Related
Upgraded to the new 1.60 ROM hoping to cure this annoying problem but if anything its worse.
I turn the phone off and within 5 minutes its turned itself back on for no apparent reason. No notifications or anything. Cant be doing my battery life any good if it keeps switching on
Any ideas?
That may be something to do with the way that ActiveSync is set up.
I've had this kind of problem in the past and found that by killing activesync by using a task manager of some variety and changing my 'network' settings that the problem goes away
Please excuse me, im quite a newbie at this xda malarky. My xda also turns its self on randomly since installing 2003. you said change your network settings. How and what do you change them to? I made sure that activsync is turned off, but it doesnt make much difference either way.
cheers
I have experienced the same...
And, I've been on multiple ROM's with no avail.
I'm not sure anyone has ever found a solution.
My activesync is turned off, but the damned thing keeps turning on. Its sitting in the cradle at present and it turns on every 3-4 minutes!!!
It is Active Sync
I had this problem with my charger in the car. It is not sufficient to kill the Activesync. You would have to go to the options in the Activesyn menu, go to the new options button in the PC tab (the first one) and there disable the box with the name "Enable PC sync using this connection". This you will have to enable each time you want to sync via the cradle. I don't have the problem in the original cradle, it is only with the thirdparty car charger. I sync via IR or bluetooth and that is always available via the menu in Active Sync.
Good luck!
Johan
ActiveSync i can understand when its in the cradle but currently its sitting on my desk and still turning on at random intervals sometimes 30 secs after i switch it off!!!
Signal strength maybe?
I have same problem, happens mostly in car but not exclusively.
I get the feeling that it's related to the cellular signal strength and the device loosing or regaining the GSM connection.
San Francisco has several zero or almost zero coverage areas so it's not unusual for a phone to loose and then regain a connection while driving or walking.
I would love this device if it worked as expected but at this moment it is the source of endless frustration.
im also having these problems they are head doing never used to turn itself on as soon as i hard reset it just started to do this now and its annoying me so much
Im also having these problems . I find a solution using registry cleaner of pocket mechanic.
Bye
Guys, Check the setting of the ActivSync, most probably you will find a schedule for synchronization is set every certain time. So, you have to switch it to Manual Sync.
I think this should soulve your problem.
Sprite Backup
I too had this problem. For some reason the enabling Sprite Backup battery monitoring and Scheduled Backups caused this. try turning these features off if you have it installed.
I have same problem, its really anoying, have not found a way to stop auto connection even after changing some setting on my computer Activesync & XDAii activesync. I'm guessing theres no way to stop it.
Is there an active sync update available? I'm using 3.7 (build 3083)
For those whose unit turns on by itself, please check:
From your PPC:
Start > ActiveSync > Tools> Options > Mobile Schedule
Make sure all 3 options are set to "Manually".
From your Desktop PC ActiveSync:
Tools > Options > Schedule
Make sure every active options are set to "Manually" as well.
You can manually sync but Activesync still keeps "looking for changes"
I need for help plsssss
if some body plsssss attch the last eddition of xda2nbftools because I am living in Saudi Arabia, and the web site to can download this file is BLOCKED here in Saudi Arabia, they are blocking web sites here then u can't open it at all and no way to can download it unless if it attached here in this forum
Here is it:
Same for me too,
Mine can turn itself on almost as soon as i turn it off, its a running battle to get it to turn off and i very rarely win, I have accepted the fact that mine will stay on most of the time now and have a second battery to help me through the day,
I checked all my settings and all mobile schedule settings were on manual and all the active options are set to manual too, so it wasnt those settings causing the problem,
I cant believe the lack of support that O2 are providing, if this was an HP handheld there would have been a fix for each problem as it cropped up within a week as they have done with each of their handhelds
do the people experiancing turn ons have a card in the Sd slot? i do but i notice when the device is off...... put a sd card in and the device turns itself on i only started to notice it turning on when i got my SD card i might take it out tonight and try then?
