I´m using XDA Mini (Germany), and I can´t find the option to turn off GPRS permanent.
Does anyone know how to turn off it completly? ´cause I don´t want my Telephonrechnung goes Sky-rocketing
you can close it on other devices by holding in the hangup button for awhile
and it's never on when you dont see the sync kinda iron insted of the triangle with signal str bars
if you want you can remove the settings in connection so it cant connect if it want to
I see, thanks.
If you've lost the button on the bubble to disconnect GPRS then check out this post.
Related
Another dumb question I'm sure but heh thats what this place is for, so those who know can tell those of us who dont!
How do I turn of the GPRS element of the wireless radio but still leave the phone on. On my XDA 1 I'd dial up via gprs for emai/web then when I'd finished I'd disconnect, leaving the GSMN phone on in the background. with the II when I dial up via gprs the only way to disconnect is to turn the whole 'wireless radio' off then turn the phone back on...not ideal.
Or am I missing the point!
it's the same on XDA I with WM2003 ... you can press the red button for 3 seconds and the GPRS will be down leaving the phone running ... or you can use this nice s/w http://www.gb-soft.cz/XDAII/default.htm
Good luck ...
Turning off GPRS
To turn off GPRS Point and Hold your stylus on the O2 icon until your connection settings pop out and untick the connection.
Hope this Help.
I have just recently got a Xda2i.
Every time I turn it on, i find the gprs enabled.
I have had my old xda2 for more than a year now and this has never happened before.
I am just worried that I am gong to get a shock on my next bill. :shock:
I know that it may use a few bytes here and there, but it tends to add up after a while.
The only way I can stop it from doing this is to go into flight mode. Whats the point of having a xda if the phone is always off? :?
maybe I have changed some gprs settings?
Concerned,
Frogger
The "G" sign at the top of the screen does not mean you are connected to GPRS all the time.
It simply means you are in a GPRS area of the network, so GPRS is available when you need it and connect by tapping the "G" symbol.
lydiachris, or maybe someone else can tell me how to make a disconnect after I've get connected to the Internet over GPRS. In WM2003 (not SE) there is a button Disconnect, but in 2003 SE there is only Hide button... so How can I disconnect from GPRS without tourning on Flight Mode?
Exept Press and hold Hang up Button. :roll:
Hi Lydiachris, please could you tell me where to get hold of the "I-Mate PDA2 ROM:v 1.11.144 WWE " rom. I have looked everywhere and can't seem to find a link. Cheers...
Frogger said:
I have just recently got a Xda2i.
Every time I turn it on, i find the gprs enabled.
I have had my old xda2 for more than a year now and this has never happened before.
I am just worried that I am gong to get a shock on my next bill. :shock:
I know that it may use a few bytes here and there, but it tends to add up after a while.
The only way I can stop it from doing this is to go into flight mode. Whats the point of having a xda if the phone is always off? :?
maybe I have changed some gprs settings?
Concerned,
Frogger
Click to expand...
Click to collapse
I think if you hold down the hang up button it disconnects the gprs,
it had me wondering for a while.
R
GeoKVANt said:
lydiachris, or maybe someone else can tell me how to make a disconnect after I've get connected to the Internet over GPRS. In WM2003 (not SE) there is a button Disconnect, but in 2003 SE there is only Hide button... so How can I disconnect from GPRS without tourning on Flight Mode?
Exept Press and hold Hang up Button. :roll:
Click to expand...
Click to collapse
But there ist no other way without extra software. PhoneAlarm 1.22 for example brings back the diconnect-button. Or use the taskbar-icon from SPB GPRS-monitor, it also got a gprs disconnect button and shows you all gprs stats. But only the full version does that, not that gprs-monitor coming from exROM (T-Mobile).
Here is very good application it adds missing disconnect button and few more options just place it in windows folder make soft reset and go to settings/system/GB-SOFT Tweak enjoy :wink:
My vario randomly connects to GPRS without asking me, i suspect this will be costing me on my bill, so I'd like to turn it off. How do i do that?
my XDA mini s does the same. But it is a WM problem. Let me describe my common situation.
