricted BT PAN server with the MS BT stack
hi
thank you but i cant understand that post if have software whats that and if its need seting plz tell that to me in basic english .
good by