Database Users

Disable auto connect to GPRS or 3g

Hi
Without going through every application how can I setup the connection options to only automatically connect when wifi is available or when docked. Idealy I would like to be prompted to connect via GPRS or 3g network? Any reg hacks on this one?
Regards
Eric

GPRS connection disable or prompt
hi, I'm having the same issue as above...would like to connect to GPRS manually only.
anyone !??!

me to, i am only on a limited plan for gprs/3g and the costs are quite high 2c p kb.
i use wifi at home a lot, so usually not a problem, but dodgy activesyncs to exchange server, or accidentally opening IE auto connects 3g gprs without prompting.
Any hacks, or software that anybody knows about.

I also need this, i ran my bill up without knowing/wanting to

simon_darley said:
accidentally opening IE auto connects 3g gprs without prompting.
Click to expand...
Click to collapse
I have changed my default IE page to "about:blank" - at least it means that IE doesn't go off trying to load a page by default that I'm most likely not interested in, but it also prevents it from connecting GPRS/3G should you start it by accident.
Cheers,
Steve.

Has anyone had any luck with this? I also am on an expensive tariff and unwanted connections prove costly. I have not yet found the answer, but will keep you all posted if I stumble across a setting/hack.

Would also like some tips on this, dont know whats dialling up 3g, but everytime i looked at my phone it was bloody connected grrrr.

Im also intressted, i need like a on/off button for the gprs. My damn egress updates my blogs/rss streams all the time. I have disable autoupdate in egress but it still wants to update sometimes :/

I've found nothing yet and have resorted to removing my GPRS settings until sorted.
I will crack open C# and attempt my first PDA utility - with the aim being to prevent GPRS/GSM from connecting unless something is manually toggled. Wish me luck

dudes, this has been posted a few times already
it's a part of the t-mob ext rom.
enjoy
joe

joebongo said:
dudes, this has been posted a few times already
it's a part of the t-mob ext rom.
enjoy
joe
Click to expand...
Click to collapse
What does this cab file do exactly? Does it give you an option to manualy connect or does it turn GPRS off completely? Plus where can we find the option to turn it ON if we can?
One more thing please, can I install this cab file on my O2 XDA Exec without any conflicts since it was made for T-Mobile?

I am not 110% but I believe it appears in a number of carrier ext roms, and just stops GPRS from being attached all the time (like an idle disconnect perhaps?)
When you want GPRS, then you can connect by starting the application you want (ie : Internet Explorer) and GPRS kicks in.
Hope it helps.
Joe

couldnt find it in mine, using the imate jj.
will install and see what happens....

using vijay's method http://forum.xda-developers.com/viewtopic.php?t=37963
you still get the msg that it is trying to connect and eventually an error msg, but better than a big phone bill

Hi guys !
I've installed the .cab on my 9000 and G icon is now disappeared
In the future will be possible to uninstall the .cab and restore the icon ?
Thanks :wink:

GPRS Disable / Enable

Is there an app available that will allow me to diable or enable GPRS usage ? I would like to use GPRS when im out and about, but dont want my phone doing things like connect to GPRS if I forget to sign out of messenger when ive been using wifi. When the phone switches itself off, it will connect via GPRS and download any messages emails.
I have put some dummy accounts in to stop it connecting but it keeps coming up with unknown application errors then although it does stop it costing me any download allowance / money.

Anyone ?

knowsleyroader said:
Anyone ?
Click to expand...
Click to collapse
Maybe you did not get an anwer because you posted it in friday the 13th
But I want the same.
I am going abroad later this month, and I don't want any program to connect via GPRS.
It just costs too much.
So does anyone have a solution to disable connection by GPRS?

Hi all. All you do is press and hold the call end button for a few seconds and GPRS will be switched off.
knowsleyroader said:
Is there an app available that will allow me to disable or enable GPRS usage ? I would like to use GPRS when im out and about, but dont want my phone doing things like connect to GPRS if I forget to sign out of messenger when ive been using wifi. When the phone switches itself off, it will connect via GPRS and download any messages emails.
I have put some dummy accounts in to stop it connecting but it keeps coming up with unknown application errors then although it does stop it costing me any download allowance / money.
Click to expand...
Click to collapse

MACkjam said:
Hi all. All you do is press and hold the call end button for a few seconds and GPRS will be switched off.
Click to expand...
Click to collapse
I think you are mistaking the question.
If you press the Call End button for a few seconds, it indeed will end the GPRS session.
For that moment.
But if an application want to connect, it reconnects with GPRS just that easily.
And that's what you are afraid of, when roaming.
I really want to control the GPRS connection, off or on.