Connected to Wifi, running MSN Messenger. Left device for a while and it went sleeping. It also turns off Wifi! But then when MSN needs to connect in the background, it goes to GPRS!! When I wake up my device, it has already used GPRS for MSN and when it wakes, it tries to connect back to my Wifi!!!!
I'm on roaming so the GPRS is dear-er.
Best way, is to create a null modem, or invalid connection. Set your device to connect to that null connection automatically when requesting for internet access. Not the best, but at least it won't cost you or me.
The thing is it does it when I'm not even doing anything, it just pops that gprs icon up and does its own thing.
OK I didnt quite follow what you said there, so imagine I'm an idiot who dosent understand what a null connection is, then explain it to me again....
Long press hang-down key.... (2-3 sec)
so imagine I'm an idiot who dosent understand what a null connection is, then explain it to me again....[/quote]
lol like your response,
I do agree with Humps, dont know of a way to turn of the gprs but his way does ensure it wont connect on its own.
when you goto settings/connections/connections (this is wm2003 that i refer to) you will see your t-mobile settings.
and the options to manage existing connections. go into here and create a new connection give it anyname you want (you want it not to work) give it any settings it will accept that are wrong,
then from the connections page at the bottom you have tasks and advanced.
when you want GPRS active goto advanced and select t-mobile
when you dont want it to be able to connect go back to the advanced screen and select the dodgy one you just created.
then if it tries to connect the settings will all be wrong and it will fail.
good plan.
I really wish it would ask permission to go online with gprs...personally I changed the name of the access point in my o2 settings, so it can't connect until I change it back to the proper name.
John
Pixel69 said:
Long press hang-down key.... (2-3 sec)
Click to expand...
Click to collapse
Even after a 30 second press, it still stays connected with the 'G' icon in the top of the screen.
I've tried setting up a new GPRS called dummy, so I'll se how it goes.
Is it the big [G] icon, or the small G with arrows around it?
Because the former just means that GPRS is available - only the latter means that you're connected to it.
you want to give SPB GPRS Monitor a try, even if only for the trial it will let you know if its using any while its idle,
good app would be well worth keeping in it.
I found a lot of posts where people ask for auto disconnect. My problem is the other way round: When I connect with GPRS after some 5 minutes or so my QTEK S200 disconnects by itself. This might be caused by the cab file MP_autoDisconnect_EnableDRM_prophetUA(AKU2.0)_060112.cab which I found in enhanced ROM?
I don't want to hard reset to see the effect this cab not beeing installed. Any ideas to help???
I have the same problem... lets see if anyone knows how to enable GPRS for longer then only 6 minutes.
I have the same problem... lets see if anyone knows how to enable GPRS for longer then only 6 minutes.
it's because of your mobile operator. i've the same sh.t here. it keeps disconnecting after 5-10 minutes and the traffic rounds up. and i have to pay more... i've a hima, my friend's SE W800 - same crap, keeps disconnecting. i'm sick of GSM networks, they're getting old and do not meet modern speed and reliability requirements. so i'm afraid we'll just have to wait until WiMAX or something else comes to replace an old man. cheers
You might wanna try this from wiki here:
If you want your GPRS (or EDGE) connection to always be on, set the following:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 1 (DWORD decimal)
And to turn it off:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 0 (DWORD decimal)
Note that |gprs connection name| will depend on the name you've given your GPRS connection
I'm on tmobile web n walk, so its a pain to wait for gprs to reconnect everytime.... I've just started using this for about a day, but looks ok so far... try it... see if its the magic ur looking for
zep said:
it's because of your mobile operator. i've the same sh.t here. it keeps disconnecting after 5-10 minutes and the traffic rounds up. and i have to pay more... i've a hima, my friend's SE W800 - same crap, keeps disconnecting. i'm sick of GSM networks, they're getting old and do not meet modern speed and reliability requirements. so i'm afraid we'll just have to wait until WiMAX or something else comes to replace an old man. cheers
Click to expand...