Yup, i have a card in the slot all the time, took it out for a few hours this morning and it was no different, still kept turning itself on,
I looked a bit deeper into it this morning too,
It seems that i use it, turn it off and it turns back on 13 seconds later, i turn it off again and it turns itself back on again 13 seconds later, so i try to turn it off and the power button has no effect, i have to press it twice to turn it off, then it seems to stay off for at least 30 minutes before going through the exact same sequence again,
I will list all my installed programs a bit later when i have more time, hopefully everone else can do the same (whether you have the problem or not) then we can see if there's a common program that is on all the XDA2's that might be making them turn on and see if its absent from the XDA2's that are fine
Hi Guys,
was wondering if any of you had seen this happening, or knew how to fix it..
occasionally, like once every two days or so, my pda2 will just not turn on again after it's turned off (put in standby). the only way to turn it back on is to press the reset button. it still seems that the radio is working when its in this state, as if i make a call to the pda, the phone im ringing from rings and rings, but the pda just stays silent, and if i put the pda up to a speaker i can hear the "da dada da da" noises that mean phone radio activity. also if i put the pda in a cradle when its in this state, the battery indicator light on the pda will turn on as if its charging..
i can almost live with the short battery life, but the phone freezing when its turned off i can't. i've tried a hard reset.. to no avail.
any ideas?
Hey ow, what have you got running that could cause it? Any 3rd party bits and pieces?
Kevin
hi kevin.
thats exactly the path im taking now. i have hard reset my device again, and have loaded NOTHING on to it, i reset it before it could install the extRom stuff, and i've only changed settings like vibrate on ring, and regional settings, etc. i haven't even active sync'd it. so far so good (touch wood)
programs i had loaded before:
intellisync (automatically connected to grps if not cradled)
small menu
kbattery
tAgenda (not fully compatible with 2003 SE, but seemed to generally work ok)
worldmate 2004 pro v1.0 (not fully compatible with 2003 SE, but seemed to generally work ok
and thats all i think. i have my suspicions with intellisync..
Hi there
Mine did the very same thing a few times but i just reset it and carried on ...
id recommend upgrading to the newer I-Mate ROM as its more stable, just be prepared to fart about a bit to sort the country code errors and such.
In fact ... i camt remember the last time mine crashed after ive installed the new ROM.
my device came with the rom dated 1/27/05, which is the latest i believe... ?
well, i think i've figured out what causes the problem, thought i might as well give an answer incase anyone else has this prob.
for me appears to happen when GPRS is enabled and i turn the phone off. gprs is turned on in the first place by intellisync, which sync's my email, calander, todo's and contacts with lotus notes. however i tried enabling gprs manually, waited until intellisync sync'd itself, then turned the pda off and went to lunch. after lunch it was frozen again.. i did turn it on at the start of lunch to check the time, and i assume at that point it hadn't tried to do an update, but probably sometime after that and before it froze i would assume it had tried to sync itself.. i guess the next thing to test is if i can just leave gprs on (making sure it doesn't try to do anything) and see how things go.
I have a question. I've only had a WM5 device for about 9 months now. I now have Cingular 8525 and for the past 5 days I have left it on overnight only to find it frozen, won't wake up in the morning and the battery drained.
I did the Activesync hack, scanned the notifications queue and did not see any notifications for midnight on the dates the device would not wake up.
Its frustrating.
I was wondering if WM5 did some form of house cleaning nightly. It seems that this house cleaning wakes up the device and somewhere it freezes on and finally the battery gives out. I don't have any backup software going on.. Nothing. I just find the device won't wake up, won't even soft reset. Plug it in for a minute, then it soft resets with a dead battery.
I am going to look at the notifications queue tonight and delete any notifications I see that are for 0:00 and tomorrow and see what happens.
I am hard resetting it Monday and re-installing if I can't figure it out. It has been really annoying these last 5 mornings.
Sometime when I reboot I see a NO GSM message. Then get no radio, then about 10 minutes later I get service. But the password and the userid on the wap data connection has been erased and my bonded blue tooth headset password is forgotten, the device is there but it prompts me to bond with a passkey when I go to intiate the headset...
Thanks for your thoughts
This has, I believe, alot to do with your microSD card - see the link below.
http://forum.xda-developers.com/showthread.php?t=284636
Thanks I'll check it out. I do have a sd card in the device. It may be the cause.
Thanks.
I use SPB Backup, to initiate automated reboots. What it does is back up to ur microsd and then initiate a reboot. i do this every second night. which is cool, keeps the fone fast.
Nightly lockups were a pain in the neck for me - I have had 2 Orange M3100 and both suffered the same nightly lockup issues.
