Is it possible to uninstall it without hard-resetting the device ? Because i can't use my GPRS connection while it is installed. I'd also want to give a try to toshiba or widcomm drivers if they could work on MDA Compact.
BTW, is there any BT scanner proggy with logging funcionality ? (it should scan every ~ 30 secs for devices in range and make log of their MAC, type, name etc)
Thanks
bluesoleil nicely uninstalls with standard "settings\system\remove programs".
and about gprs... it should work as usually if you manually remove network card (btnic) that bluesoleil installs (delete some registry keys).
strange, but for me gprs works excelent even with this btnic.
Any ideas on the Toshiba stack? I installed it, but now not even my normal BT works after a hard reset
unistall
I think that you mean the unistall error, which occurs when you try to unistall the stack, i did that yesterday and all you need to do, is rename the BTMUSB.dll to something else, than uninstall and rename it to its original name, that should do the trick
uninstalling bluesoleil
Please help me removing bluesoleil in my add/remove prog folder...
am so clueless about this. thanks.
Related
I have installed Bluesoil at my S100 but it crashes my PPC so now i want to remove it but how?
And where do i find the original Bluetooth Stack from MS?
Hope somebody can help me..
You need to use 'remove programs' to remove the stack, and then put back in the ms registry entries removed that disabled the MS stack in the first place.
I've got these stored in a file at home, but cannot get access to them until later. Maybe somebody else could export a couple of .reg files for you (the BTIcon bit, and a section from devices)
When i try to remove it on "Remove Programs" is says that the Uninstall was unsuccessful and it could not remove the \Windows\BTMUSB.dll but i can not find the file in file explore. What can i do?
andrewpmoore
How you find them?
Use your desktop PC to find them (via ActiveSync)....
I want to use my Magician as a wireless modem over bluetooth with my laptop, but it isn't working... Now I use both windows and bluesoleil stack on my device.
With windows stack I try to use Wireless Modem utility, but without success (I can't see DUN profile on my device with laptop)... In a bluesoleil stack I was trying to select different COM ports in DUN preferences but without success too...
What can I do with this trouble?
P.S. Sorry for my bad english.
Did you use the A2DP extension patch for your MS Stack? If so, the Modem isn't available there. You need the original stack for the modem to work.
Yes. I'm using it.
I'll try to restore original state (but I feel it's a bit problematic...)
Yes. The only one solution to restore original stack was a hard reset. For now DUN is working correctly. Many thanx.
First of all i really want to thank all the Helmi_c and all the developers; My BA is most updated running wm6.
Well much better than wm5 but I have some issues:
1. cant sync it with my PC in anyways (BT, usb etc), USB drivers are not working correctly.
2. sometimes when i pick or dial a call, i cant hear nething.
and last but not relevant to this, guys how do i stop my BA slider from falling down when I use keyboard.
1. Try delete the actual partnership in AS, sync again; if not reinstall AS on PC
2. No problem here with the sound.
same problem here
I upgraded my XDA2s, customized it,backedup, then upgraded my brothers XDA2s and used my customized backup on his XDA2s.
Now my XDA connects fine, but his doesn't !!!
Both our XDa2s's are identical in everyway.
tried a hard reset and restore from another backup and still no luck!
we were trying to save time re-installing the same softwares.
tried deleting partnerships, no luck. tried spb backup and clone, no luck.
any ideas!
Do you get any error messages on AS? Can you browse the internet from device?
usb drivers
can anybody post usb drivers i think this is the problem cause my device isnt installed properly it says problem with inf file.
whoever is able to connect his device to xp desktop via active sync usb connection, please copy the drivers folder contents from program files in active sync folder.
thanks, hope this works
Is your windows firewall enabled? Since WM6 activesync makes use of a LAN connection to sync with the PC, you must allow activesync trough the windows XP firewall, or disable the windows XP firewall completely...
no sound problems with me...
did you try to install WM6_SoundFix_.cab ?
A-
I don`t know it this counts but I`m using WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5 ROM
and Radio ROM 1.15.00.
I found on the net bluesoleil bluetooth stack - so I decided to change it from original one witch comes with ROM (I`ve heard that this stack is better than MS stack). I installed cab as normal program. After soft reset I lost any bluetooth settings. So I remove this stack using Remove Programs (not without problems - some files stayed) - but it didn`t help - for example I didn`t have Bluetooth settings in HTC Comm Manager - "The file 'NULL' cannot be opened.".