I use SPB GPRS Monitor. It adds a Icon to the menu bar at the top. You just tap on it, tap connect, and there you go. You can disconnect also. The program is skinnable as well! Moreover, it monitors your GPRS usage so you know when Vodafone is over charging you
cya

I also use GPRS monitor, but that's not the issue here.
I know how to disconnect, but I don't want GPRS to connect automatically, whatever condition.
Just do not connect via GPRS unless I tell the wizard to do so.

i know how you can do it!!!! Close messager and you will not have the problem!!!!! does not take brains! If you cant do that why the heck do you have a phone like this, which must be really too high tech for you!

ronh said:
I also use GPRS monitor, but that's not the issue here.
I know how to disconnect, but I don't want GPRS to connect automatically, whatever condition.
Just do not connect via GPRS unless I tell the wizard to do so.
Click to expand...
Click to collapse
Oh, okay....no clue in that case
The best way would be not to save the password to the connection, so it asks for it each time. That will stop it connecting, but it is inconvenient
Hope that helps

funman said:
i know how you can do it!!!! Close messager and you will not have the problem!!!!! does not take brains! If you cant do that why the heck do you have a phone like this, which must be really too high tech for you!
Click to expand...
Click to collapse
Hmm, this is no fun-man.
I ask a normal question, so please give a normal answer.
I have pushmail, newsreader, weatherpanel, Messenger and maybe some more progs who connect automatically over GPRS.
In holland that's no problem because I have a flat fee abo.
But when I go abroad I have to disable each and every application by hand.
(Roaming GPRS is sooo expensive )
So this device is definately not too high tech for me, but I am looking for an easy solution and that's to control GPRS by hand.

One program does it all for you:
Vijay555's VJVolubilis program!
Google search for Vijay555. Go to Releases. He's got a bunch of software written by him (a BIG THANK YOU to Vijay - Viva la ViJay!)
Instructions:
- Install cab file.
- Create a shortcut (using Ilauncher or any other programs that allows you to) and change the properties to wot you need
- In your case, use the properties - -gprson or -gprsoff or -gprstoggle
- You can set one icon to turn GPRS on and one to turn GPRS off in case you're worried about toggling it on instead of off.
Works great for me.
And don't forget to donate to Vijay!
Hope that helps.

Thanx, that's really looking promising.
It seems exactly what I was looking for.
I will test this prog asap.

i have been looking for a prog like this so I do not get price raped when my gprs drops out...I will test it out thanks.

Auto-Disconnect UMTS?

I have searched the forum for a tweak that can automatically disconnect the UMTS data after being idle for X minutes but do not see it. I only see a tweak to keep it alive. I want the opposite. Any help would be appreciated.
thanks

On most roms all you have to do is press and hold the hang up button to disconnect the data by yourself.
S.K.

silent_killa said:
On most roms all you have to do is press and hold the hang up button to disconnect the data by yourself.
S.K.
Click to expand...
Click to collapse
I know that. But that is manual and tedious.
Some of my apps automatically open the data connection, so I want a way to automatically close it after it's done.

I am interested as well if someone knows of a tweak for it... When I hit the 3G area near my home, my battery goes pretty quick. On EDGE my battery life is awesome.

wimpy said:
I have searched the forum for a tweak that can automatically disconnect the UMTS data after being idle for X minutes but do not see it. I only see a tweak to keep it alive. I want the opposite. Any help would be appreciated.
thanks
Click to expand...
Click to collapse
There's a little program which does exactly this for GPRS. I haven't tried, but I would assume it also works for UMTS. To achieve this functionality, it just sets the value of the registry key HKLM\Comm\ConnMgr\Planner\Settings\CacheTimer to the idle time (in seconds) after which GPRS (and hopefully UMTS) will get disconnected.
Cheers
Daniel

tadzio said:
There's a little program which does exactly this for GPRS. I haven't tried, but I would assume it also works for UMTS. To achieve this functionality, it just sets the value of the registry key HKLM\Comm\ConnMgr\Planner\Settings\CacheTimer to the idle time (in seconds) after which GPRS (and hopefully UMTS) will get disconnected.
Cheers
Daniel
Click to expand...
Click to collapse
Nope, just tried that in my registry and it still doesn't disconnect.