Click to collapse
I don't think it's connected to the provider as I know enough people using the same provider where GPRS stays connected a long time. The only difference we have is the PPC. I will try jamichy's solution later this week when I will be back home. In the meantime Craic Dub - does it solve the problem on your side?
jamichy said:
You might wanna try this from wiki here:
If you want your GPRS (or EDGE) connection to always be on, set the following:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 1 (DWORD decimal)
And to turn it off:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 0 (DWORD decimal)
Note that |gprs connection name| will depend on the name you've given your GPRS connection
I'm on tmobile web n walk, so its a pain to wait for gprs to reconnect everytime.... I've just started using this for about a day, but looks ok so far... try it... see if its the magic ur looking for
Click to expand...
Click to collapse
O.k. I couldn't wait and tested today. Now the connection seems to stay as long as you do not stop it.
But: It connects automatically to GPRS when you connect the phone to your provider. That's not really what I wanted. In other countries this will create extreme roaming costs.
Any other idea on how to stop this auto connect? Even using phonealarm's "do not start GPRS automatically" does not help, again it starts connecting when you dial in your Phone PIN.
:?
Seems the Reg Hack is not a brilliant idea... I have setup my device to power off display after 2min... when i press power button to come out of standby, it freezes the device for abt 40 to 50 sec
Its worse when i get an incoming call, the screen is on but does not respond to touch or pressing green button...
So i changed registry back... and bingo, everythings ok again....
But now, i've found another way, a little freeware app that does all I want and more, and you get the option to choose connect gprs on boot or connect when needed... etc... take a look at:
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
I'm using now, and seems ok
jamichy said:
:?
Seems the Reg Hack is not a brilliant idea... I have setup my device to power off display after 2min... when i press power button to come out of standby, it freezes the device for abt 40 to 50 sec
Its worse when i get an incoming call, the screen is on but does not respond to touch or pressing green button...
So i changed registry back... and bingo, everythings ok again....
But now, i've found another way, a little freeware app that does all I want and more, and you get the option to choose connect gprs on boot or connect when needed... etc... take a look at:
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
I'm using now, and seems ok
Click to expand...
Click to collapse
Sounds interesting. Still difficult for me to understand what it really does:
- What means "search GPRS [G] on start radio"
- What means "start [G] on start GPRS
- What means "Switch GRPS always On/Off hold till for following connection"
Can you tell me what it does non your side? Im a startting to hesitate trying to many things. I am still not convinced of WM5 - I installed GPS pgrs monitor (on QTEK CD...) which did not work together with phone alarm. And to deinstall was the ususal WM5 hassle, only using sktools and manual deletion of a file after another soft reser I was able to remove it again
Search GPRS ON start radio=gprs connects on startup
Start G on start GPRS=gprs connects when an application needs web connection, and stays connected
Switch GRPS always On/Off hold till for following connection=default settings, connect when needed, then disconnect
Havent had the phone freeze problem, and gprs connects on startup, and stays connected... which is fine for my tariff, tmobile web n walk unlimited gprs
jamichy said:
Search GPRS ON start radio=gprs connects on startup
Start G on start GPRS=gprs connects when an application needs web connection, and stays connected
Switch GRPS always On/Off hold till for following connection=default settings, connect when needed, then disconnect
Havent had the phone freeze problem, and gprs connects on startup, and stays connected... which is fine for my tariff, tmobile web n walk unlimited gprs
Click to expand...
Click to collapse
Seems to work flawlessly so far on my S200. Thanks for your help Jamichy!!
The only thing I'am still missing is EDGE in Germany... :wink:
hi i am new here with my first WM5 phone. i have a quick question that i would like to ask you people. i want to disconnect the GPRS after i have finished using the internet how do i do that? cuz after i closed the browser the GPRS would still be on and i cant find a way to disconnect it. can anyone show how to disconnect it. thanks alot
marktang said:
hi i am new here with my first WM5 phone. i have a quick question that i would like to ask you people. i want to disconnect the GPRS after i have finished using the internet how do i do that? cuz after i closed the browser the GPRS would still be on and i cant find a way to disconnect it. can anyone show how to disconnect it. thanks alot
Click to expand...
Click to collapse
Press and hold the "end call" button (the red button), after 5 seconds it will disconnect GPRS.
Hold the RED button for more than 5 second, it should normaly disconnect you. You can also use the third button in the com manager.
alrite thnx alot that was easy lol. i will try that. thanks again