I found that 4 things have fixed the issues and i found that all 4 have to be done
1. Fake server trick
http://www.aximsite.com/boards/showthread.php?t=112638
But i found that not deleting the new server works fine
2. Untick Enable Advanced Network Functionality
Under Settings\Connections\USB to PC
3. Stopping Activesync running when not needed
In the notification queue there are 3 entries to start replog.exe (activesync)
you can safely delete the instruction to start after time change - This will stop Activesync from running.
NB the other 2 need to be there, do not delete any other notification of replog.exe
4. Never leave activesync running so always do a soft reset after syncing or at least before you charge the phone.
Not saying that these will work for everyone but they have worked for me on both phones.
try XBar. It incorporates cron, so you can schedule whatever program to run whenever you want it. Grap a copy of quickreset and run it. It will reset the Tytn at whatever time you set it for. I have mine resetting at 5 in the morning.
You may disable the standby mode when the unit on the external power supply. I have done, and I think it's not a big deal and it does not worth to struggle with locks on wakeups with external power!
I having a sort of similar 'morning trouble' with my TyTN, but limited to GSM connectivity. When I wake up, I am most of the cases disconnected from network with 'No service' message in the baloon. Searching for network is unsuccessful, nothing works until I soft reset the device.
Just a thought: You do have the "poweroff after x minutes" setting checked right?
I had what I thought was the same issue this morning, but it was caused by me unchecking the above setting (I do this during meetings when I'm using my BT keyboard) the previous day. This morning, while it was still dark out, I pressed the power button and nothing (the backlight was off and this actually put it into powersave mode). I pressed it again and still nothing (device came out of powersave mode with backlight still off). Because it was dark when I did this, I initially thought that I had the "won't return from powersave" problem.
machmandp said:
Nightly lockups were a pain in the neck for me - I have had 2 Orange M3100 and both suffered the same nightly lockup issues.
I found that 4 things have fixed the issues and i found that all 4 have to be done
1. Fake server trick
http://www.aximsite.com/boards/showthread.php?t=112638
But i found that not deleting the new server works fine
2. Untick Enable Advanced Network Functionality
Under Settings\Connections\USB to PC
3. Stopping Activesync running when not needed
In the notification queue there are 3 entries to start replog.exe (activesync)
you can safely delete the instruction to start after time change - This will stop Activesync from running.
NB the other 2 need to be there, do not delete any other notification of replog.exe
4. Never leave activesync running so always do a soft reset after syncing or at least before you charge the phone.
Not saying that these will work for everyone but they have worked for me on both phones.
Click to expand...
Click to collapse
I have a similar problem. Every monring when the device is still plugged on the wall charger, it hangs before I wake up. I would therefore miss a lot of calls or other notifications. I have done the defragmentation of the card, but it still doing the same thing every morning.
I have also tried all your steps above, ecept step 3, which I need your assistance as to how to delete the particular file you were referring to.
Many thanks in advance.
marsb007 said:
try XBar. It incorporates cron, so you can schedule whatever program to run whenever you want it. Grap a copy of quickreset and run it. It will reset the Tytn at whatever time you set it for. I have mine resetting at 5 in the morning.
Click to expand...
Click to collapse
holy crap, i thought i was the only one that used xbar.. i have been using this program for 2 or 3 years, this is my one and only must have program!! FYI 3.2 beta was released
anyway.. on to this problem, i used to have this on my wizard, what i found was that plugging it and leaving it on would cause the lock up. Now when i plug it in i hit the power button and havent experienced it since on my wizard or on my 8525 yet. and i still get all of my push mails etc.. however i will say that if i get a call or text while im sleeping the device does wake up and the screen stays on..
another program you might want to try is SKSchema... they have several scripts that you can run, including a soft reset at a certain time. I also use the script which allows me to toggle between 3G/UMTS to save battery when I don't need 3G.
"Fake Server" did not work for me
Tried what is outlined - fake server, soft-re-boot, stopping activesync. Not sure how to delete the specific files in the notification queue.
Worked for one night! Next night back to the sleeping Tytn.
I am going to try spbTime to trigger an alarm at 12:01am and see if that helps.
TyTn does not "die" anymore!
The fake server is definitely part of the answer. As is stopping ActiveSynch. This needs to be combined with one other suggestion made on the forum of leaving the unit on when plugged in. This however has the potential drawback of "burning" the screen with the same image as when left powered on.
In addition to Activesynch, the problem is with the Notification queue (again as someone suggested on this forum). In the Suspend/Sleep mode under power, the unit cannot notify and goes into a perpetual loop.