GB-SOFT GPRS & Audio Tweak
i am running this on my universal for that purpose and it works on umts in tokyo. i haven't tried it on my hermes though as i want to keep the connection always on for my push email, but i think it should work on hermes as well. give it a shot, it's free.
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm

Here's something that may or may not be useful to some. I used to think that for ease of access to webpages I would have GPRS always set to on. I did this using Tweaks2k2 under phone tricks. But this was a pest as when I wanted to use wifi the GPRS kept trying to take over.
I went back to Tweaks2k2 and unchecked GPRS always on. Now when I'm not using wifi and I go to a webpage the GPRS connects nicely but the second it's downloaded the page it instantly disconnects itself and stays off - ideal for me.
Before, enabling the continuous connection and then disabling it using Tweaks2k2, if I connected to GPRS it would stay connected until I manually turned it off again, but now it does it automatically and without delay. (I'm assuming it was THIS that has created my, as and when needed GPRS connection). Certainly saves having to set idle times etc to get it to auto shut off.
Mike

Try PhoneAlarm
It has an option to do exactly this. I use it to disconnect after 2 mins and activesync to run every 30 mins and it has improved my battery life immensely.
Rob

I think it can help you. It's very usefull and saves the battery.
It's a little C program that checks the gprs/umts connections every 2 minutes. althought the pda could be suspended the program checks the connections every two minutes. If there isnt data flow then the connection is closes.
It has 4 buttons.
DISABLE: It disables the checks. So if you are surfing the web and you dont want the program closes the connection push this button.
ENABLE: Enable the checks again.
OK: Closes de window (the program continues activated. You can open the window again tapping the little blue icon in the botton).
CLOSE: Close the program.
I recomment the put it in ROM and you should create a shortcut and put it in \windows\startup directory.

Yip, another good one to try. Thanks
Mike

mikechannon said:
Here's something that may or may not be useful to some. I used to think that for ease of access to webpages I would have GPRS always set to on. I did this using Tweaks2k2 under phone tricks. But this was a pest as when I wanted to use wifi the GPRS kept trying to take over.
I went back to Tweaks2k2 and unchecked GPRS always on. Now when I'm not using wifi and I go to a webpage the GPRS connects nicely but the second it's downloaded the page it instantly disconnects itself and stays off - ideal for me.
Before, enabling the continuous connection and then disabling it using Tweaks2k2, if I connected to GPRS it would stay connected until I manually turned it off again, but now it does it automatically and without delay. (I'm assuming it was THIS that has created my, as and when needed GPRS connection). Certainly saves having to set idle times etc to get it to auto shut off.
Mike
Click to expand...
Click to collapse
Can you tell me what registry setting that modifies? I would like to have UMTS disconnect after it's done also. But do not want to install too many apps.

wimpy said:
Can you tell me what registry setting that modifies? I would like to have UMTS disconnect after it's done also. But do not want to install too many apps.
Click to expand...
Click to collapse
Sorry don't know answer - maybe somebody does??
Mike

It doesnt modify any registry setting. It is a program checking the state of the ras connections each 2 minutes........ Later i will post the source code. Now i have to go.....

danielherrero said:
It doesnt modify any registry setting. It is a program checking the state of the ras connections each 2 minutes........ Later i will post the source code. Now i have to go.....
Click to expand...
Click to collapse
I'm sure you are right but ever since I used Tweaks2k2 and turned the GPRS setting off the always on connection it disconnects from GPRS the second the page is downloaded. There is no wait for a period up to 2 minutes. As soon as I tap on another link to another webpage it fires up GPRS again followed by an instantaneous disconnect after page downloaded. Of course if it's caching the page the period of time it takes to display the page might be getting on for two minutes. However many pages take far less time than that - e.g. text only pages and I'm not aware of any delay in the GPRS disconnecting but I'll test this tonight.
Bottom line is this works for me, but as there seem to be, according to posts above, lots of applications to power the GPRS on and off (and stay off until it's needed), then presumably we are all happy now??
Mike