So I found on this forum Broadcom stack build 3900.
I have done the 3900 upgrade (using this time restartradio - according to wiki) and after this the BT fails to start due to insufficient driver memory available (there is 60mb of available program memory). I`ve no access to Advanced tab and BlueTooth Manager. Soft reset the device as instructed - same thing.
Bluetooth in Settings always shows "Bluetooth is OFF".
In Remove Programs there is no Broadcom stack, Bluesoleil was.
So, my request is - What should I do to restore standart settings comes with ROM? How to remove broadcom stack? Any ideas?
Best regards,
Watcher01
One and very easy: do a PROPER hard reset and you have everything back working and then restore your backup from before the installation of BT stack.
BTW: where did you find BlueSoleil stack for PPC? Never heard of BlueSoleil writing stacks for Windows Mobile.
Find the Helmi MS_enable cab and install it; you'll get the ms stack back.
@jakubd: The bluesoleil stack for mobile isnt working on BA; will install, but you get the Null error.
jakubd said:
One and very easy: do a PROPER hard reset and you have everything back working and then restore your backup from before the installation of BT stack.
Click to expand...
Click to collapse
Hard reset is not an option - I`ve installed to many programs to do it again -
so I`m looking for easy way to restore default stack without hardresetting
jakubd said:
BTW: where did you find BlueSoleil stack for PPC? Never heard of BlueSoleil writing stacks for Windows Mobile.
Click to expand...
Click to collapse
On other ppc forum.
DANDANA said:
Find the Helmi MS_enable cab and install it; you'll get the ms stack back.
Click to expand...
Click to collapse
I can`t find this cab. I`m looking for it on this forum and in google - nothing found till now. Also I want to remove Broadcom cause it`s using about 3 MB precious main storage, but I don`t know which files and where do I have to remove (there is no information in Remove Programs)
jakubd said:
One and very easy: do a PROPER hard reset and you have everything back working and then restore your backup from before the installation of BT stack.
Click to expand...
Click to collapse
Hard reset is not an option - I`ve installed to many programs to do it again -
so I`m looking for easy way to restore default stack without hardresetting
jakubd said:
BTW: where did you find BlueSoleil stack for PPC? Never heard of BlueSoleil writing stacks for Windows Mobile.
Click to expand...
Click to collapse
On other ppc forum.
DANDANA said:
Find the Helmi MS_enable cab and install it; you'll get the ms stack back.
Click to expand...
Click to collapse
I can`t find this cab. I`m looking for it on this forum and in google - nothing found till now. Also I want to remove Broadcom cause it`s using about 3 MB precious main storage, but I don`t know which files and where do I have to remove (there is no information in Remove Programs)
watcher01 said:
I can`t find this cab. I`m looking for it on this forum and in google - nothing found till now. Also I want to remove Broadcom cause it`s using about 3 MB precious main storage, but I don`t know which files and where do I have to remove (there is no information in Remove Programs)
Click to expand...
Click to collapse
Here... in the first post
DANDANA said:
Here... in the first post
Click to expand...
Click to collapse
Thanks man, you saved my life.
Hello all,
This question i have asked many a times still didnt got any solution again asking once more. Now i cooked wm 6.1 for opal it works fine but whenever i cook wm 6.5 and above (wm 6.5.1/6.5.3) my wifi would autostart (wifi status is off in kitchen) on welcome screen... after configuration and first boot when i try to turn off wifi it gets off but after a soft reset my today setting, wifi, bluetooth , comm manager and a lots of things wont work.
So i have got some alternative solution but all have some problem.
1. If i remove serial32.dll my rom works fine but i wont have bluetooth working.
2. If i remove serial32.dll reg entry then also same result no wifi bug but bluetooth wont work.
3. If i remove bluetooth packages from sys same result as above.
So finally i dont have any solution even i tried to remove serial32.dll and later i made cab and installed but after installation it again conflicts and as a result my today setting etc wont work. I also tried switching some driver with gene, elfin but same result.
The only possible solution i see is:
1. To use a different bluetooth stack but unfortunately there are no alternate bluetooth stack for opal (but i tried to install widcomm one with little mod it worked but again iam not sure coz its not finding bluetooth devices)
2. Any alternate dll for serial32.dll which will do the work of serial32.dll but should be compatible with opal (omap 850).
Anybody as some solution?
Anyone has some idea?