Here is what I did that has now worked for 11 days. I installed spb PocketPlus and placed the "Screen Toggle" icon on the main screen. (According to spb, "Toggle" simply blanks the screen but does not put it to sleep/Suspend). So when I plug the unit in to charge it, I simply "toggle" the screen. The screen is blank (just like "Sleep"/"Suspend") but the unit is powered up. This has the added benefit of allowing you to listen to music with the screen blank.
I have now gotten to "toggling" even under battery power. Miraculously, my intermittent BT and Wi Fi issues have also disappeared. There may be cheaper solutions than buying Pocket Plus, but spb's Pocket Plus is convenient and has some other nice features.
Mortsaver might be a cheaper option?
Active Sync
I don't know if any of you have tried Active Sync "beta" 4.5". Its seems to have fixed many of my problems with connection and some of the issues described here.
flane
coolshot said:
This however has the potential drawback of "burning" the screen with the same image as when left powered on.
Click to expand...
Click to collapse
This problem affects CRT and plasma displays (phosphor based), but not TFT.
Hello
Im in a dilemma right now. I absolutely love my touch hd so far but am at a crossroads. I need reliable push mail from my gmail account to my mobile... but so far reliability doesnt seem possible. Would appreciate any sort of guidance.
Im trying to have my gmail send all my mail to my thd device as quickly as possible. I cant afford to wait for it to arrive with a lag of say 10 minutes. It has to be as instantaneous as possible.
The problem with THD i find is that when the display is turned off, the data connection is also turned off. So the next sync only occurs when i turn on the display. When display is turned off... no emails. Ive tried tweakHD in an attempt to keep data connections always turned on, but no luck. Im not sure i set it right though.
Can reliable push mail be achieved on my thd? Should i move over to a blackberry device? (considering blackberry storm) Any help would be appreciated.
thanks
ian
Iangohye, the answer is yes...I had this issue for a long time before solved. The long and short of it is, at least for me, it was a power management problem. I needed my exchange mail, but as soon as I put the phone in standby, it would disconnect the data connection, and would not reconnect until I turned the screen back on. What would happen is, while in standby, my data connection would connect and then something would cause it to immediately disconnect. Some power saving feature. Try this first:
1) Go to programs->phone->menu->options. At the bottom of the screen you will see tabs. Tick the "data" tab and see if the box "disable data connections when device enters sleep mode" is checked. This was unchecked for me so clearly not the issue. Some people, for whatever reason, do not have this option. If you do, and it is not checked then see the next step below, if it is checked, uncheck it and see if that solves it for you.
2) To check whether there is a power saving feature within your power management causing the disconnect in standby go to settings->personal->sounds and notifications. Set a sound for data connection established and data connection disconnect. Set your mail to sync in an interval such as 5 minutes. Put your phone in stadnby (screen off). Once the screen is off, you should hear the data disconnect sound. After five minutes you should hear the data connection established sound and then immediately hear the data disconnect sound. If this is the case.....
3) Install Schaps Advaced Config. Tap his "Power Management" option. In the drop down options, disable all of the power management options and set "AC resuming from suspend" and battery resuming from suspend to 60. Soft reset. Establish a data connections, and put the phone in standby. If your data connection stays on, go through each of the power management options in adavanced config and enable or disable each until you find which one is responsible for leaving your data connection active. The reality is, there are only a couple of options there that cause it, but for the sake of confusion, I would go through them all. Also, for your purposes, I'm not sure whether setting AC and Battery resuming from suspend to 60 is necessary, but I do it anyway.
This is what solved it for me and I hope the same for you.
Hi Sean3
thanks for the help, ive done everything you told me to and it seems like its working as i hoped it would so far.
lol saved me the trouble of switching phones
http://forum.xda-developers.com/showthread.php?t=443125&page=15
Blackberry works great.
Dear all,
I've encountered the following:
I'm a twitter addict and set my client to update the timeline every 5 minutes, but it doesn't (several clients tested) while it's running in the background of WM 6.1. I think it has to do with shutting down the screen, which makes programs temp inactive. Could this be a reasonable explaination? This would explain why my tweets are not updated. It's impossible to leave the screen on, ofcourse, because this would drain the battery. How can I solve this issue (turn off the screen, but keep program active)?
Regards
You might try installing Schaps Advanced Config and play with the power management settings. Most of them should be enabled. You might see if disabling some of them may fix the issue. I disabled PPTP to allow my HD to stay connected to my server while screen off.