harryk1372 said:
i am running this on my universal for that purpose and it works on umts in tokyo. i haven't tried it on my hermes though as i want to keep the connection always on for my push email, but i think it should work on hermes as well. give it a shot, it's free.
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
Click to expand...
Click to collapse
Do you know which registry key it modifies? I rather manually edit the registry setting then install this program for that sole purpose.
thanks

wimpy said:
Do you know which registry key it modifies? I rather manually edit the registry setting then install this program for that sole purpose.
thanks
Click to expand...
Click to collapse
That is the program I linked to in the first post, and it uses the registry key I mentioned.
Just to double-check - after you made the change to the registry, did you shut down (keep power key pressed until a dialog box pops up - do not just soft-reset!) and reboot your TyTN?
Also, make sure GPRS Always-On is off: check that "HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A3 8-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\<your GPRS connection name>\AlwaysOn" is set to 0.
Cheers
Daniel

tadzio said:
That is the program I linked to in the first post, and it uses the registry key I mentioned.
Just to double-check - after you made the change to the registry, did you shut down (keep power key pressed until a dialog box pops up - do not just soft-reset!) and reboot your TyTN?
Also, make sure GPRS Always-On is off: check that "HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A3 8-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\<your GPRS connection name>\AlwaysOn" is set to 0.
Cheers
Daniel
Click to expand...
Click to collapse
All my other registry edits only require a soft reboot.
Btw, my AlwaysOn for that key is defaulted to 0 anyways. So just this registry setting alone does not disconnect my data when idle.
A side note, I have an 8525 and not a Tytn, but that shouldn't matter.

wimpy said:
All my other registry edits only require a soft reboot.
Click to expand...
Click to collapse
That depends on how quickly you reboot after you made a change. The registry is not immediately flushed back to Flash memory, so if you do a soft reset too quickly, your registry changes may get lost. A shutdown with the power key forces writing any unsaved registry changes to Flash memory, so you're always on the safe side.
Something different: SKTracker can make snapshots of a system (including the registry), and also compare such snapshots. The trial version is limited, but it can create snapshots and the resulting "diffs". I used that tool to find out what GPRS Tweak does. Might also be of interest to you. And you can uninstall it afterwards.
Cheers
Daniel

I'm suprise not more people are asking about this since UMTS appears to drain the battery so quickly. Oh well.

Want IE to use WiFi, not GPRS, like Skype does!

Hello all. I have a Cingular 8525 (WM5) that I have successfully setup to use my home WiFi connection. Skype works great. My signal strength is good. In the "Network Cards" applet, it shows my WiFi network (it's the only one listed) with four bars and a "Connected" status. Everything seems fine.
When I try to use IE, though, it always tries to use GPRS to connect! Under Connections->Advanced->Select Networks, I have chosen "My Work Network" for both options. It still tries to use GPRS!
I don't even have a SIM installed, so I have no phone service whatsoever. So why in the blazes is it trying to use it instead of WiFi?
Anybody got any ideas?
Edit:
Well, I got it to work by toggling flight mode on and then back off again. Then, I had to turn WiFi back on again (bringing the phone out of flight mode doesn't re-enable WiFi). After I did that, though, IE used my wireless connection. Go figure.
I wish I knew the real reason, though. Someday, I'm going to install a SIM in this thing and I want to make sure it's not using that over my home wireless connection. Guess I'll have to look into those GPRS hacks I keep reading about.

maybe not much help but I had the same problem recently. I turned the phone to 'off' (even though it had no sim in it) and left it - it resolved itself and it working fine!

Thanks Frank. Glad I'm not the only one.
As a sidenote, I checked the registry settings (hack) for GPRS and there were two ISP's listed: one called My ISP and another called Cingular ISP (or something to that effect). In both cases, they were already set to 0 (off), so I would think they should have already been disabled.

GPRS lock
Hey guys I found a program called NOData these program allows you to disable the gprs so you dont suffer the conectio while you're using wi-fi and loose signal strenght works great and really easy to use.
Cheers

Same Problem
I have a T-mobile MDA and it has the same problem. I can fix it by going to the communication manager, turning off "data connection", and then toggling the wifi off and then back on. That always seems to fix it. Also, just going to flight mode does the same thing.

my X01HT always connect to gprs..i dont know how to turn off it..i`ll try MoDaCo_NoData..

gprs lock
gonchi said:
Hey guys I found a program called NOData these program allows you to disable the gprs so you dont suffer the conectio while you're using wi-fi and loose signal strenght works great and really easy to use.
Cheers
Click to expand...
Click to collapse
hi,
how do i use this program.
the file shows extension .000 and .001
thanks

rpzab said:
hi,
how do i use this program.
the file shows extension .000 and .001
thanks
Click to expand...
Click to collapse
sounds like you opened the cab file on your pc. Download cab file transfer it to your device and open it from there.
Mike

Why does my HD2 keep connecting to the internet? (on its own)

Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.

shaliru said:
Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.
Click to expand...
Click to collapse
Did you disable the rest of the services ( HTC location service, stocks, Internet time sync, Facebook, Twitter, YouTube as well ? In my case the Stock were causing unwanted connections before I figured out..

jarbi said:
Stock were causing unwanted connections before I figured out..
Click to expand...
Click to collapse
I think stock was the culprit. I removed it from the home tab from day one and as a result couldnt access it's settings. I put it back on and sure enough it was connecting every 30 mins.
Thanks alot mate. I'll report back in a day or two with the results, though I'm pretty certain it was the stock application.

If you want to be able to turn internet off so it cant connect when you dont want it to then just install the attached cab, run the program then you can enable or disable both settings as appropriate.

I also recommend to use NoData.

Just go to settings->wireless control->connection->advance->select network(choose my work connection if you havent rename it yet) If you would like to use hsdpa/edge/gprs again you will have to change it to as it was before.

mskip said:
If you want to be able to turn internet off so it cant connect when you dont want it to then just install the attached cab, run the program then you can enable or disable both settings as appropriate.
Click to expand...
Click to collapse
Got a brand new HD2 and each time I install NoData, I get an error. What should I do to fix this please?

What's the error message you are getting?
WB

str0g said:
Just go to settings->wireless control->connection->advance->select network(choose my work connection if you havent rename it yet) If you would like to use hsdpa/edge/gprs again you will have to change it to as it was before.
Click to expand...
Click to collapse
the best solution without any installation .

HD2 connection problem
Hi i have encountered the same problem my phone keeps logging into its internet for no reason , i have to disconnect it regularly . now that i have downloaded the nodata.cap how do i use it ? i have installed it onto my phone . how does this file work

feliciang said:
Hi i have encountered the same problem my phone keeps logging into its internet for no reason , i have to disconnect it regularly . now that i have downloaded the nodata.cap how do i use it ? i have installed it onto my phone . how does this file work
Click to expand...
Click to collapse
Just run nodata and then follow the on screen instructions its easy to use.
Mark.

mskip said:
Just run nodata and then follow the on screen instructions its easy to use.
Mark.
Click to expand...
Click to collapse
Even better, you can use Dial-up Enabler/Disabler: works like nodata but interface is a little better and is more user friendly ;-)

thegios said:
Even better, you can use Dial-up Enabler/Disabler: works like nodata but interface is a little better and is more user friendly ;-)
Click to expand...
Click to collapse
Pls note that with nodata, you disable the internet connection but, if the connection is active while disabling it, you still need to end it manually after exiting nodata.
This sounds weird I know...
With dial-up enabler/dsabler it is a lot easier as you will see two connections: one is the internet connection configured on your phone and the other is the current active connection, and you can disable them at the same time.
In addition it does not have annoying confirmation messages on disabling and exiting

shaliru said:
Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.
Click to expand...
Click to collapse
how do u do auto disconnection tweak

HD2 connection problem
Connect your HD2 to your computer and transfer the cad file to your mobile.
Find the file on your phone using File Explorer (on the phone).
Double click on it and follow the instructions.
Then go to Start and locate the nodata programme.
Start it and disable what you want.
I disabled the Orange (in my case) internet connection and WAP.
In my case it is crucial that I donet't g automatic access to internet services when I roam because I am on a PAYG tariff.
£20 last me up to three months normally with a different phone (SIC) and since I started using my HD2 my last top up lasted me less than a week.
It's a rip-off!
Once beaten, twice shy...
I won't be caught again!
Hope this helps
Djam2011